Production of High Fructose Syrup from Cassava and Sweet Potato Flours and their Blends with Cereal Flours

2010 ◽  
Vol 16 (3) ◽  
pp. 251-258 ◽  
Author(s):  
Regy Johnson ◽  
S.N. Moorthy ◽  
G. Padmaja

Despite being a rich source of starch, root crops such as cassava and sweet potato have not been widely exploited for the production of high fructose syrup (HFS), which is a highly valued sweetener for the food and beverage industries. The major factors contributing to the cost of production of HFS are the cost and labor-intensive steps in the production of starch, different processing temperatures and pH for the enzyme reactions, poor extractability of starch, etc. With the objective of overcoming the cost associated with the preparation of starch, the feasibility of using native cassava/sweet potato flours and their blends with rice flour and wheat flour, as the raw material for HFS production was investigated. The saccharified slurry from cassava-rice flour blends contained 70-72 g reducing sugars/100 g, which was higher than that released from native cassava flour (∼69%). Blends of sweet potato with rice or wheat yielded saccharified mash with lower content of reducing sugars (60-66%). Although the percentage conversion to fructose after isomerization was similar for cassava/sweet potato or their blends with cereal flours (42-43%), fructose yield was higher in native cassava flour and cassava-rice blends (28-29 g/100 g) than the other flour blends.

2017 ◽  
Vol 23 (6) ◽  
pp. 5775-5779 ◽  
Author(s):  
Ayu Ratna Permanasari ◽  
Fitria Yulistiani ◽  
Nancy Siti Djenar

Author(s):  
Aniswatul Khamidah

<p>ABSTRACT</p><p>Preference of Processed Purple Sweet Potato and Cassava in Madiun District. Through<br />Sustainable Reserved Food Garden Model (SRFGM), women farmers group "Karya Mulya" was introduced to the technology of purple sweet potato and cassava processing, which have not been utilized optimally. This assessment aimed to determine the farmers’ acceptance of the introduced technologies, to know the most preferred product along<br />with chemical and sensory quality and to know the ranking of product preferences with the influencing factors. This assessment was carried out in the Wonorejo village and Assessment Institute of Agricultural Technology (AIAT) East Java, using a randomized block design with 28 replicates. The treatments tested were purple sweet potato flour, purple<br />sweet potato ice cream, purple sweet potato jams, purple sweet potato french fries, modified cassava flour, noodles, stick and brownies from modified cassava flour. Parameters observed were women farmer acceptance and preference of the processed technologies that have been introduced, the ranking of product preferences with the factors that influence and the nutrient composition. The assessment resulted that the farmers’ responses especially on the "easiness of processing" was 3.67-4.90; "easiness of obtaining raw materials" was from 3.38 to 4.95 (easy to very easy). The consumer preference value of the purple sweet potato products was on the range of 3.81 to 4.57 (like to very like). The rank of most preferred products were ice cream, french fries, jam and flour respectively. Ice cream had the highest preference containing of 64.93%; ash 2.15%; fat 2.20%; protein 2.94%; carbohydrate 27.78%; calories 142.70 cal/100 g and anthocyanins 0.23 mg/g. The panelist preference value of cassava products was between 4.05 and 4.524 (like to very like). For cassava product, the rank of the most favored products were brownies, noodles, stick and mocaf.<br />Brownies encompassed the highest value with the water content of 30.11%; ash 1.78%; protein 5.88%; fat 19.20%;<br />carbohydrates 43.02% and calories 368.43 cal/100 g. Factors that affecting adoption of technology are the simplicity of raw material (50%), easiness of process (44.44%), efficiency of labor (5.556%) and the simplicity of tool.</p><p>Keywords: purple sweet potatoes, cassava, organoleptic test</p><p>ABSTRAK</p><p>Melalui Kegiatan Model Kawasan Rumah Pangan Lestari (M-KRPL), kelompok wanita tani (KWT) “Karya Mulya” diperkenalkan teknologi olahan ubikayu dan ubi jalar ungu, yang selama ini pemanfaatannya belum optimal.<br />Pengkajian bertujuan mengetahui penerimaan wanita tani terhadap teknologi yang diintroduksikan, mengetahui produk yang paling disukai beserta mutu kimia dan ensorisnya, serta mengetahui peringkat kesukaan produk dan faktor yang mempengaruhinya. Kegiatan dilaksanakan di Desa Wonorejo Kabupaten Madiun dan BPTP Jawa Timur, menggunakan Rancangan Acak Kelompok (RAK), 28 kali ulangan. Perlakuan yang diujikan yaitu tepung ubi jalar ungu, es krim ubi jalar ungu, selai ubi jalar ungu, french fries ubijalar ungu, tepung ubikayu termodifikasi, mie, stick dan brownies dari tepung ubikayu termodifikasi. Parameter yang diamati yaitu penerimaan dan preferensi wanita tani terhadap teknologi yang diintroduksikan, peringkat kesukaan produk dan faktor yang mempengaruhinya, serta<br />komposisi nutrisi produk terpilih. Hasil pengkajian menunjukkan bahwa penilaian petani mengenai teknologi yang diintroduksikan terutama “kemudahan cara pengolahan”, “kemudahan memperoleh bahan baku” berturut-turut sebesar 3,67-4,90; dan 3,38-4,95 (mudah sampai sangat mudah). Tingkat kesukaan konsumen pada olahan ubi jalar ungu<br />sebesar 3,81-4,57 (suka sampai sangat suka). Urutan olahan ubi jalar ungu dari yang paling disukai yaitu es krim, french fries, selai, dan tepung ubi jalar ungu. Es krim menempati nilai kesukaan tertinggi, dengan nilai kadar air 64,93%; abu 2,15%; lemak 2,20%; protein 2,94%; karbohidrat 27,78%; kalori 142,70 kal/100 gr; dan antosianin 0,23<br />mg/g. Tingkat kesukaan panelis terhadap olahan ubikayu sebesar 4,05 sampai 4,524 (suka sampai sangat suka).<br />Peringkat kesukaan olahan ubikayu dari yang paling disukai yaitu brownies, mie, stick dan tepung ubikayu termodifikasi. Brownies menempati nilai kesukaan tertinggi dengan nilai kadar air 30,11%; abu 1,78%; protein 5,88%; lemak 19,20%; karbohidrat 43,02% dan kalori 368,43 kal/100 gr. Faktor yang mempengaruhi adopsi teknologi yaitu kesederhanaan bahan (50%), kemudahan proses (44,44%), efisiensi tenaga kerja (5,556%) dan kesederhanaan alat.</p><p>Kata kunci: ubijalar ungu, ubikayu, uji organoleptik</p>


