The effect of sugar beet fiber addition on the chemical properties of tortilla chips

2012 ◽  
pp. 385-388 ◽  
Author(s):  
Azadeh Saadatmandi ◽  
Mohammad Elahi ◽  
Reza Farhoosh ◽  
Mahdi Karimi
Keyword(s):  
Sugar Beet ◽  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Overall Acceptability ◽  
Tortilla Chips

The incorporation of sugar beet fiber (0–5%) to tortilla chips and the effects on the chemical and sensory properties were studied. Addition of sugar beet fiber (SBF) led to an increasing of water absorption capacity, ash content and darkness while lowering the protein content and oil absorption. Sensory evaluation showed that the overall acceptability of tortilla chips reduces if adding more than 2% SBF.

scholarly journals STUDI SIFAT FUNGSIONAL DAN KIMIA TEPUNG KECAMBAH KACANG KORO BENGUK (Mucuna pruriens L.)

2019 ◽  
Vol 8 (2) ◽  
pp. 131
Author(s):  
Vivian Citra Liadi ◽  
Ni Wayan Wisaniyasa ◽  
Ni Nyoman Puspawati
Keyword(s):  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Fat Content ◽  
Ash Content ◽  
Carbohydrate Content ◽  
Oil Absorption ◽  
Bean Sprout ◽  
Swelling Volume ◽  
And Chemical Properties

The purpose of this study was to determine the functional and chemical properties of mucuna bean sprout flour. This study was conducted using 48 hour germination and without germination of mucuna bean, and each treatment was repeated three times. Mucuna bean flour and mucuna bean sprouts flour were tested for rendemen, functional properties (water absorption, oil absorption, swelling volume, and solubility), and chemical properties (moisture content, ash content, protein content, fat content, carbohydrate content, and HCN content). The results showed that germination of mucuna bean had a very significant effect on rendemen, water absorption, oil absorption, ash content, moisture content, a significant effect on fat content, carbohydrate content, and had no significant effect on swelling volume, solubility, protein content, and HCN content. The results showed that rendemen of mucuna bean sprout flour was 63.93% (db), the functional properties of mucuna bean sprout flour were water absorption 1.67 ml H2O/g solid, oil absorption 2.17 ml oil/g solid, swelling volume 8.68 ml/g, and solubility 25.76%, while the chemical properties of mucuna bean sprout flour were water content 8.10%, ash content 2.87%, protein content 36.33%, fat content 10.77%, carbohydrate content 41.92%, and HCN content 5.39 mg/kg.

scholarly journals Influence of Biofertilizers on Protein, Moisture and Ash Content in Relation to Swelling Property, Water Absorption Capacity, Mineral Elements, Total Phenolic Level of Stevia (Stevia rebaudiana Bert.) Plant Grown under Acidic Soil Zone of South India

2013 ◽  
Vol 6 ◽  
pp. 78-97
Author(s):  
Kuntal Das ◽  
Raman Dang
Keyword(s):  
Water Absorption ◽  
Protein Content ◽  
Acid Soil ◽  
Stevia Rebaudiana ◽  
Absorption Capacity ◽  
Ash Content ◽  
Total Phenolic ◽  
Water Absorption Capacity ◽  
Swelling Property ◽  
Soil Zone

