Microencapsulation of steroidal saponins from agave sap concentrate using different carriers in spray drying

2021 ◽  
pp. 108201322110499
Author(s):  
Benjamín Vázquez-Rodríguez ◽  
Janet A. Gutiérrez-Uribe ◽  
Daniel Guajardo-Flores ◽  
Liliana Santos-Zea
Keyword(s):  
Xanthan Gum ◽  
Guar Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Spherical Shape ◽  
Product Yield ◽  
Inlet Temperature ◽  
Steroidal Saponins ◽  
Tap Density

Concentrated agave sap is a product with in vivo proven hypocholesterolemic and hypoglycemic activities, as well as in vitro anticancer potential. In the present work, a factorial design was used to determine the suitable drying conditions of concentrated agave by studying the effect of inlet temperature (150 °C, 180 °C and 210 °C) and the type of carrier agent (maltodextrin, hydroxypropyl methylcellulose, guar gum and xanthan gum). The response variables for each treatment were the product recovery and microencapsulated saponins. Further characterization of concentrated agave powders was performed: solubility in water, hygroscopicity, moisture content, tap density, bulk density, Carr’s index followability and morphology by scanning electron microscopy analysis. The hydroxypropyl methylcellulose proved to improve physicochemical properties and enhance product yield, using 210 °C inlet temperature and a mix of carrier agents of maltodextrin/hydroxypropyl methylcellulose/xanthan gum at 50/48.5/1.5 (w/w/w) proportion exhibited the highest saponin recovery of 53.81%. Moreover, different carrier agents in powders revealed two shapes, regular spherical shape with smooth surface and collapsed shapes. The use of polymers excipients helped to decrease the stickiness of the desired product and enhanced the powder stability and microencapsulation of the steroidal saponins.

scholarly journals Pharmacological comparison of four biopolymeric natural gums as hemostatic agents for management of bleeding wounds: preliminary in vitro and in vivo results

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Himanshu Kushwah ◽  
Nidhi Sandal ◽  
Meenakshi Chauhan ◽  
Gaurav Mittal
Keyword(s):  
Xanthan Gum ◽  
Guar Gum ◽  
Human Lymphocytes ◽  
Sprague Dawley ◽  
Gum Tragacanth ◽  
Civilian Trauma ◽  
Sprague Dawley Rats ◽  
Cytotoxicity Studies

Abstract Background Uncontrolled bleeding is one of the primary reasons for preventable death in both civilian trauma and military battle field. This study evaluates in vitro and in vivo hemostatic potential of four biopolymeric natural gums, namely, gum tragacanth, guar gum, xanthan gum, and gum acacia. In vitro evaluation of whole blood clotting time and erythrocyte agglutination assay were carried out. In vitro cytotoxicity studies with respect to each gum were done in human lymphocytes to ascertain percent cell viability. In vivo hemostatic potential of each gum (as sponge dressing and powder form) was evaluated in Sprague Dawley rats using tail bleeding assay and compared with commercially available hemostatic sponge. Other important parameters like (a) time taken for complete hemostasis, (b) amount of blood absorbed, (c) adherence strength of developed hemostatic dressing(s), (d) incidence of re-bleeding, and (e) survival of animals were also studied. Results Of the four test gums studied, xanthan gum (@3mg/ml of blood) and gum tragacanth (@35mg/ml of blood) were able to clot blood in least time (58.75±6.408 s and 59.00±2.082 s, respectively) and exhibited very good hemostatic potential in vitro. Except for xanthan gum, all other test gums did not exhibit any significant cytotoxicity at different time points till 24 h. In rat tail bleeding experiments, gum tragacanth sponge dressing and powder achieved hemostasis in least time (156.2±12.86 s and 76±12.55 s, respectively) and much earlier than commercially available product (333.3±38.84 s; p˂0.01). Conclusion Results indicate potential of gum tragacanth to be developed into a suitable hemostatic product.

SUSTAINED RELEASE HYDROPHILIC MATRICES BASED ON XANTHAN GUM AND HYDROXYPROPYL METHYLCELLULOSE: DEVELOPMENT, OPTIMIZATION, IN VITRO AND IN VIVO EVALUATION

2010 ◽  
Vol 2 ◽  
pp. 89-103
Author(s):  
Muhammad Sajid Hamid Akash . ◽  
Ikram Ullah Khan . ◽  
Syed Nisar Hussain Shah . ◽  
Sajid Asghar . ◽  
Asif massud . ◽  
...  
Keyword(s):  
Sustained Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
In Vivo Evaluation ◽  
Hydrophilic Matrices

scholarly journals Newly Developed Topical Cefotaxime Sodium Hydrogels: Antibacterial Activity andIn VivoEvaluation

