scholarly journals Numerical study of heat transfer enhancement in the entrance region for low-pressure gaseous laminar pipe flows using Al2O3–air nanofluid

2018 ◽  
Vol 10 (7) ◽  
pp. 168781401878441 ◽  
Author(s):  
Wael Al-Kouz ◽  
Rafat Al-Waked ◽  
Ma’en Sari ◽  
Wahib Owhaib ◽  
Anas Atieh
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Knudsen Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Low Pressure ◽  
Entrance Region ◽  
Physical Parameters ◽  
Nanoparticles Volume Fraction

The gaseous low-pressure nanofluid flow of a steady-state two-dimensional laminar forced convection heat transfer in the entrance region of pipes is numerically investigated. Such flows are of interest for many engineering applications like the nuclear reactor and electronic equipment cooling, heat exchangers, and many others. Physical parameters considered in this study are Reynolds number ( Re), Prandtl number ( Pr), nanosolid particles volume fraction [Formula: see text], Knudsen number ( Kn), and the aspect ratio ( AR). These parameters ranges are as follows: [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text]. The outcome of this study shows that by increasing Kn, velocity slip and temperature jump at the solid boundaries increase. In addition, heat transfer is enhanced by dispersing Al2O3 nanoparticles in the base low-pressure gaseous flow. Results show that there is no effect of the nanoparticles volume fraction with values below 0.03 on the average Nusselt number. The average Nusselt number increases [Formula: see text] as the value of the nanoparticles volume fraction exceeds 0.03. For instance, at Re = 1000, results show that when dispersing Al2O3 nanosolid particles with volume fractions of 0.3 and 0.5; there is an enhancement in the average Nusselt number of 30.35% and 136.74%, respectively, when compared to the case of dispersing Al2O3 nanosolid particles of 0.03 volume fraction.. Moreover, it is concluded that the average Nusselt number [Formula: see text] depends directly on Reynolds ( Re), Prandtl ( Pr) numbers, and the nanoparticles volume fraction [Formula: see text] and inversely on Knudsen number ( Kn) and the aspect ratio ( AR) for the investigated range of parameters considered in this study. Finally, a correlation of Nusselt number among all the investigated parameters in this study is proposed as [Formula: see text].

scholarly journals Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 449 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Rotational Velocity ◽  
Rotating Cone ◽  
The Impact

Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 − 4 and 5 × 10 − 2 ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.

Effects of Variable Viscosity and Thermal Conductivity of CuO-Water Nanofluid on Heat Transfer Enhancement in Natural Convection: Mathematical Model and Simulation

2010 ◽  
Vol 132 (5) ◽  
Author(s):  
Eiyad Abu-Nada
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Cylinder Surface ◽  
Transfer Enhancement

Heat transfer enhancement in horizontal annuli using variable thermal conductivity and variable viscosity of CuO-water nanofluid is investigated numerically. The base case of simulation used thermal conductivity and viscosity data that consider temperature property dependence and nanoparticle size. It was observed that for Ra≥104, the average Nusselt number was deteriorated by increasing the volume fraction of nanoparticles. However, for Ra=103, the average Nusselt number enhancement depends on aspect ratio of the annulus as well as volume fraction of nanoparticles. Also, for Ra=103, the average Nusselt number was less sensitive to volume fraction of nanoparticles at high aspect ratio and the average Nusselt number increased by increasing the volume fraction of nanoaprticles for aspect ratios ≤0.4. For Ra≥104, the Nusselt number was deteriorated everywhere around the cylinder surface especially at high aspect ratio. However, this reduction is only restricted to certain regions around the cylinder surface for Ra=103. For Ra≥104, the Maxwell–Garnett and the Chon et al. conductivity models demonstrated similar results. But, there was a deviation in the prediction at Ra=103 and this deviation becomes more significant at high volume fraction of nanoparticles. The Nguyen et al. data and the Brinkman model give completely different predictions for Ra≥104, where the difference in prediction of the Nusselt number reached 50%. However, this difference was less than 10% at Ra=103.

Three-Dimensional Numerical Simulation of Mixed Convective Heat Transfer in a Horizontal Rectangular Duct Utilizing Nanofluids

2014 ◽  
Vol 1016 ◽  
pp. 738-742
Author(s):  
Nur Irmawati Om ◽  
H.A. Mohammed
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Rectangular Duct ◽  
Thermal Fields ◽  
Nanoparticles Volume Fraction

Predictions are reported for three-dimensional laminar mixed convective heat transfer using nanofluids in a horizontal rectangular duct. Five different types of nanoparticle, Ag, Al2O3, Au, Cu and SiO2 with nanoparticles volume fractions range of 2% to 10% are investigated. In this study, the effects of nanofluids type, nanoparticles volume fraction of nanofluids and the effect of aspect ratio on the thermal fields were examined. Results reveal that the addition of nanoparticles to the base fluid and their volume fraction tend to increase the Nusselt number along the horizontal rectangular duct (i.e., increases the rate of heat transfer). It was also found that the Nusselt number increases as the aspect ratio decreases.