The field experiment on Stevia rebaudiana (SR), (Family: Asteraceae) was carried out in acid soil zone of Shimoga (Karnataka) in the year 2009 and 2010 to investigate the influence of biofertilizers on protein, moisture and ash content in the dried Stevia leaf and their correlation with swelling property, water absorption capacity and mineral element contents. Results revealed that second harvested sample (August) in first year (2009) was better for all aspects than other harvested samples and the results showed significant increase in protein content (16.22%), swelling index (SI) (5.10% w/w), water absorption capacity (WAC) (4.91 ml/g) with the treatment T8 where three bio fertilizers were applied togetherly with simultaneous moisture content varied from 6.61 to 7.18%. The significant higher correlations were observed (significant at 1%) between protein content with SI (r = 0.99), WAC (r = 0.99) and SI with WAC (r = 0.98) in 2009 harvested samples. The ash content was higher in third harvested sample (13.54%) in the year 2009 with simultaneous increased amount of Fe (6.19 mg/kg), Mn (1.24 mg/kg), Cu (0.72 mg/kg) and Zn (1.22 mg/kg) contents due to the residual effect of bio fertilizers. Nitrogen (0.74 mg/kg), P (0.40 mg/kg) and K (0.68 mg/kg) contents were higher during second harvested samples and thereafter decreased. Total phenolic content was also recorded highest (64.52 mg/g) with three bio fertilizers applied togetherly during year 2009 compared to the year 2010 (50.12 mg/g). The results suggest that the application of bio-fertilizers either single or more numbers in a balanced way may be beneficial in improving protein, phenol and mineral contents of stevia plant

scholarly journals Pengaruh Lama Perkecambahan terhadap Karakteristik Fisik, Kimia dan Fungsional Tepung Kecambah Jagung Pulut (Zea mays ceratina L.)

2021 ◽  
Vol 10 (2) ◽  
pp. 304
Author(s):  
Gery Hartawan ◽  
Ni Wayan Wisaniyasa ◽  
Anak Agung Istri Sri Wiadnyani
Keyword(s):  
Water Absorption ◽  
Protein Content ◽  
Bulk Density ◽  
Fat Content ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Corn Flour ◽  
Swelling Power ◽  
Waxy Corn

This study aims to know the effect of time on the germinated waxy corn flour characteristics and to know which time that can produce a germinated waxy corn flour with the best characteristics. This research used a Complete Randomized Design with a different germination time as the treatment, which is 0 hour, 24 hour, 36 hour and 48 hour. The experimentation was repeated 4 times resulting 16 experimental units. The data obtained were analyzed using an analysis of variance and if the treatment had a significant effect, it was followed by a Duncan Multiple Range Test (DMRT). The results showed that the effect of time had a very significant effect on total rendement, L’ value (brightness), b’ value (green-yellow), protein content, water absorption capacity, swelling power, solubility of germinated waxy corn flour. This research also resulting a significant effect on moisture content and carbohydrate content, but resulting a non-significant effect on bulk density, a’ value (blue-red), ash content, fat content, crude fiber content and oil absorption capacity. The best characteristic of the flour in this study was the waxy corn flour that has been germinated for 48 hours with 79.44% rendement, 0.50 g/ml bulk density, L’:54.34, a’: 6.90, b’: 22,89 color, 7.15% water content, 1.56% ash content, 6.36% fat content, 9.66% protein content, 82.31% carbohydrates content, 2.39% fiber content, 1.55 ml/g water absorption, 1.81 ml/g oil absorption, 6.70 g/g swelling power, and 51.72% solubility.

scholarly journals Comparative nutritional and functional properties of selected underutilized legumes

2020 ◽  
Vol 45 (3) ◽  
Author(s):  
K. O. Soetan ◽  
A. A. Adeola
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Phaseolus Lunatus ◽  
International Institute ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Crude Fibre ◽  
Emulsion Capacity

