scholarly journals Low dosage nano-silica modification on lightweight aggregate concrete

2018 ◽  
Vol 8 ◽  
pp. 184798041876128 ◽  
Author(s):  
Pengyu Zhang ◽  
Ning Xie ◽  
Xin Cheng ◽  
Lichao Feng ◽  
Pengkun Hou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
High Performance ◽  
Lightweight Concrete ◽  
Hydration Product ◽  
Lightweight Aggregate Concrete ◽  
Lightweight Aggregates ◽  
Hydration Products ◽  
Nano Silica ◽  
Low Dosage

Although the nano modification has been considered as a promising approach to enhance the mechanical properties of cement-based concrete, the investigation of low dosage nano modification on lightweight cement-based concrete is still very limited. In this study, the lightweight concrete, which was modified with low dosage nano-silica particles, were investigated. Non-prewetting and prewetting methods were used to prepare the lightweight concrete samples. The compressive and flexural strengths were tested to evaluate the modification effects of low dosage nano-silica on lightweight concrete. The microstructure analyses demonstrate that the hydration process of the cement paste can be changed with addition of nano-silica, and new types of hydration products have been observed in nano modified cementitious matrix. The interface between the lightweight aggregates and the cement paste can be reinforced by low dosage of nano-silica due to the new types of hydration products. However, relatively high dosage of nano-silica will reduce the modification effect because of the internal stress, which is resulted from the volume expansion of the new types of hydration product, at the interface of the lightweight aggregates and the cement paste. This study not only shows the possibility of low dosage nano modification on the mechanical properties enhancement of lightweight concrete but also provides potential modification mechanisms, which help to design and fabricate high-performance lightweight concrete materials.

Influence of Lightweight Aggregate on Durability of High Performance Concrete

2009 ◽  
Vol 405-406 ◽  
pp. 197-203
Author(s):  
Bao Sheng Zhang ◽  
Li Juan Kong ◽  
Yong Ge
Keyword(s):  
Pore Structure ◽  
Cement Paste ◽  
Frost Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
Bound Water ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete

High performance concrete (HPC) with a water/cement ratio (w/c) of 0.32 and different lightweight aggregate (LWA) contents (0%, 25%, 50%, 75%, 100%) were prepared, and the influence of LWA on concrete frost-resistance and impermeability at different ages were studied, as well as the hydration degree, hydrated product, pattern and pore structure of the paste around aggregate. The results show that, by replacing normal weight aggregate (NWA) with 50% and 100% volume contents of pre-wetted LWA respectively, the chemical bound water of the cement paste surrounding aggregate are increased 12.1% and 22.7% as compared to concrete mixed without LWA. And at 28 days, lightweight aggregate concrete has the highest Ca(OH)2 content, whereas the 90-day Ca(OH)2 content of normal weight concrete is the highest. This proves that, with the increase of LWA content in concrete, both of the internal curing effect of pre-wetted LWA and secondary hydration effect of fly ash (FA) are strengthened, this can also be verified by the SEM study. Furthermore, the pore structure of the cement paste around aggregate can be improved consequently. The performance of frost-resistance of HPC can be improved by mixing LWA, the 90 day-frost-resistance of lightweight aggregate concrete is about 2.5 times of that of concrete mixed without LWA. The influence of LWA on the impermeability of HPC is different from normal concrete. When LWA content is more than 50%, the HPC impermeability decreased obviously, however at later age the difference between them becomes minor.

Lightweight Aggregate Concrete as an Alternative for Dense Concrete in Post-Tensioned Concrete Slab

2018 ◽  
Vol 926 ◽  
pp. 140-145 ◽  
Author(s):  
Małgorzata Mieszczak ◽  
Lucyna Domagała
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
Concrete Slab ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Large Span ◽  
Shrinkage And Creep ◽  
Theoretical Results ◽  
Post Tensioned

The paper presents the results of tests conducted on two lightweight aggregate concretes made of new national Certyd artificial aggregate. This research is intended to first application of lightweight concrete to construct large-span post-tensioned slab. In addition to mechanical properties development, shrinkage and creep during 3 months of loading were tested. The obtained results are compared with theoretical results predicted by standard. Conducted tests indicated, that measured values of shrinkage and creep are significantly lower than predicted ones. This is promise for application of tested concrete in construction of post-tensioned slabs.

scholarly journals Characterization of lightweight concrete made of palm oil clinker aggregates

2018 ◽  
Vol 250 ◽  
pp. 03002 ◽  
Author(s):  
Muhammad Sazlly Nazreen ◽  
Roslli Noor Mohamed ◽  
Mariyana Aida Ab Kadir ◽  
Nazry Azillah ◽  
Nazirah Ahmad Shukri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Palm Oil ◽  
Lightweight Concrete ◽  
Flexural Modulus ◽  
Pulse Velocity ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Fine Aggregate ◽  
Test Results ◽  
Aggregate Concrete

