Experimental research on pumping losses and combustion performance in an unthrottled spark ignition engine

2018 ◽  
Vol 232 (7) ◽  
pp. 888-897 ◽  
Author(s):  
Tingting Sun ◽  
Yingjie Chang ◽  
Zongfa Xie ◽  
Kaiyu Zhang ◽  
Fei Chen ◽  
...  
Keyword(s):  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Combustion Characteristic ◽  
Spark Ignition Engines ◽  
Intake Valve ◽  
Valve System ◽  
Combustion Performance ◽  
Intake Swirl ◽  
Variable Valve

A novel fully hydraulic variable valve system is described in this paper, which achieves continuous variations in maximum valve lift, valve opening duration, and the timing of valve closing. The load of the unthrottled spark ignition engine with fully hydraulic variable valve system is controlled by using an early intake valve closing rather than the conventional throttle valve. The experiments were carried out on BJ486EQ spark ignition engine with fully hydraulic variable valve system. Pumping losses of the throttled and unthrottled spark ignition engines at low-to-medium loads are compared and the reason of it decreasing significantly in the unthrottled spark igntion engine is analyzed. The combustion characteristic parameters, such as cyclic variation, CA50, and heat release rate, were analyzed. The primary reasons for the lower combustion rate in the unthrottled spark ignition engines are discussed. In order to improve the evaporation of fuel and mix with air in an unthrottled spark ignition engine, the in-cylinder swirl is organized with a helical intake valve, which can generate a strong intake swirl at low intake valve lifts. The effects of the intake swirl on combustion performance are investigated. Compared with the throttled spark ignition engine, the brake specific fuel consumption of the improved unthrottled spark ignition engine is reduced by 4.1% to 11.2%.

Effect of intake swirl on combustion performance in an unthrottled spark ignition engine

2018 ◽  
Vol 233 (5) ◽  
pp. 1269-1279
Author(s):  
Kaiyu Zhang ◽  
Yingjie Chang ◽  
Zongfa Xie ◽  
Tingting Sun ◽  
Fei Chen
Keyword(s):  
Combustion Rate ◽  
Fuel Injection ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Intake Port ◽  
Intake Valve ◽  
Port Fuel Injection ◽  
Air Mixing ◽  
Intake Swirl

A Fully Hydraulic Variable Valve System is described in this article which can achieve continuous variation in valve lift, duration, and timing. The system was installed in a four-cylinder port fuel injection spark ignition engine and achieved unthrottled load control through early intake valve closing. The in-cylinder pressure measured experimentally showed that pumping losses of the unthrottled spark ignition engine at 2000 r/min and 0.189 MPa brake mean effective pressure was reduced by 85.4% compared with the throttled spark ignition engine. However, its slow and unstable combustion reduced the indicated thermal efficiency. Compared with the throttled spark ignition engine, the amount of residual exhaust flowing back into the intake port was greatly reduced at the early stage of the intake process. Consequently, it negatively influenced fuel evaporation and fuel–air mixing processes in the intake port of the port fuel injection spark ignition engine and decreased the flow of in-cylinder gases, which resulted in a low combustion rate. A new centrosymmetric helical valve is proposed in this article to improve the fuel–air mixing and combustion rate of the unthrottled spark ignition engine. The experiments demonstrate that the helical valve can generate a strong intake swirl at small intake valve lift. It helps to increase combustion rate and lower cycle-to-cycle variation, which improves indicated thermal efficiency and fuel economy of the unthrottled spark ignition engine at low load.

scholarly journals Comparative analysis of the fluid dynamic efficiency of standard and alternative intake strategies for multivalve spark-ignition engines

2013 ◽  
Vol 2 (2) ◽  
pp. 140 ◽  
Author(s):  
Angelo Algieri
Keyword(s):  
Combustion Engine ◽  
Fluid Dynamic ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Valve Lift ◽  
Spark Ignition Engines ◽  
Dynamic Efficiency ◽  
Noticeable Effect ◽  
Dynamic Performances ◽  
Experimental Characterisation

The work aims at investigating the fluid dynamic performances of a multivalve spark-ignition engine and at evaluating the influence of the throttling process on the engine permeability. To this purpose, a production four-stroke internal combustion engine is analysed during the intake phase. The experimental characterisation is carried out at the steady flow rig in terms of dimensionless discharge and flow coefficients. The global investigation illustrates the noticeable effect of the valve lift on the engine head breathability. Furthermore, the experimental analysis demonstrates that the throttling process has a significant influence on the volumetric efficiency of the intake system and this effect increases with the valve lift. Finally, alternative strategies are studied in order to improve the engine fluid dynamic efficiency at partial loads. Specifically, the research shows that inlet valve deactivation and the adoption of asymmetric intake valve lifts assure an increase in head permeability.