Underutilized and neglected legumes have numerous nutritional potentials with great contributions to food security but they are usually excluded from research and development agenda. This study evaluates the nutritional and functional properties of six different underutilized and neglected legumes; Lima bean (LB) (Phaseolus lunatus) (2006-009), Bambara groundnut (BG) (Vigna subterranea) (TVSU- 1482), winged bean (WB) (Psophocarpus tetragonolobus) (Tpt-48), jack bean (JB) (Canavalia ensiformis) (Tce-4), sword bean (SB) (Canavalia gladiata) (Tcg-4) and African yam bean (AYB) (Sphenostylis stenocarpa) (TSS-95) from the Genetic Resources Unit (GRU), International Institute of Tropical Agriculture (IITA), Ibadan, Oyo State, Nigeria. Nutritional and functional properties were evaluated using proximate composition, mineral analyses and functional properties like bulk density, water absorption capacity, oil absorption capacity, emulsion capacity and dispersibility. All the procedures were carried out using standard protocols. Statistical analysis was done using descriptive statistics. Results of proximate analysis showed that crude protein ranged from18.88 0.15%(WB) to 26.60±0.14%(AYB), crude fat ranged from 1.84 0.02% (JB) to 6.39 0.03% (BG), crude fibre ranged from 3.70 ±0.00% (AYB) to 5.04 0.03% (SB), ash ranged from 3.10 ± 0.14% (AYB) to 4.66 0.02% (LB), nitrogen free extract ranged from 55.60 0.04% (SB) to 62.97 0.12% (WB), moisture content ranged from 5.75 0.48% (AYB) to 10.77 0.03% (JB), dry matter ranged from 89.23 0.03% (JB) to 94.25 ± 0.488% (AYB) and gross energy ranged from 4.39 0.003 kcal/g (SB) to 4.66 0.00 (BG). Mineral content results revealed that calcium varied from 0.14 0.000% (LB) to 0.23 0.0003% (AYB), phosphorus varied from 0.20 0.0001% (AYB) to 0.38 0.00% (BG), sodium varied from 0.12 0.00% (LB and WB) to 0.35 0.0006% (AYB), potassium varied from 0.69 0.00% (LB) to 1.12 0.00% (BG), magnesium varied from 0.15 0.0002% (AYB) to 0.27 0.000% (BG) and iron varied from 44.84 0.03 (mg/g) (WB) to 80.98 0.0007(mg/g) (AYB). Results of functional properties showed that bulk density ranged from 0.45±0.04 g/mL (WB) to 0.77±0.08 g/mL (SB), water absorption capacity ranged from 168.33±0.03 g/100g (LB) to 183.62±0.01 g/100g (SB), oil absorption capacity ranged from 146.54 ±0.02 g/100g (LB) to 161.55±0.02 g/100g (JB), emulsion capacity ranged from 79.67 ±0.02 g/100g (LB) to 89.46±0.02 g/100g (SB) and dispersibility ranged from81.0±1.41%(SB) to 86.5±0.71% (BG). The study concluded that all the underutilized legumes have varying nutritional and functional properties, which should be exploited for nutritional benefits and industrial applications, as a solution to the problem of food shortage, especially in the developing countries.

scholarly journals Study the Physical and Functional Properties of Chickpea and Black Gram Flours

2021 ◽  
Vol 10 (10) ◽  
pp. 277-282
Author(s):  
Nikhil D. Solanke Pradeep P. Thorat ◽  
Jayashri Ughade
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Water Solubility ◽  
Absorption Capacity ◽  
Absorption Index ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Black Gram ◽  
Chickpea Flour

The purpose of this study is to determine the quality of chickpea and black gram flour used in preparation of traditional products. As the study of physical properties of flour, both chickpea as well as black gram flour shows higher in bulk density. Water absorption index show lower level of both chickpea as well as black gram flour and water solubility index shows both chickpea as well as black gram flour in between bulk density and water absorption index. While the functional properties of flour, water absorption capacity lower for chickpea flour but higher oil absorption capacity. Higher the water absorption capacity for black gram flour and lower the oil absorption capacity for black gram. This concluded that bulk density for both chickpea flour and black gram is highest while oil absorption capacity is lower in both chickpea flour and black gram flours.

scholarly journals Effect of Potassium Carbonate (K2CO3) on the Viscosity and Related Physico – Chemical Properties of Genger (Bombax costatum) Powder during Storage