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Azza S. Zakaria ◽  
Samar A. Afifi ◽  
Kadria A. Elkhodairy
Keyword(s):  
Antibacterial Activity ◽  
Guar Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Inhibition Zone ◽  
Antibacterial Activities ◽  
Stability Study ◽  
Drug Content ◽  
Noticeable Reduction

In an attempt to reach better treatment of skin infections, gel formulations containing Cefotaxime (CTX) were prepared. The gel was formulated using Carbopol 934 (C934), Hydroxypropyl Methylcellulose 4000 (HPMC 4000), Carboxymethylcellulose Sodium (Na CMC), Pectin (PEC), Xanthan Gum (XG), or Guar Gum (GG). Thirteen different formulas were prepared and characterized physically in terms of color, syneresis, spreadability, pH, drug content, and rheological properties. Drug-excipients compatibility studies were confirmed by FTIR and thenin vitrodrug release study was conducted.In vitroandin vivoantibacterial activities of CTX were studied against wound pathogens such as,Staphylococcus aureus(S. aureus),Escherichia coli(E. coli), andPseudomonas aeruginosa(P. aeruginosa), using either pure drug or Fucidin® cream as control. F13 provides better spreadability compared to F1 (XG) or F11 (HPMC). Moreover, the release of the drug from hydrogel F13 containing C934 was slower and sustained for 8 h. Stability study revealed that, upon storage, there were no significant changes in pH, drug content, and viscosity of the gels. Also, F13 showed the larger inhibition zone and highest antibacterial activity among other formulations. Histological analysis demonstrated that after single treatment with F13 gel formulation, a noticeable reduction in microbial bioburden occurred in case of both Gram positive and Gram negative bacterial isolates.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

In-vitro and In-vivo Pharmacokinetic Evaluation of Guar Gum-Eudragit® S100 Based Colon-targeted Spheroids of Sulfasalazine Co-administered with Probiotics

2018 ◽  
Vol 15 (3) ◽  
pp. 367-387 ◽  
Author(s):  
Abhinav Sharma ◽  
Bimlesh Kumar ◽  
Sachin Kumar Singh ◽  
Monica Gulati ◽  
Yogyata Vaidya ◽  
...  
Keyword(s):  
Guar Gum ◽  
Pharmacokinetic Evaluation

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

Application of self-healing, swellable and biodegradable polymers for wound treatment

2021 ◽  
Vol 30 (Sup9a) ◽  
pp. IVi-IVx
Author(s):  
Chukwuma O Agubata ◽  
Mary A Mbah ◽  
Paul A Akpa ◽  
Godwin Ugwu
Keyword(s):  
Wound Healing ◽  
Polyvinyl Alcohol ◽  
Biodegradable Polymers ◽  
Hydroxypropyl Methylcellulose ◽  
Composite Films ◽  
Self Healing ◽  
Moisture Uptake ◽  
Folding Endurance

Aim: Self-healing, swellable and biodegradable polymers are vital materials that may facilitate the different stages of wound healing. The aim of this research was to prepare wound healing films using self-healing polyvinyl alcohol (PVA), swellable hydroxypropyl methylcellulose (HPMC), biodegradable polyglycolic acid (PGA) sutures and ciprofloxacin antibiotic for improved treatment outcome. Methods: Films were formulated through aqueous-based mixing of varying amounts of polyvinyl alcohol (10–20% weight/weight (w/w)) and hydroxypropyl methylcellulose (0.5, 1% w/w) with fixed quantities of ciprofloxacin. PGA sutures were placed as grids within the wet mixtures of the polymers and ciprofloxacin, and thereafter products were air dried. The formulated films were evaluated for swelling ratio, breaking elongation, folding endurance, moisture uptake and loss, compatibility and in vitro antibiotic release. Furthermore, in vivo wound healing was studied using excision model and histopathological examinations. Results: Swelling ratios were above 1.0 and the films were minimally stretchable, with folding endurance greater than 500. Films were stable while moisture uptake and loss were observed to be less than 30%. Among the optimised hydrogel batches, those containing 10% w/w PVA and 1% w/w HPMC with no PGA showed the highest drug release of 73%, whereas the batches with higher PGA content showed higher percentage wound size reduction with minimal scar. The completeness of wound healing with batches containing PVA, HPMC, ciprofloxacin and PGA, along with the standard, is evident considering the massive cornification, regeneration of the epithelial front and stratum spinosum. Conclusion: The findings show that polymer-based multifunctional composite films are suitable for use as dressings for improved wound healing.

