Impact of the trailing edge shape of a downstream dummy vehicle on train aerodynamics subjected to crosswind

2020 ◽  
pp. 095440972091503 ◽  
Author(s):  
Xiaoshuai Huo ◽  
Tanghong Liu ◽  
Miao Yu ◽  
Zhengwei Chen ◽  
Zijian Guo ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Detached Eddy Simulation ◽  
Trailing Edge ◽  
Wind Tunnel Tests ◽  
Eddy Simulation ◽  
Pressure Distributions ◽  
Delayed Detached Eddy Simulation ◽  
Yaw Angle ◽  
Train Aerodynamics ◽  
The Impact

Wind tunnel tests for trains under large yaw angles are usually limited due to the width of the wind tunnel. Therefore, the leading car and a downstream dummy vehicle model are often employed instead of a real train, but there are no clear regulations regarding the shape of the end of the dummy vehicle. This paper studied the impact of the trailing edge shape of the downstream dummy vehicle on train aerodynamics subjected to crosswind based on the shear-stress-transport k-ω turbulence model of the delayed detached eddy simulation. Three types of end shapes, namely the rectangular end shape, the arc end shape, and the streamlined end shape were chosen for comparison, and the simulation results of the three-car-group train were selected as the benchmark. First, the reliability of the numerical method was validated by wind tunnel tests. Then, the aerodynamic coefficients under yaw angles of 0°–60° and the surface pressure distributions and flow structures around the train under the yaw angle of 60° of the head cars with different end shapes were compared and analyzed.

Combination of DES and DDES with a Correlation Based Transition Model

2013 ◽  
Vol 444-445 ◽  
pp. 374-379 ◽  
Author(s):  
Lei Qiao ◽  
Jun Qiang Bai ◽  
Jun Hua ◽  
Chen Wang
Keyword(s):  
Present Article ◽  
Test Case ◽  
Transition Model ◽  
Detached Eddy Simulation ◽  
Combined Model ◽  
Trailing Edge ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Stall Angle ◽  
Edge Separation

The present article describes the combination of the correlation based transition model of Menter et al. with the Detached Eddy Simulation (DES) and Delayed Detached Eddy Simulation (DDES) methodology. The interaction between transition model and DES or DDES method was investigated by T3A test case. The grid sensitivity of the combined methodology is discussed and the resolution is given. Then, the simulation of flow over foil of medium thick at stall angle was performed. The combined methodology produce results that have better agreement with experiment comparing to RANS transition model or fully turbulent DES/DDES alone. And the DDES based combined model shows a better agreement with experiment in the simulation of trailing edge separation comparing to DES based combined model.

LES and Hybrid RANS/LES of a Fundamental Trailing Edge Slot

2014 ◽  
Author(s):  
Elizaveta Ivanova ◽  
Gregory M. Laskowski
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Numerical Study ◽  
Mixing Layer ◽  
Detached Eddy Simulation ◽  
Trailing Edge ◽  
Adiabatic Wall ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation

This paper presents the results of a numerical study on the predictive capabilities of Large Eddy Simulation (LES) and hybrid RANS/LES methods for heat transfer, mean velocity, and turbulence in a fundamental trailing edge slot. The geometry represents a landless slot (two-dimensional wall jet) with adjustable slot lip thickness. The reference experimental data taken from the publications of Kacker and Whitelaw [1] [2] [3] [4] contains the adiabatic wall effectiveness together with the velocity and the Reynolds-stress profiles for various blowing ratios and slot lip thicknesses. The simulations were conducted at three different lip thickness and several blowing ratio values. The comparison with the experimental data shows a general advantage of LES and hybrid RANS/LES methods against unsteady RANS. The predictive capability of the tested LES models (dynamic ksgs-equation [5] and WALE [6]) was comparable. The Improved Delayed Detached Eddy Simulation (IDDES) hybrid method [7] also shows satisfactory agreement with the experimental data. In addition to the described baseline investigations, the influence of the inlet turbulence boundary conditions and their implication for the initial mixing layer and heat transfer development were studied for both LES and IDDES.

Experimental and Numerical Investigations of the Heat Transfer and Flow Field in a Trailing Edge Cooling Geometry: Part 2 — LES and Hybrid RANS/LES Study

2015 ◽  
Author(s):  
Elizaveta Ivanova ◽  
Gustavo Ledezma ◽  
Guanghua Wang ◽  
Gregory M. Laskowski
Keyword(s):  
Heat Transfer ◽  
Numerical Study ◽  
Future Research ◽  
Detached Eddy Simulation ◽  
Trailing Edge ◽  
Validation Data ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Adiabatic Cooling ◽  
Les Model

This paper presents the results of a numerical study on the predictive capabilities of Large Eddy Simulation (LES) and hybrid RANS/LES methods for heat transfer in the trailing edge (TE) geometry experimentally investigated in Part 1. The experimental validation data includes 2D wall contours and laterally-averaged values of adiabatic cooling effectiveness. The simulations were conducted at three different blowing ratio values. The comparison with the experimental data shows a general advantage of LES and hybrid RANS/LES methods against steady-state RANS. The results obtained by means of the WALE LES model and the Improved Delayed Detached Eddy Simulation (IDDES) hybrid RANS/LES method were comparable. The presented grid dependence study shows the importance of adequate grid resolution for the predictive capabilities of trailing edge cooling LES. Furthermore, the importance of considering TE slot lands simulation quality in the numerical method assessment is discussed. Potential directions of future research needed to improve simulation reliability are outlined.

