Quantifying the equilibrium swelling responses and swelling-induced snap-through of heterogeneous spherical hydrogels

2020 ◽  
Vol 32 (1) ◽  
pp. 113-123
Author(s):  
Huiming Wang ◽  
Jianpeng Yang
Keyword(s):  
Material Properties ◽  
Deformation Theory ◽  
External Surface ◽  
Internal Surface ◽  
Free Energy Function ◽  
Equilibrium Swelling ◽  
Limiting Chain Extensibility ◽  
Gent Model ◽  
Finite Deformation Theory ◽  
Nonlinear Behaviors

We employ the finite deformation theory to analyze the inhomogeneous large deformation of a heterogeneous spherical hydrogel subjected to chemo-mechanical loadings. The heterogeneous spherical hydrogel is composed of two concentric spherical hydrogel layers with different material properties. The Gent model is employed for the free energy function of the polymer stretching part in order to tackle the effect of the limiting chain extensibility. The heterogeneous spherical hydrogel is assumed to be perfectly bonded at the interface and is traction free at the external surface. At the internal surface, two boundary conditions are considered: one is internally fixed and the other is internally pressurized. Numerical examples are performed to describe the nonlinear behaviors of a heterogeneous spherical hydrogel when subjected to the swelling and mechanical loadings. For internally fixed case, numerical results show that the limiting chain extensibility and the initial swelling ratio have significant effect on the actuation deformation of a heterogeneous spherical hydrogel. For internally pressurized case, we find that the swelling-induced snap-through instability can be triggered under specified conditions. It is shown that the chemo-mechanical behaviors of the heterogeneous spherical hydrogels can be adjusted by tuning the material properties and the initial swelling ratios.

Temperature Analysis of Piercing Process Based on Material Properties in Diescher's Mill with Finite Element Method

2013 ◽  
Vol 830 ◽  
pp. 93-96 ◽  
Author(s):  
Lu Lu ◽  
Hong Xia Cui
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Material Properties ◽  
External Surface ◽  
Three Dimensional ◽  
Internal Surface ◽  
Work Piece ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Element Method

In this paper, the simulation of the piercing process is performed by the three-dimensional finite-element method in Dieschers mill. The material properties of steel 33Mn2V are introduced. The simulated results visualize dynamic evolution of temperature, especially inside the workpiece. Its show the distribution of temperature on the internal and external surface of the work-piece is non-uniform. The temperature of the internal surface is far higher than that of the external surface of workpiece.

Kerusakan Pada Material Pipa Air Bersih Akibat General Corrosion

2019 ◽  
Vol 16 (2) ◽  
Author(s):  
M. N. Setia Nusa
Keyword(s):  
Chemical Composition ◽  
Failure Analysis ◽  
External Surface ◽  
Internal Surface ◽  
General Corrosion ◽  
Water Pipe ◽  
Corrosion Attack ◽  
Corrosion Failure ◽  
Environment Factor

Water pipe of 4.5” diameter and has been operated for 8 year having failure due to corrosion attack on its external and internal surface. It is conducted failure analysis to find out the cause of corrosion by having testing examination of visual fractography, metalography,, SEM EDAX, hardness and chemical composition. Testing and examination results show that the failure / corroded pipe has a for in of general corrosion on the external surface due to environment factor or ground factor arround the pipe and on the internal surface was influenced by excessive root weld creating protrude which then causing turbolens and deposite to accelerate corrosion attack.Pipa berdiameter 4.5” yang berfungsi mengalirkan air bersih dan telah beroperasi selama 8 tahun, terjadi kerusakan berbentuk korosi pada permukaan luar pipa dan permukaan dalam. Untuk itu dilakukan analisa kerusakan untuk mengetahui penyebab terjadinya korosi dengan pengujian dan pemeriksaan secara visual,Fractography, Metallography, SEM, EDAX, Uji Kekerasan dan Uji Komposisi Kimia. Hasil pemeriksaan dan pengujian pada pipa yang rusak / korosi berbentuk jenis general korosi pada permukaan luar pipa yang diakibatkan faktor lingkungan atau tanah disekitar pipa, sedangkan pada bagian dalam pipa dipengaruhi oleh adanya lelehan pengelasan yang kurang sempurna sehingga menimbulkan benjolan yang mengakibatkan aliran air didalam pipa tidak lancar sehingga terjadi turbolensi yang menimbulkan endapan dan mengakibatkan percepatan terjadinya korosi.Keywords: Pipe, environtment, turbolens, corrosion, failure