scholarly journals IN SITU GEL AS PLATFORM FOR KETOCONAZOLE SLOW RELEASE DOSAGE FORM

2018 ◽  
Vol 10 (5) ◽  
pp. 76
Author(s):  
Methaq Hamad Sabar ◽  
Iman Sabah Jaafar ◽  
Masar Basim Mohsin Mohamed
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
High Viscosity ◽  
In Situ Gel ◽  
Alginate Concentration

Objective: The aim of this study was to formulate ketoconazole (keto) as oral floating in situ gel to slow the release of keto in the stomach.Methods: Sodium alginate (Na alginate) was used as a primary polymer in the preparation of the in situ gel and was supported by the following polymers: guar gum (GG), hydroxypropyl methylcellulose (HPMC) K4M, K15M and carbapol 940 as viscosity enhancing agents. As a consequence, and to complete the gelation process of above formulations was by adding the calcium carbonate (CaCO3). The in situ gels were investigated by the following tests: floating lag time, floating duration, viscosity, drug content, in vitro gelling studies and in vitro release study.Results: The study showed that the faster release was obtained with F1 which contained Na alginate alone. Additionally, reduction in Na alginate concentration resulted in significant increase in drug release. It was also noted that the increase in GG (viscosity enhancing polymer) concentration resulted in non-significant decrease in percent drug release and the reduction in CaCO3 concentration led to significant increase in drug release. Moreover, the release of drug was also affected by grade of viscosity enhancing polymer, the faster release was observed with the formula which contained a polymer of low viscosity (HPMC K4M) and an opposite result was with the high viscosity polymer (HPMCK15M).Conclusion: This study showed the formulation of Na alginate with GG and CaCO3, led to gain floating in situ gel and a sustained release of keto. 

scholarly journals FORMULATION AND EVALUATION OF PROCHLORPERAZINE MALEATE SUSTAINED RELEASE FLOATING TABLET

2017 ◽  
Vol 9 (2) ◽  
pp. 89 ◽  
Author(s):  
Ahmed Abdulameer Albadry ◽  
Wedad K. Ali ◽  
Fouad A. Al-saady
Keyword(s):  
Chemical Interaction ◽  
Hydroxypropyl Methylcellulose ◽  
Angle Of Repose ◽  
Weight Variation ◽  
Compressibility Index ◽  
Floating Drug Delivery ◽  
Tap Density ◽  
Floating Tablet ◽  
Optimum Formula

<p><strong>Objective: </strong>The objective of this study was to formulate once daily sustained oral release floating tablet of prochlorperazine maleate, this floating tablet has many advantages like reduction in dosing frequency, increase bioavailability, enhance patient compliance, and improve drug solubility.</p><p><strong>Methods: </strong>The prochlorperazine maleate floating tablets were formulated by using hydrophilic swellable polymer and gas generating agent. In this study, 15 formulas were prepared with many variables in order to achieve an optimum dissolution and floating behaviour for the floating tablet. The all prepared formulas were tested for bulk density, tap density, angle of repose, Carr's Index, thickness, weight variation, hardness, friability, drug content, <em>in vitro</em> dissolution test, <em>in vitro </em>buoyancy, and swelling index.</p><p class="Default"><strong>Results: </strong>Formula (F2) that contain 55% (w/w) <a href="https://www.google.iq/url?sa=t&amp;rct=j&amp;q=&amp;esrc=s&amp;source=web&amp;cd=3&amp;ved=0ahUKEwjh383ow9LPAhWF6RQKHRChCVgQFggpMAI&amp;url=https%3A%2F%2Fwww.ulprospector.com%2Fen%2Fna%2FFood%2FDetail%2F895%2F563462%2FBenecel-Hydroxypropylmethylcellulose-HPMC-K4M&amp;usg=AFQjCNGgfyJECkumK5cpU_6luVwwJ2fKxA&amp;bvm=bv.135258522,d.d24">hydroxypropyl methylcellulose</a> k4M (HPMCK4M), 5 % (w/w) sodium bicarbonate (NaHCO<sub>3</sub>) have acceptable flow properties and compressibility index and good physical properties with floating lag time (16±0.57) seconds and total floating time (32±0.29) h with 100% release of prochlorperazine maleate at the end of 24 h. Fourier transform infrared spectroscopy (FTIR) study of optimum formula (F2) showed no chemical interaction between the drug and the excipients that used in the formula.<strong></strong></p><p><strong>Conclusion: </strong>It can be concluded that that the selected formula (F2) can be a promising formula for the preparation of gastro retentive floating drug delivery systems of prochlorperazine maleate.</p>

Sign in / Sign up

Export Citation Format

Share Document