Comparison of Bio and Eco-technologies with Chemical Methods for Pre-treatment of Flax Fibers: Impact on Fiber Properties

2014 ◽  
Vol 9 (4) ◽  
pp. 155892501400900 ◽  
Author(s):  
Sabela Camano ◽  
Nemeshwaree Behary ◽  
Philippe Vroman ◽  
Christine Campagne
Keyword(s):  
Water Absorption ◽  
Fiber Bundle ◽  
Glass Fibers ◽  
Fiber Surface ◽  
Pectate Lyase ◽  
High Water ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Flax Fibers ◽  
The Impact

Flax fibers, available as fiber bundles, are commonly used as fiber reinforcement in composite materials as a substitute for glass fibers. Pre-treatments are often necessary for improving fiber-resin adhesion, and also to facilitate fiber elementarization, and to improve fiber ability to be implemented in mechanical processes limiting fiber damages. This paper focuses on the impact of biotechnologies (effect of 2 different enzymes: a pectate lyase and a laccase) and of an ecotechnology (ultrasound with ethanol), compared to classical chemical pre-treatments (using aqueous NaOH and ammonia) on the final flax fiber bundle properties, before and after a carding process. Fiber surface properties (wettability and/or zeta potential values), fiber elementarization and mechanical properties vary with the type of treatment (chemical nature of product and conditions used). Fibers elementarised using pectate lyase and ultrasound/ethanol have a hydrophilic surface and a high water absorption capacity, and are also of highest quality in terms of increased fineness. Treatment with NaOH yields the poorest fiber bundle tenacity. Laccase enzyme yields long thick hydrophobic fibers having very low water absorption capacity, and the most neutral surface charge. Properties of flax fibers can be easily monitored using different pre-treatments resulting in fibers which would be suited for various final applications.

scholarly journals Cellulose Nanofibrils/Xyloglucan Bio-Based Aerogels with Shape Recovery

Gels ◽  
2021 ◽  
Vol 7 (1) ◽  
pp. 5
Author(s):  
Samuel Mandin ◽  
Samuel Moreau ◽  
Malika Talantikite ◽  
Bruno Novalès ◽  
Jean-Eudes Maigret ◽  
...  
Keyword(s):  
Water Absorption ◽  
Shape Recovery ◽  
Cellulose Nanofibrils ◽  
High Water ◽  
Absorption Capacity ◽  
Absorption Properties ◽  
High Affinity ◽  
High Water Absorption ◽  
Freezing Procedure ◽  
The Impact

Bio-based aerogels containing cellulose nanofibrils (CNFs) are promising materials due to the inherent physical properties of CNF. The high affinity of cellulose to plant hemicelluloses (xyloglucan, xylan, pectin) is also an opportunity to develop biomaterials with new properties. Here, we prepared aerogels from gelled dispersions of CNFs and xyloglucan (XG) at different ratios by using a freeze-casting procedure in unidirectional (UD) and non-directional (ND) manners. As showed by rheology analysis, CNF and CNF/XG dispersions behave as true gels. We investigated the impact of the freezing procedure and the gel’s composition on the microstructure and the water absorption properties. The introduction of XG greatly affects the microstructure of the aerogel from lamellar to cellular morphology. Bio-based aerogels showed high water absorption capacity with shape recovery after compression. The relation between morphology and aerogel compositions is discussed.

scholarly journals OPTIMUM PERFORMANCE OF STABILIZED EDE LATERITE AS AN ALTERNATIVE CONSTRUCTION MATERIAL

2020 ◽  
Vol 3 (8) ◽  
pp. 1-8
Author(s):  
Adegbenle Bukunmi O
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Construction Material ◽  
High Water ◽  
Good Alternative ◽  
Linear Shrinkage ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Optimum Performance ◽  
High Water Absorption

Laterite samples from Ede area with particle components of 19.7% clay, 32.8% silt and 47.5% sand was stabilized with combined cement, lime and bitumen and test for Compressive strength, Linear Shrinkage, Permeability and Water Absorption. The stabilizers were mixed with laterite soil in different ratios and percentage. The laterite carried 90% which is constant while the three stabilizers shared the remaining 10% in varying form. After 28 days of curing, laterite stabilizer with 90% of laterite, 8% of cement, 1% lime and 1% bitumen (LCLB1) possessed compressive strength of 2.01N/mm2. It Water Absorption Capacity was 3.05%. LCLB4 stabilizer (90% laterite, 6% cement, 2% lime and 2% bitumen) has the same compressive strength with LCLB1 stabilizer but with a high Water Absorption Capacity of 4.2%. The stabilizer of 90% laterite, 3.33% cement, 3.33% lime and 3.33% of bitumen (LCLB8) has the lowest compressive strength of 0.74N/mm2 and the highest Water Absorption Capacity of 5.39%. The results shows that LCLB1 stabilizer is a better stabilizer for strength and blocks made from laterite stabilized with it stand a good alternative to sand Crete blocks in building constructions. The combination of these stabilizers in order to determine a most economical volume combination for optimum performance is highly possible and economical.

Villus-like nanocomposite hydrogels with a super-high water absorption capacity

2020 ◽  
Vol 8 (25) ◽  
pp. 12613-12622
Author(s):  
Xiaosai Hu ◽  
Qiao Wang ◽  
Qing Liu ◽  
Zongjin Li ◽  
Guoxing Sun
Keyword(s):  
Water Absorption ◽  
High Water ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Nanocomposite Hydrogels ◽  
High Water Absorption

Villi-like structure greatly improved the water absorption capability of super water absorbing hydrogels (SAH).

Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes

2022 ◽  
Author(s):  
Youssef El Moussi ◽  
Laurent Clerc ◽  
Jean-Charles Benezet
Keyword(s):  
Thermal Conductivity ◽  
Particle Size ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Water Absorption ◽  
Rice Straw ◽  
Absorption Capacity ◽  
Mechanical And Thermal Properties ◽  
Water Absorption Capacity ◽  
The Impact

The use of bio-based concretes performed with lignocellulosic aggregates constitute an interesting solution for reducing the energy consumption, greenhouse gas emissions and CO2 generated by the building sector. Indeed, bio-based materials could be used as an alternative of traditional materials such as expended polystyrene and mineral resources (e.g. glass and rock wools) for insulation. Furthermore, these bio-based concretes are known for their interesting insulation properties, indeed they allow to enhance thermal properties of buildings and enables moisture management which lead to design efficient building materials. For this purpose, bio-based concrete using rice straw as aggregate are studied in this present work. The impact of the characteristics of rice straw particle (particle size distribution, bulk density, and water absorption capacity, etc.) on both the mechanical and thermal properties of the bio-based concrete are investigated. Five formulations of rice straw concrete are examined, compared and then classified in terms of insulation properties and mechanical properties. The assessments are based on the measurement of density and thermal conductivity. The variation of compressive strength in function of the characteristics (mean particle length) of rice straw particle are assessed and discussed. The investigation covers also the porosity and density. Tests are also carried out on agricultural by-products with a view to highlight their chemical, physical and structural proprieties. The results show that the use of large particles with low water absorption capacity induce lighter concretes with the density between 339 and 505 kg/m3 and lead to a high compressive strength with a high mechanical deformability. Furthermore, it appears that an increase in the average length of rice straw particle lead to decrease of thermal conductivity of bio-based concretes. It varies from 0.062 to 0.085 W/(m.K).

GENOTYPE RECOGNITION IN PEAS BY WATER IMBIBITION OF SEEDS

1966 ◽  
Vol 46 (5) ◽  
pp. 545-551 ◽  
Author(s):  
H. H. Marshall
Keyword(s):  
Water Absorption ◽  
Seed Weight ◽  
Sugar Content ◽  
High Water ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Water Imbibition ◽  
High Water Absorption ◽  
Immature Seeds ◽  
Pea Seeds

Significant differences in the water absorption capacity of mature pea seeds were found between lines or varieties within and between each of four genetically different seed types, round, wrinkled, "new" wrinkled, and "double" wrinkled. The differences in water absorption were positively correlated with sugar content of immature peas. They were also negatively correlated with seed weight in lines with the genes for new wrinkled.Peas with both classical (rr) and the genes for new wrinkled have high water absorption indices and small seeds. Immature seeds contain from 14.6 to 17.0% sugar or about 1% more than classical wrinkled varieties.

Estimation of Water Absorption Capacity of Hardened Concrete with Recycled Aggregate Based on Experimental Determination

2015 ◽  
Vol 732 ◽  
pp. 411-414 ◽  
Author(s):  
Tereza Pavlů ◽  
Magdaléna Šefflová
Keyword(s):  
Water Absorption ◽  
Negative Impact ◽  
High Water ◽  
Absorption Capacity ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Hardened Concrete ◽  
Water Absorption Capacity ◽  
Demolition Waste

Recycled construction and demolition waste, especially recycled concrete, is able to use as an aggregate for concrete. The high water absorption capacity (WA) of recycled aggregate has a negative impact of concrete mix workability and influences the water-cement ratio. This paper presents results of experimental measurement of WA of recycled aggregate and recycled concrete. Series of concrete samples with various replacement ratios of natural aggregate and recycled aggregate were prepared for this study. The main aim of this study is to analyze the influence of recycled aggregate WA, and mixture ratios on the WA of hardened concrete (HC). Regression model to estimate the WA of hardened concrete is presented.

The effect of sugar beet fiber addition on the chemical properties of tortilla chips

2012 ◽  
pp. 385-388 ◽  
Author(s):  
Azadeh Saadatmandi ◽  
Mohammad Elahi ◽  
Reza Farhoosh ◽  
Mahdi Karimi
Keyword(s):  
Sugar Beet ◽  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Overall Acceptability ◽  
Tortilla Chips

The incorporation of sugar beet fiber (0–5%) to tortilla chips and the effects on the chemical and sensory properties were studied. Addition of sugar beet fiber (SBF) led to an increasing of water absorption capacity, ash content and darkness while lowering the protein content and oil absorption. Sensory evaluation showed that the overall acceptability of tortilla chips reduces if adding more than 2% SBF.

scholarly journals Water Absorption Capacity Determines the Functionality of Vital Gluten Related to Specific Bread Volume

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 228
Author(s):  
Marina Schopf ◽  
Katharina Anne Scherf
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Wheat Flour ◽  
Specific Volume ◽  
Disulfide Bonds ◽  
Protein Composition ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Water Addition ◽  
Wheat Flours

Vital gluten is often used in baking to supplement weak wheat flours and improve their baking quality. Even with the same recipe, variable final bread volumes are common, because the functionality differs between vital gluten samples also from the same manufacturer. To understand why, the protein composition of ten vital gluten samples was investigated as well as their performance in a microbaking test depending on the water content in the dough. The gluten content and composition as well the content of free thiols and disulfide bonds of the samples were similar and not related to the specific bread volumes obtained using two dough systems, one based on a baking mixture and one based on a weak wheat flour. Variations of water addition showed that an optimal specific volume of 1.74–2.38 mL/g (baking mixture) and 4.25–5.49 mL/g (weak wheat flour) was reached for each vital gluten sample depending on its specific water absorption capacity.

Sign in / Sign up

Export Citation Format

Share Document