Heat transfer characteristics of nanofluids from a sinusoidal corrugated cylinder placed in a square cavity

2021 ◽  
pp. 095440622110272
Author(s):  
Salaika Parvin ◽  
Nepal Chandra Roy ◽  
Litan Kumar Saha ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Heat Transfer Characteristics ◽  
Number Range ◽  
Transfer Characteristics ◽  
Wide Range

A numerical study is performed to investigate nanofluids' flow field and heat transfer characteristics between the domain bounded by a square and a wavy cylinder. The left and right walls of the cavity are at constant low temperature while its other adjacent walls are insulated. The convective phenomena take place due to the higher temperature of the inner corrugated surface. Super elliptic functions are used to transform the governing equations of the classical rectangular enclosure into a system of equations valid for concentric cylinders. The resulting equations are solved iteratively with the implicit finite difference method. Parametric results are presented in terms of streamlines, isotherms, local and average Nusselt numbers for a wide range of scaled parameters such as nanoparticles concentration, Rayleigh number, and aspect ratio. Several correlations have been deduced at the inner and outer surface of the cylinders for the average Nusselt number, which gives a good agreement when compared against the numerical results. The strength of the streamlines increases significantly due to an increase in the aspect ratio of the inner cylinder and the Rayleigh number. As the concentration of nanoparticles increases, the average Nusselt number at the internal and external cylinders becomes stronger. In addition, the average Nusselt number for the entire Rayleigh number range gets enhanced when plotted against the volume fraction of the nanofluid.

scholarly journals Mixed convection of functionalized DWCNT-water nanofluid in baffled lid-driven cavities

2018 ◽  
Vol 22 (6 Part A) ◽  
pp. 2503-2514 ◽  
Author(s):  
Esfe Hemmat ◽  
Arani Abbasian ◽  
Wei-Mon Yan ◽  
Alireza Aghaie ◽  
Masoud Afrand ◽  
...  
Keyword(s):  
Nusselt Number ◽  
Mixed Convection ◽  
Richardson Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Minimum Length ◽  
Convection Flow ◽  
Flow And Heat Transfer ◽  
Inclination Angles ◽  
Nanoparticles Volume Fraction

The present study aims to evaluate the mixed convection flow and heat transfer of functionalized DWCNT/water nanofluids with variable properties in a cavity having hot baffles. The investigation is performed at different nanoparticles volume fraction including 0, 0.0002, 0.001, 0.002, and 0.004, Richardson numbers ranging from 0.01 to 100, inclination angles ranging from 0 to 60? and at constant Grashof number of 104. The results presented as streamlines and isotherms plot and Nusselt number diagrams. According to the finding with increasing nanoparticles volume fraction and distance between the left hot baffles of nanoparticles average Nusselt number enhances for all considered Richardson numbers and cavity inclination angles. Also with increasing Richardson number, the rate of changes of average Nusselt number increase with increasing distance between the left hot baffles. For example, at Richardson number of 0.01, by increasing L1 from 0.4 to 0.6, the average Nusselt number increases 7%; while for similar situation at Richardson number of 0.1, 1.0, and 10, the average Nusselt number increases, respectively, 17%, 24%, and 26%. At all Richardson numbers, the maximum value of average Nusselt number is achieved for a minimum length of left baffles. <br><br><font color="red"><b> This article has been corrected. Link to the correction <u><a href="http://dx.doi.org/10.2298/TSCI190203032E">10.2298/TSCI190203032E</a><u></b></font>

CFD Investigation of Al2O3 Nanoparticles Effect on Heat Transfer Enhancement of Newtonian and Non-Newtonian Fluids in a Helical Coil

2019 ◽  
Vol 14 (3) ◽  
Author(s):  
Javad Aminian Dehkordi ◽  
Arezou Jafari
Keyword(s):  
Heat Transfer ◽  
Aqueous Solution ◽  
Nusselt Number ◽  
Base Fluid ◽  
Volume Fraction ◽  
Reynolds Numbers ◽  
Helical Coil ◽  
Al2o3 Nanoparticles ◽  
Nanoparticles Volume Fraction ◽  
Computational Fluid Dynamics Cfd

Abstract The present study applied computational fluid dynamics (CFD) to investigate the heat transfer of Newtonian (water) and non-Newtonian (0.3 %wt. aqueous solution of carboxymethylcellulose (CMC)) fluids in the presence of Al2O3 nanoparticles. To analyze the heat transfer rate, investigations were performed in a vertical helical coil as essential heat transfer equipment, at different inlet Reynolds numbers. To verify the accuracy of the simulation model, experimental data reported in the literature were employed. Comparisons showed the validity of simulation results. From the results, compared to the aqueous solution of CMC, water had a higher Nusselt number. In addition, it was observed that adding nanoparticles to a base fluid presented different results in which water/Al2O3 nanofluid with nanoparticles’ volume fraction of 5 % was more effective than the same base fluid with a volume fraction of 10 %. In lower ranges of Reynolds number, adding nanoparticles was more effective. For CMC solution (10 %), increasing concentration of nanoparticles caused an increase in the apparent viscosity. Consequently, the Nusselt number was reduced. The findings reveal the important role of fluid type and nanoparticle concentration in the design and development of heat transfer equipment.

