A three-dimensional computational study of the effect of the inlet conditions on supersonic mixing and combustion

2012 ◽  
Vol 227 (3) ◽  
pp. 425-435
Author(s):  
Tarek M Abdel-Salam ◽  
Gerald J Micklow
Keyword(s):  
Computational Study ◽  
Three Dimensional ◽  
Supersonic Mixing ◽  
Inlet Conditions

Numerical Insight Into Flow and Thermal Patterns Within an Inlet Profile Generator Comparing to Experimental Results

2006 ◽  
Author(s):  
V. R. Kunze ◽  
M. Wolff ◽  
M. D. Barringer ◽  
K. A. Thole ◽  
M. D. Polanka
Keyword(s):  
Computational Study ◽  
Three Dimensional ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Benchmark Tests ◽  
Annular Combustor ◽  
Inlet Conditions ◽  
Air Force Base ◽  
Turbine Design ◽  
Insight Into

Historically the design of gas turbine engines have not considered the interaction between the combustor and turbine stages. High pressure turbine vane stages have been designed assuming inlet conditions consistent with a standard turbulent boundary layer profile. However, combustor exit flow entering the vane is known to be highly non-uniform in both the primary and secondary flow regimes. In order to develop higher performance, more efficient, longer life stages, turbine design must take into account combustor exit non-uniformities. The Turbine Research Facility (TRF) at Wright-Patterson Air Force Base has installed a non-reactive full scale annular combustor simulator or more accurately a turbine inlet profile generator to study combustor-vane interaction. Several benchmark tests have been performed on the profile generator consisting of a Taguchi type matrix wherein nine independent variables were adjusted. Supplementing the experimental research at the TRF, a steady state, unstructured, fully three-dimensional CFD analysis was performed. This paper will make comparisons between the CFD and experimental profiles generated by the simulator. Furthermore, the computational study will help to give an understanding of the aerodynamic and aerothermal environment within the generator that experimental instrumentation alone cannot.

Three-Dimensional Computational Study of Natural Convection in a Non-Uniformly Heated Vertical Open-Ended Channel

2014 ◽  
Author(s):  
Oxana A. Tkachenko ◽  
Svetlana A. Tkachenko ◽  
Victoria Timchenko ◽  
John A. Reizes ◽  
Guan Heng Yeoh ◽  
...  
Keyword(s):  
Natural Convection ◽  
Computational Study ◽  
Three Dimensional

Wake Flow of Single and Multiple Yawed Cylinders

2004 ◽  
Vol 126 (5) ◽  
pp. 861-870 ◽  
Author(s):  
A. Thakur ◽  
X. Liu ◽  
J. S. Marshall
Keyword(s):  
Computational Study ◽  
Three Dimensional ◽  
Side Wall ◽  
Wake Flow ◽  
Upstream Region ◽  
Two Dimensional ◽  
Cylinder Wake ◽  
Dimensional Approximation ◽  
The Face ◽  
Drag And Lift

An experimental and computational study is performed of the wake flow behind a single yawed cylinder and a pair of parallel yawed cylinders placed in tandem. The experiments are performed for a yawed cylinder and a pair of yawed cylinders towed in a tank. Laser-induced fluorescence is used for flow visualization and particle-image velocimetry is used for quantitative velocity and vorticity measurement. Computations are performed using a second-order accurate block-structured finite-volume method with periodic boundary conditions along the cylinder axis. Results are applied to assess the applicability of a quasi-two-dimensional approximation, which assumes that the flow field is the same for any slice of the flow over the cylinder cross section. For a single cylinder, it is found that the cylinder wake vortices approach a quasi-two-dimensional state away from the cylinder upstream end for all cases examined (in which the cylinder yaw angle covers the range 0⩽ϕ⩽60°). Within the upstream region, the vortex orientation is found to be influenced by the tank side-wall boundary condition relative to the cylinder. For the case of two parallel yawed cylinders, vortices shed from the upstream cylinder are found to remain nearly quasi-two-dimensional as they are advected back and reach within about a cylinder diameter from the face of the downstream cylinder. As the vortices advect closer to the cylinder, the vortex cores become highly deformed and wrap around the downstream cylinder face. Three-dimensional perturbations of the upstream vortices are amplified as the vortices impact upon the downstream cylinder, such that during the final stages of vortex impact the quasi-two-dimensional nature of the flow breaks down and the vorticity field for the impacting vortices acquire significant three-dimensional perturbations. Quasi-two-dimensional and fully three-dimensional computational results are compared to assess the accuracy of the quasi-two-dimensional approximation in prediction of drag and lift coefficients of the cylinders.

scholarly journals Crystal Structure and Computational Study on Methyl-3-Aminothiophene-2-Carboxylate

Crystals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 19 ◽  
Author(s):  
Yaping Tao ◽  
Ligang Han ◽  
Andong Sun ◽  
Kexi Sun ◽  
Qian Zhang ◽  
...  
Keyword(s):  
Crystal Packing ◽  
Computational Study ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
Dispersion Energy ◽  
Monoclinic Crystal ◽  
Hydrogen Bond Interactions ◽  
Calculation Results ◽  
Reduced Density Gradient ◽  
Reduced Density