2013 ◽  
Vol 1 (1) ◽  
pp. 77-82 ◽  
Author(s):  
D Gernah ◽  
P Gbakaan
Keyword(s):  
Water Absorption ◽  
Potassium Carbonate ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Gel Strength ◽  
Water Absorption Capacity ◽  
Fresh Sample ◽  
Plastic Container ◽  
Physico Chemical ◽  
Gelation Concentration

Effect of storage and concentration of potassium carbonate (K2CO3) on the viscosity and related physico – chemical properties of genger (Bombax costatum) powder was determined. Genger powder was stored for a period of four (4) months (May-August) at 30oc ± 5oc under varying concentrations of K2CO3: 0%, 5%, 10% and 15% in two containers (plastic, giving samples A – D and metal tins, giving samples A1 – D1). Thereafter, the moisture and crude fat contents, water absorption capacity, least gelation concentration, effect of K2CO3 concentration on gel strength and viscosity of the stored powders were determined, using standard methods of analysis, with fresh powder (analyzed before storage) as control. Moisture content decreased significantly (p < 0.05) from 8.37% to 3.04% and 2.00% in samples D and D1 respectively, while crude fat content increased significantly (p < 0.05) from 2.50% to 7.50% and 10.05% in the same samples. Water absorption capacity also increased significantly (p < 0.05) from 6.4g/g to 6.40g/g in the fresh sample to 7.30g/g and 8.30g/g in samples D and D1 respectively. Gelation capacity increased considerably, with 15% K2CO3 giving very strong gels at 1.50% concentration. The overall viscosity increased significantly (p < 0.05) with increase in concentration of (K2CO3) from 64.00FN to 110.00FN after storage. Generally, samples stored in metal tin gave better results than those in the plastic container.

scholarly journals The potential source for composite flours as food ingredient from local grown crops

Food Research ◽  
2020 ◽  
Vol 4 (S2) ◽  
pp. 24-30
Author(s):  
N. Zainol ◽  
S. Subramanian ◽  
A.S. Adnan ◽  
N.H. Zulkifli ◽  
A.A.M. Zain ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Physicochemical Properties ◽  
Water Absorption ◽  
Foam Stability ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Composite Flours ◽  
Tapioca Flour

The market of composite flour is growing as consumer nowadays choosing a healthy diet as personal preference. The suitability of the composite flour for use as intermediate or finish food ingredients highly depends on its physicochemical properties and its nutritional value. In this study, four types of local fruit crops (particularly their seeds) namely rambutan, cempedak, durian and nangka were dried and ground into powder form. The physicochemical properties such as bulk density, pH, water absorption capacity (WAC), oil absorption capacity (OAC), foam stability (FS), foam capacity (FC) as well as gelatinization properties of these composite flour were studied. Mineral content and heavy metal analytes were also determined. Results for bulk density from the least to the higher amount was 0.54±0.00 g/mL, 0.57±0.00 g/mL, 0.58±0.01 g/mL, 0.66±0.00 g/mL , 0.70±0.00 g/mL and 0.72±0.00 g/mL for rambutan flour, cempedak flour, tapioca flour, nangka flour, wheat flour and durian flour, respectively. Both cempedak flour and nangka flour showed the lowest pH value (5.72±0.01, 5.73±0.00), followed by rambutan flour and durian flour (6.67±0.00, 6.90±0.00) which similar to that tapioca flour and wheat flour (6.65±0.1, 6.08±0.0), respectively. Rambutan flour, cempedak flour and wheat flours showed the highest value in% of foam stability meanwhile these composite flours showed the lowest value in% of foam capacity. Results for water absorption capacity (WAC) and oil absorption capacity (OAC) in a range of 6% to 42% and 8% to 12% respectively, however, durian flour obtained the highest value for WAC while the value for OAC was the lowest. All of the composite flour possesses gelling properties at 13% concentration except for cempedak flour which completely gels at 20% of concentration. Rambutan flour showed the highest mineral analyte particularly in Zinc (107.19±0.17) and Copper (14.22±0.27) followed by nangka flour [Zinc (64.20±0.32) and Copper (10.40±0.12)] and durian flour [Zinc (52.38±0.42) and Copper (7.97±0.05)]. Level of heavy metal toxicity was under risk for all types of composite flour.