Natural convective heat transfer in a hemispherical cavity filled with ZnO–H2O nanofluid saturated porous medium

2018 ◽  
Vol 29 (10) ◽  
pp. 1850097 ◽  
Author(s):  
Abderrahmane Baïri ◽  
Najib Laraqi
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Volume Fraction ◽  
Saturated Porous Medium ◽  
Physical Parameters ◽  
Numerical Work

This three-dimensional (3D) numerical work based on the volume control method quantifies the convective heat transfer occurring in a hemispherical cavity filled with a ZnO–H2O nanofluid saturated porous medium. Its main objective is to improve the cooling of an electronic component contained in this enclosure. The volume fraction of the considered monophasic nanofluid varies between 0% (pure water) and 10%, while the cupola is maintained isothermal at cold temperature. During operation, the active device generates a heat flux leading to high Rayleigh number reaching [Formula: see text] and may be inclined with respect to the horizontal plane at an angle ranging from 0[Formula: see text] to 180[Formula: see text] (horizontal position with cupola facing upwards and downwards, respectively) by steps of 15[Formula: see text]. The natural convective heat transfer represented by the average Nusselt number has been quantified for many configurations obtained by combining the tilt angle, the Rayleigh number, the nanofluid volume fraction and the ratio between the thermal conductivity of the porous medium’s solid matrix and that of the base fluid. This ratio has a significant influence on the free convective heat transfer and ranges from 0 (without porous media) to 70 in this work. The influence of the four physical parameters is analyzed and commented. An empirical correlation between the Nusselt number and these parameters is proposed, allowing determination of the average natural convective heat transfer occurring in the hemispherical cavity.

Effects of Nanoparticle Shape on Slot-Jet Impingement Cooling of a Corrugated Surface With Nanofluids

2017 ◽  
Vol 9 (2) ◽  
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Öztop
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Jet Impingement ◽  
Heat Transfer Characteristics ◽  
Impingement Cooling ◽  
Corrugated Surface ◽  
Nanoparticle Shapes

Numerical study of jet impingement cooling of a corrugated surface with water–SiO2 nanofluid of different nanoparticle shapes was performed. The bottom wall is corrugated and kept at constant surface temperature, while the jet emerges from a rectangular slot with cold uniform temperature. The finite volume method is utilized to solve the governing equations. The effects of Reynolds number (between 100 and 500), corrugation amplitude (between 0 and 0.3), corrugation frequency (between 0 and 20), nanoparticle volume fraction (between 0 and 0.04), and nanoparticle shapes (spherical, blade, brick, and cylindrical) on the fluid flow and heat transfer characteristics were studied. Stagnation point and average Nusselt number enhance with Reynolds number and solid particle volume fraction for both flat and corrugated surface configurations. An optimal value for the corrugation amplitude and frequency was found to maximize the average heat transfer at the highest value of Reynolds number. Among various nanoparticle shapes, cylindrical ones perform the best heat transfer characteristics in terms of stagnation and average Nusselt number values. At the highest solid volume concentration of the nanoparticles, heat transfer values are higher for a corrugated surface when compared to a flat surface case.

scholarly journals ISPH simulations of natural convection from heated rotating paddles on a circular cylinder inside a cross-shaped cavity filled with a nanofluid

2020 ◽  
Author(s):  
Abdelraheem Mahmoud Aly ◽  
Ehab Mahmoud
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Circular Cylinder ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Heterogeneous Porous Media ◽  
Convection Flow

The numerical simulations of the uniform circular rotation of paddles on circular cylinder results natural convection flow of Al2O3-water in a cross-shaped porous cavity were performed by incompressible representation of smoothed particle hydrodynamics entitled ISPH method. The two vertical area of a cross-shaped cavity is saturated with homogeneous porous media and the whole horizontal area of a cross-shaped cavity is saturated with heterogeneous porous media. The inner paddles on the circular cylinder are rotating around their center by a uniform circular velocity. The whole embedded body of paddles on a circular cylinder has temperature Th. The wall-sides of a cross-shaped cavity are positioned at a temperature Tc. The current geometry can be applied in analysis and understanding the thermophysical behaviors of the electronic motors. The angular velocity is taken as ! = 7:15 and consequently the natural convection case is only considered due to the low speed of inner rotating shape. The performed simulations are represented in the graphical for the temperature distributions, velocity fields and tabular forms for average Nusselt number. The results revealed that an augmentation on paddle length rises the heat transfer and speed of fluid flow inside a cross shaped cavity. Also, an incrementation on Rayleigh number augments the heat transfer and speed of the fluid flow inside a cross-shaped cavity. The fluid flow is circulated only around the rotating inner shape when Darcy parameter decreases to Da = 105. Average Nusselt number Nu enhances by an increment on the paddle lengths and nanoparticles volume fraction

Sign in / Sign up

Export Citation Format

Share Document