A novel volumetric efficiency model for spark ignition engines equipped with variable valve timing and variable valve lift Part 1: model development

2016 ◽  
Vol 231 (2) ◽  
pp. 175-191 ◽  
Author(s):  
Amir Hasan Kakaee ◽  
Behrooz Mashadi ◽  
Mostafa Ghajar
Keyword(s):  
Experimental Data ◽  
Spark Ignition ◽  
Volumetric Efficiency ◽  
Valve Lift ◽  
Variable Valve Timing ◽  
Spark Ignition Engines ◽  
Valve Timing ◽  
Real Time Applications ◽  
Variable Valve Lift ◽  
Variable Valve

Estimation of the air charge and the volumetric efficiency is one of the most challenging tasks in the control of internal-combustion engines owing to the intrinsic complexity and the non-linearity of the gas flow phenomena. In particular, with emerging new technologies such as systems with variable valve timing and variable valve lift, the number of effective parameters increases greatly, making the estimation task more complicated. On the other hand, using a three-way catalyst converter needs strict control of the air-to-fuel ratio to around the stoichiometric ratio, and hence more accurate models are required for estimation of the air charge. Therefore, various models have been proposed in the literature for estimation of the volumetric efficiency and the air charge. However, they are either strictly based on physical first principles, making them impractical for conventional applications, or nearly fully empirical and need many experimental data for calibration. In this paper, using a novel approach, a new semiempirical model is proposed for estimation of the volumetric efficiency, which is calibrated with very few experimental data and can be used easily for real-time applications. In addition to the valve timings, the engine speed and the intake manifold pressure, the inlet valve lift is also considered as the model input. The generalizability of the model is proved by applying it to estimate the volumetric efficiency of six different engines. Furthermore, a systematic approach is taken to simplify the proposed model and to strengthen its prediction capability. The result is a simple, practical and generalizable model which can be used for various spark ignition engines, can be trained with very few data and can be utilized for estimating accurately the volumetric efficiency in real-time applications.

scholarly journals Ethanol/Gasoline Blends as Alternative Fuel in Last Generation Spark-Ignition Engines: A Review on CO and HC Engine Out Emissions

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 4034
Author(s):  
Paolo Iodice ◽  
Massimo Cardone
Keyword(s):  
Physicochemical Properties ◽  
Alternative Fuels ◽  
Experimental Studies ◽  
Alternative Fuel ◽  
Exhaust Emissions ◽  
Spark Ignition ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Spark Ignition Engines ◽  
The Impact

Among the alternative fuels existing for spark-ignition engines, ethanol is considered worldwide as an important renewable fuel when mixed with pure gasoline because of its favorable physicochemical properties. An in-depth and updated investigation on the issue of CO and HC engine out emissions related to use of ethanol/gasoline fuels in spark-ignition engines is therefore necessary. Starting from our experimental studies on engine out emissions of a last generation spark-ignition engine fueled with ethanol/gasoline fuels, the aim of this new investigation is to offer a complete literature review on the present state of ethanol combustion in last generation spark-ignition engines under real working conditions to clarify the possible change in CO and HC emissions. In the first section of this paper, a comparison between physicochemical properties of ethanol and gasoline is examined to assess the practicability of using ethanol as an alternative fuel for spark-ignition engines and to investigate the effect on engine out emissions and combustion efficiency. In the next section, this article focuses on the impact of ethanol/gasoline fuels on CO and HC formation. Many studies related to combustion characteristics and exhaust emissions in spark-ignition engines fueled with ethanol/gasoline fuels are thus discussed in detail. Most of these experimental investigations conclude that the addition of ethanol with gasoline fuel mixtures can really decrease the CO and HC exhaust emissions of last generation spark-ignition engines in several operating conditions.

Laminar flame speed correlations for methane, ethane, propane and their mixtures, and natural gas and gasoline for spark-ignition engine simulations

2017 ◽  
Vol 18 (9) ◽  
pp. 951-970 ◽  
Author(s):  
Riccardo Amirante ◽  
Elia Distaso ◽  
Paolo Tamburrano ◽  
Rolf D Reitz
Keyword(s):  
Natural Gas ◽  
Laminar Flame ◽  
Spark Ignition ◽  
Flame Speed ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Computational Time ◽  
Laminar Flame Speed ◽  
Spark Ignition Engines ◽  
Empirical Correlations

The laminar flame speed plays an important role in spark-ignition engines, as well as in many other combustion applications, such as in designing burners and predicting explosions. For this reason, it has been object of extensive research. Analytical correlations that allow it to be calculated have been developed and are used in engine simulations. They are usually preferred to detailed chemical kinetic models for saving computational time. Therefore, an accurate as possible formulation for such expressions is needed for successful simulations. However, many previous empirical correlations have been based on a limited set of experimental measurements, which have been often carried out over a limited range of operating conditions. Thus, it can result in low accuracy and usability. In this study, measurements of laminar flame speeds obtained by several workers are collected, compared and critically analyzed with the aim to develop more accurate empirical correlations for laminar flame speeds as a function of equivalence ratio and unburned mixture temperature and pressure over a wide range of operating conditions, namely [Formula: see text], [Formula: see text] and [Formula: see text]. The purpose is to provide simple and workable expressions for modeling the laminar flame speed of practical fuels used in spark-ignition engines. Pure compounds, such as methane and propane and binary mixtures of methane/ethane and methane/propane, as well as more complex fuels including natural gas and gasoline, are considered. A comparison with available empirical correlations in the literature is also provided.

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

Sign in / Sign up

Export Citation Format

Share Document