scholarly journals Changes in Chemical Composition and Rice Cooking Quality Through the Utilization of Respiration Heat of Freshly Harvested Rice During Storage

2017 ◽  
Vol 5 (2) ◽  
pp. 43 ◽  
Author(s):  
Tanwirul Millati ◽  
Arief Rahmad Maulana Akbar ◽  
Susi Susi ◽  
Alia Rahmi
Keyword(s):  
Chemical Composition ◽  
Water Absorption ◽  
Protein Content ◽  
Storage Time ◽  
Cooking Quality ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Plastic Bag ◽  
Black Plastic ◽  
And Storage

This study aims to determine the effect of the type of packaging and storage time on the chemical composition and rice cooking quality by utilizing the respiration generated heat of freshly harvested rice. “Siam Pandak” variety of freshly harvested rice stored in black plastic bag and tarpaulin with storage time of 0, 1, 2, 3, 4 and 5 days. The results showed that the accumulation of respiration heat of freshly harvested rice during storage is only capable of raising the temperature in the packaging up to 28 – 31°C, slightly higher than room temperature ranging between 26 – 29°C. Types of packaging and storage time could increase water absorption capacity, protein and fiber contents; and reduce fat and carbohydrate contents. The increase in water absorption capacity was obtained in black plastic bag with storage time of one day, which amounted to 298.27% (an increase of 27.74% compared to control), the highest protein content with storage time of two days with a protein content of 8.56% (an increase of 7.31% compared to control), fiber content in the tarp packaging with storage time of five days, which amounted to 2.40% (an increase of 96.46% compared to control).

scholarly journals KARAKTERISTIK MUTU BUBUK OKARA HASIL KERAGAMAN PERLAKUAN HIDROTERMAL DAN SUHU PENGERINGAN

2019 ◽  
Vol 13 (02) ◽  
pp. 108
Author(s):  
Iwan Taruna
Keyword(s):  
Water Absorption ◽  
Hydrothermal Treatment ◽  
Ph Value ◽  
Particle Density ◽  
B Value ◽  
Absorption Capacity ◽  
Convective Drying ◽  
Enzymatic Browning ◽  
Oil Absorption ◽  
Water Absorption Capacity

The present study aimed to investigate the influences of experimental variables, i.e. hydrothermal treatments (whithout and treated) and convective drying temperatures (70, 80 and 90°C) on the quality characteristics of okara powders. The quality parameters of the okara powder studied in this experiment consisted of color attributes, particle density, water absorption capacity, oil absorption capacity, pH, viscosity, and non-enzymatic browning. The results showed that the quality of okara powders varied depending on the experimental variables. Hydrothermal treatment and drying of okara at lower temperatures could increase the brightness (L value) from 62.37 to 70.23, and increased the b value of okara powder color from 43.65 to 49.16. However, the particle density (1.04-1.35 g/cm3) and pH value (6.48-6.78) of okara powders were not significantly affected by hydrothermal treatment. The okara powder solution with hydrothermal treatment (2.10-4.50 cP) showed a lower average viscosity value compared to okara powder without hydrothermal treatment ((2.60-4.80 cP). The study also concluded that okara powder absorbed significantly more water rather than absorbing oil, as indicated by the value of water absorption capacity (4.7-5.7 mL/g), which greater than oil absorption capacity (1.1-1.4 mL/g). Non-enzymatic browning occurrence on okara powder samples (OD = 0.52-0.66) was more affected by the drying temperature than hydrothermal treatment. Keywords: convective drying, hydrothermal treatment, okara powder quality

Sign in / Sign up

Export Citation Format

Share Document