2019 ◽  
Vol 2 (1) ◽  
pp. 101-107
Author(s):  
Dominikus Djago Djoa ◽  
Bambang Susila Hadi ◽  
I Gede Aryana Mahayasa

Tujuan pendirian pabrik ini adalah : Pemenuhan kebutuhan bahan pemanis sirup fruktosa di dalam negeri, meningkatkan devisa negara di sektor industry, memperluas volume produktifitas terutama bagi industri yang memerlukan sirup fruktosa. Proses pembuatan HFS dari menir dengan cara isomerisasi dibagi menjadi tiga tahap : pretreatment, hidrolisa dan isomerisasi menggunakan enzim glucoisomerisasi. Aspek kelayakan pra rencana pabrik HFS : (1) aspek ekonomi yaitu Pay Out Time, Rate of Return dan Break even Point; (2) aspek proses; (3) aspek teknik; (4) aspek manajemen perusahaan. Pra rencana pabrik HFS dalam perencanaan adalah semi kontinyu, 24 jam per hari dengan 300 hari kerja/tahun, kapasitas produksi 9475,76 ton sirup/tahun, bahan baku 2700 ton menir/tahun, konsumsi air 2308 m3/hari, steam 663 ton/hari dan listrik 150 KVA, pembiayaan modal tetap Rp. 16,17 M dan modal kerja Rp. 3,3M, hasil penjualan Rp. 23,69 M, investasi total pada akhir masa konstruksi Rp. 21,32M, laju pengembalian modal 17,83%, waktu pengembalian modal 4,41 tahun, titik impas 40,52% dan masa konstruksi 2 tahun. Secara keseluruhan dipandang dari segi teknis maupun ekonomi dapat dikatakan pra rencana pabrik High Fructose Syrup dari menir dapat dilanjutkan ke dalam tahap perencanaan.   The purpose of the establishment of the factory was to meet the needs of fructose syrup in the country, increasing the country's foreign exchange in the industrial sector, expanding the productivity volume especially for industries that requires fructose syrup. The process of making high fructose syrup (HFS) from the menir by isomerization was divided into three stages: pretreatment, hydrolysis, and isomerization using glucoisomerization enzymes. Pre-feasibility aspects of HFS factory plans were: (1) economic aspects Pay Out Time, Rate of Return and Break even Point; (2) process aspects; (3) technical aspects; (4) aspects of company management. The pre plan of the HFS factory in planning was semi-continuous, 24 hours per day with 300 working days/year, production capacity of 9475.76 tons of syrup/year, raw material of 2,700 tons of menir/year, water consumption of 2,308 m3/day, steam of 663 tons/days and 150 KVA electricity, fixed capital financing of Rp. 16.17 M and working capital of Rp. 3.3M, sales of Rp. 23.69 M, Rp. 21.32M of total investment at the end of the construction period, 17.83%, rate of return on capital, 4.41 years of capital payback period, 40.52% break-even point and 2 year construction period. Overall, in terms of technical and economic aspects, it could be said that the pre-plan of the High Fructose Syrup plant from menir could be continued into the planning stage.


2019 ◽  
Author(s):  
Ayu Dwi Utami

Abstract Sweet potato is an annual (short-lived) plant and is classified into a type of sweet potato plant. After one production, this plant will die. Sweet potato as a carbohydrate-producing agricultural commodity has no doubt existed among the people. Even sweet potatoes are used as food reserves if the production of rice and corn is not sufficient. Sweet potatoes can meet the nutritional needs of the body's health due to its complete nutritional content. So that sweet potatoes can be used as raw material innovations for making dumplings. Besides this innovation also aims that these dumplings also have their own uniqueness. Onde-onde is a traditional food made from wheat flour or glutinous rice flour that is fried or boiled and the surface is sprinkled with rice. This traditional food came from Mojokerto, East Java, so Mojokerto was dubbed the "onde-onde city".


TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.


Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  


2017 ◽  
Vol 31 (2) ◽  
pp. 82-89
Author(s):  
E. S. Epifanov

This article presents a classification of major factors that shape the cost of Internet site. Also discusses the limitations in determining the objectives of the web site; advantages and disadvantages of different factors.


2020 ◽  
Vol 265 ◽  
pp. 109691 ◽  
Author(s):  
T. Anukiruthika ◽  
J.A. Moses ◽  
C. Anandharamakrishnan
Keyword(s):  
Egg Yolk ◽  

Sign in / Sign up

Export Citation Format

Share Document