scholarly journals Experimental Determination of the Heat Transfer Coefficient of Real Cooled Geometry Using Linear Regression Method

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 180
Author(s):  
Asif Ali ◽  
Lorenzo Cocchi ◽  
Alessio Picchi ◽  
Bruno Facchini
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Heat Transfer Coefficient ◽  
Linear Regression ◽  
Surface Temperature ◽  
Transfer Coefficient ◽  
External Surface ◽  
Internal Surface ◽  
Regression Method ◽  
Thermal Transient

The scope of this work was to develop a technique based on the regression method and apply it on a real cooled geometry for measuring its internal heat transfer distribution. The proposed methodology is based upon an already available literature approach. For implementation of the methodology, the geometry is initially heated to a known steady temperature, followed by thermal transient, induced by injection of ambient air to its internal cooling system. During the thermal transient, external surface temperature of the geometry is recorded with the help of infrared camera. Then, a numerical procedure based upon a series of transient finite element analyses of the geometry is applied by using the obtained experimental data. The total test duration is divided into time steps, during which the heat flux on the internal surface is iteratively updated to target the measured external surface temperature. The final procured heat flux and internal surface temperature data of each time step is used to find the convective heat transfer coefficient via linear regression. This methodology is successfully implemented on three geometries: a circular duct, a blade with U-bend internal channel, and a cooled high pressure vane of real engine, with the help of a test rig developed at the University of Florence, Italy. The results are compared with the ones retrieved with similar approach available in the open literature, and the pros and cons of both methodologies are discussed in detail for each geometry.

scholarly journals Plasma Catalysis: Distinguishing between Thermal and Chemical Effects

Catalysts ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 185 ◽  
Author(s):  
Guido Giammaria ◽  
Gerard van Rooij ◽  
Leon Lefferts
Keyword(s):  
Gas Phase ◽  
Surface Area ◽  
Thermal Effects ◽  
External Surface ◽  
Plasma Chemistry ◽  
Internal Surface ◽  
Plasma Power ◽  
External Surface Area ◽  
Internal Surface Area ◽  
Chemical Effects

The goal of this study is to develop a method to distinguish between plasma chemistry and thermal effects in a Dielectric Barrier Discharge nonequilibrium plasma containing a packed bed of porous particles. Decomposition of CaCO3 in Ar plasma is used as a model reaction and CaCO3 samples were prepared with different external surface area, via the particle size, as well as with different internal surface area, via pore morphology. Also, the effect of the CO2 in gas phase on the formation of products during plasma enhanced decomposition is measured. The internal surface area is not exposed to plasma and relates to thermal effect only, whereas both plasma and thermal effects occur at the external surface area. Decomposition rates were in our case found to be influenced by internal surface changes only and thermal decomposition is concluded to dominate. This is further supported by the slow response in the CO2 concentration at a timescale of typically 1 minute upon changes in discharge power. The thermal effect is estimated based on the kinetics of the CaCO3 decomposition, resulting in a temperature increase within 80 °C for plasma power from 0 to 6 W. In contrast, CO2 dissociation to CO and O2 is controlled by plasma chemistry as this reaction is thermodynamically impossible without plasma, in agreement with fast response within a few seconds of the CO concentration when changing plasma power. CO forms exclusively via consecutive dissociation of CO2 in the gas phase and not directly from CaCO3. In ongoing work, this methodology is used to distinguish between thermal effects and plasma–chemical effects in more reactive plasma, containing, e.g., H2.

Sign in / Sign up

Export Citation Format

Share Document