Methyl-3-aminothiophene-2-carboxylate (matc) is a key intermediate in organic synthesis, medicine, dyes, and pesticides. Single crystal X-ray diffraction analysis reveals that matc crystallizes in the monoclinic crystal system P21/c space group. Three matc molecules in the symmetric unit are crystallographically different and further linked through the N–H⋯O and N–H⋯N hydrogen bond interactions along with weak C–H⋯S and C–H⋯Cg interactions, which is verified by the three-dimensional Hirshfeld surface, two-dimensional fingerprint plot, and reduced density gradient (RDG) analysis. The interaction energies within crystal packing are visualized through dispersion, electrostatic, and total energies using three-dimensional energy-framework analyses. The dispersion energy dominates in crystal packing. To better understand the properties of matc, electrostatic potential (ESP) and frontier molecular orbitals (FMO) were also calculated and discussed. Experimental and calculation results suggested that amino and carboxyl groups can participate in various inter- and intra-interactions.

scholarly journals Numerical Simulation of the Coagulation Dynamics of Blood

2008 ◽  
Vol 9 (2) ◽  
pp. 83-104 ◽  
Author(s):  
T. Bodnár ◽  
A. Sequeira
Keyword(s):  
Blood Coagulation ◽  
Computational Study ◽  
Time Integration ◽  
Three Dimensional ◽  
Circular Cross Section ◽  
Clot Formation ◽  
Diffusion Reaction ◽  
Numerical Code ◽  
Injured Region ◽  
Reaction Equations

The process of platelet activation and blood coagulation is quite complex and not yet completely understood. Recently, a phenomenological meaningful model of blood coagulation and clot formation in flowing blood that extends existing models to integrate biochemical, physiological and rheological factors, has been developed. The aim of this paper is to present results from a computational study of a simplified version of this coupled fluid-biochemistry model. A generalized Newtonian model with shear-thinning viscosity has been adopted to describe the flow of blood. To simulate the biochemical changes and transport of various enzymes, proteins and platelets involved in the coagulation process, a set of coupled advection–diffusion–reaction equations is used. Three-dimensional numerical simulations are carried out for the whole model in a straight vessel with circular cross-section, using a finite volume semi-discretization in space, on structured grids, and a multistage scheme for time integration. Clot formation and growth are investigated in the vicinity of an injured region of the vessel wall. These are preliminary results aimed at showing the validation of the model and of the numerical code.

Design of an Intermediate Turbine Duct Downstream of a High Pressure Turbine

2016 ◽  
Author(s):  
Chaoshan Hou ◽  
Hu Wu
Keyword(s):  
High Pressure ◽  
Three Dimensional ◽  
Low Pressure ◽  
Aerodynamic Load ◽  
Duct Flow ◽  
Original Design ◽  
High Pressure Turbine ◽  
Intermediate Turbine Duct ◽  
Low Pressure Turbine ◽  
Inlet Conditions

The flow leaving the high pressure turbine should be guided to the low pressure turbine by an annular diffuser, which is called as the intermediate turbine duct. Flow separation, which would result in secondary flow and cause great flow loss, is easily induced by the negative pressure gradient inside the duct. And such non-uniform flow field would also affect the inlet conditions of the low pressure turbine, resulting in efficiency reduction of low pressure turbine. Highly efficient intermediate turbine duct cannot be designed without considering the effects of the rotating row of the high pressure turbine. A typical turbine model is simulated by commercial computational fluid dynamics method. This model is used to validate the accuracy and reliability of the selected numerical method by comparing the numerical results with the experimental results. An intermediate turbine duct with eight struts has been designed initially downstream of an existing high pressure turbine. On the basis of the original design, the main purpose of this paper is to reduce the net aerodynamic load on the strut surface and thus minimize the overall duct loss. Full three-dimensional inverse method is applied to the redesign of the struts. It is revealed that the duct with new struts after inverse design has an improved performance as compared with the original one.

Three-dimensional computational study in a corrugated pipe inserted system filled with phase change material

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ömer Akbal ◽  
Hakan F. Öztop ◽  
Nidal H. Abu-Hamdeh
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Computational Analysis ◽  
Computational Study ◽  
Three Dimensional ◽  
Simple Algorithm ◽  
Melting Time ◽  
Geometrical Parameters ◽  
Content Type ◽  
Change Material

Purpose The purpose of this paper is to make a three-dimensional computational analysis of melting in corrugated pipe inserted system filled with phase change material (PCM). The system was heated from the inner pipe, and temperature of the outer pipe was lower than that of inner pipe. Different geometrical ratio cases and two different temperature differences were tested for their effect on melting time. Design/methodology/approach A computational analysis through a pipe with corrugated pipe filled with PCM is analyzed. Finite volume method was applied with the SIMPLE algorithm method to solve the governing equations. Findings The results indicate that the geometrical parameters can be used to control the melting time inside the heat exchanger which, in turn, affect the energy efficiency. The fastest melting time is seen in Case 4 at the same temperature difference which is the major observation of the current work. Originality/value Originality of this work is to perform a three-dimensional analysis of melting of PCM in a corrugated pipe inserted pipe.

Sign in / Sign up

Export Citation Format

Share Document