A numerical study of aerodynamic characteristics of a high-speed train with different rail models under crosswind

2020 ◽  
pp. 095440972096925
Author(s):  
Zhiwei Jiang ◽  
Tanghong Liu ◽  
Houyu Gu ◽  
Zijian Guo
Keyword(s):  
High Speed ◽  
Numerical Study ◽  
Simulation Method ◽  
Aerodynamic Characteristics ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Pressure Distributions ◽  
Significant Difference ◽  
Aerodynamic Performances ◽  
Yaw Angle

The CFD (Computational Fluid Dynamics) numerical simulation method with the DES (detached eddy simulation) approach was adopted in this paper to investigate and compare the aerodynamic performance, pressure distributions of the train surface, and flow fields near the train model placed above the subgrade with non-rail, realistic rail, and simplified rail models under crosswind. The numerical methods were verified with the wind tunnel tests. Significant differences in aerodynamic performances of the train body and bogie were found in the cases with and without a rail model as the presence of the rail model had significant impacts on the flow field underneath the vehicle. A larger yaw angle can result in a more significant difference in aerodynamic coefficients. The deviations of the train aerodynamic forces and the pressure distribution on the train body with the realistic and simplified rail models were not significant. It was concluded that a rail model is necessary to get more realistic results, especially for large yaw angle conditions. Moreover, a simplified rectangular rail model is suggested to be employed instead of the realistic rail and is capable to get accurate results.

scholarly journals Adaptability of Turbulence Models for Pantograph Aerodynamic Noise Simulation

2019 ◽  
Vol 2019 ◽  
pp. 1-20 ◽  
Author(s):  
Xiao-ming Tan ◽  
Peng-peng Xie ◽  
Zhi-gang Yang ◽  
Jian-yong Gao
Keyword(s):  
Shear Stress ◽  
Wind Tunnel ◽  
High Speed ◽  
Aerodynamic Noise ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Shear Stress Transport ◽  
Delayed Detached Eddy Simulation ◽  
Relative Errors ◽  
Les Model

This study was targeted at CX-PG-type Faiveley pantograph of high-speed train and cylinders and analysed the fluctuating flow field around these objects by using the large eddy simulation (LES) model, the scale adaptive simulation (SAS) model, the improved delayed detached eddy simulation with shear-stress transport-kω (IDDES sst-kω) model, the delayed detached eddy simulation with shear-stress transport-kω (DDES sst-kω) model, and the delayed detached eddy simulation with realizable-kε (DDES R-kε) model. The space distributions of velocity, vorticity, and vortex structures were compared to investigate their performances on simulating fluctuating flow fields and computing aeroacoustic sources through Fourier transformation based on the surface fluctuating pressures. Furthermore, the far-field radiated noise was calculated based on the Ffowcs Williams–Hawkings equation. Based on the computation precision of the five models, a feasible turbulent model was selected for simulating aerodynamic noise. The relative errors to the results from wind-tunnel experiments of the sound pressure level (SPL) were obtained as 0.7%, 1.6%, 7.8%, 3.8%, and 12.1%, respectively, and the peak Strouhal numbers were obtained as 2.0%, 8.5%, 5.5%, 11.5%, and 51.0% for cylinder simulation. Moreover, the relative errors of SAS, IDDES sst-kω, DDES sst-kω, and DDES R-kε models to the result from LES of SPL were respectively obtained as 2.3%, 4.5%, 5.6%, and 10.8% for pantograph. Thus, it is conclusive that none of the aforementioned models are comparable with the LES model with respect to the precision in the aeroacoustic simulation. However, SAS, IDDES sst-kω, and DDES sst-kω are practically competent with the LES model considering the numerical simulations with respect to the engineering computation precision. The numerical computation model was verified using the wind-tunnel test results.

Numerical simulation of the effects of obstacle deflectors on the aerodynamic performance of stationary high-speed trains at two yaw angles

2017 ◽  
Vol 232 (3) ◽  
pp. 913-927 ◽  
Author(s):  
Ji-qiang Niu ◽  
Dan Zhou ◽  
Xi-feng Liang
Keyword(s):  
High Speed ◽  
Simulation Method ◽  
Aerodynamic Performance ◽  
Wake Flow ◽  
Detached Eddy Simulation ◽  
Aerodynamic Forces ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
High Speed Trains ◽  
Yaw Angle

In this study, based on the shear-stress transport κ–ω turbulent model, the improved delayed detached eddy simulation method has been used to simulate the unsteady aerodynamic performance of trains with different obstacle deflectors at two yaw angles (0° and 15°). The numerical algorithm is used and some of the numerical results are verified through wind tunnel tests. By comparing and analysing the obtained results, the effects of the obstacle deflectors on the force of the trains as well as the pressure and flow structure around the trains are elucidated. The results show that the obstacle deflectors primarily affect the flow field at the bottom of the head car as well as the wake flow, and that the internal oblique-type obstacle deflector (IOOD) markedly improves the aerodynamic performance of the trains, by decreasing most of the aerodynamic forces of the train cars and minimising their fluctuations. Further, a nonzero yaw angle weakens or even changes the effect of the IOOD on the aerodynamic forces of the train cars. However, the effect of the IOOD is more on the tail car.

Sign in / Sign up

Export Citation Format

Share Document