Lightweight concrete (LWC) has been identified as an innovative technique for construction purposes. Lightweight concrete can be categorized into three different types which are no-fine aggregate concrete, lightweight aggregate concrete and aerated concrete. This paper studied the characteristic of the lightweight concrete in term of mechanical properties utilizing the palm oil clinker (POC) as lightweight aggregates. Two mixes of lightweight concrete were developed, namely as POCC100 and POCC50 where each mix utilized 100% and 50% of total replacement to fine and coarse aggregates, respectively. The fresh and hardened POC concrete was tested and compared to the normal concrete (NC). The hardened state of the concrete was investigated through density test, ultrasonic pulse velocity, cube compressive, splitting tensile, flexural, modulus of elasticity and Poisson's ratio. From density test results, POC falls into the category of lightweight concrete with a density of 1990.33 kg/m3, which are below than normal weight concrete density. The mechanical properties test results on POCC100 and POCC50 showed that the concrete compressive strength was comparable about 85.70% and 96% compared to NC specimen, respectively. For the flexural strength, POCC50 and POCC100 were comparable about 98% and 97% to NC specimen, respectively. While splitting tensile strength of POCC50 and POCC100 was only 0.6% and 4% lower than NC specimen, respectively. In terms of sustainability of solid waste management, the application of the POC in construction will reduce the redundant of by-products resulted from the palm oil industries. After undergoing various testing of concrete mechanical properties, it can be concluded that POC aggregates was compatible to be used in ligtweight concrete mix proportion.

scholarly journals Recycled Plastic and Cork Waste for Structural Lightweight Concrete Production

2019 ◽  
Vol 11 (7) ◽  
pp. 1876 ◽  
Author(s):  
Carlos Parra ◽  
Eva M. Sánchez ◽  
Isabel Miñano ◽  
Francisco Benito ◽  
Pilar Hidalgo
Keyword(s):  
Compression Strength ◽  
High Performance ◽  
Lightweight Concrete ◽  
Chloride Ion ◽  
Total Porosity ◽  
Lightweight Aggregates ◽  
Chloride Ion Penetration ◽  
Concrete Production ◽  
Risk Areas ◽  
Strength And Durability

The use of waste materials as lightweight aggregates in concrete is highly recommended in seismic risk areas and environmentally recommended. However, reaching the strength needed for the concrete to be used structurally may be challenging. In this study four dosages were assayed: the first two-specimen had high cement content (550 and 700 kg/m3 respectively), Nanosilica, fly ash and superplasticizer. These samples were high performance, reaching a strength of 100MPa at 90 days. The other two mixtures were identical but replaced 48% of the aggregates with recycled lightweight aggregates (30% polypropylene, 18.5% cork). To estimate its strength and durability the mixtures were subjected to several tests. Compression strength, elasticity modulus, mercury intrusion porosimetry, carbonation, attack by chlorides, and penetration of water under pressure were analyzed. The compression strength and density of the lightweight mixtures were reduced 68% and 19% respectively; nonetheless, both retained valid levels for structural use (over 30MPa at 90 days). Results, such as the total porosity between 9.83% and 17.75% or the chloride ion penetration between 8.6 and 5.9mm, suggest that the durability of these concretes, including the lightweight ones, is bound to be very high thanks to a very low porosity and high resistance to chemical attacks.

Experimental Study on the Performance and Microstructure of Rubberized Lightweight Aggregate Concrete

2012 ◽  
Vol 28 (4) ◽  
pp. 147-156 ◽  
Author(s):  
Guiming Wang ◽  
Bin Zhang ◽  
Zhonghe Shui ◽  
Daoyi Tang ◽  
Yun Kong
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Lightweight Aggregate ◽  
Crumb Rubber ◽  
Bonding Interface ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Micro Level ◽  
Airport Runway ◽  
The Relationship

It is of great significance to improve the flexibility of concrete for specific applications, such as a tunnel pavement or an airport runway. This paper presents the structural properties of the rubberized lightweight aggregate concrete at the macro- and micro-level. The relationship between mechanical properties and microstructure features was further explored. An experimental programme was developed to use crumb rubber and shale ceramsite to produce a flexible concrete. Much attention was paid to the influence of the crumb rubber dosage. The compressive strength and elastic modulus of the rubberized lightweight aggregate concrete were measured. Furthermore, the corresponding microstructure was evaluated by microhardness assessment and microscopic observation. Experimental results show that with the increase of crumb rubber dosage, the bonding interface between the rubber and cement paste, as well as between the shale ceramsite and cement paste, gradually became weakened or flexible. In addition, the width of the weak bonding interface became wider. As a result the flexibility of lightweight aggregate concrete can be effectively improved by correctly adjusting the crumb rubber dosage.

scholarly journals Mechanical properties and microstructure of high performance concrete containing stabilized nano-silica

2017 ◽  
Vol 22 (2) ◽  
Author(s):  
Gustavo Braz de Abreu ◽  
Suéllen Mota Marques Costa ◽  
Adriana Guerra Gumieri ◽  
José Márcio Fonseca Calixto ◽  
Fabrício Carlos França ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
Nano Silica

Utilization of Nano Silica as Cement Paste in Mortar and Porous Concrete Pavement

2015 ◽  
Vol 1113 ◽  
pp. 135-139 ◽  
Author(s):  
Mohd Yusak Mohd Ibrahim ◽  
Putra Jaya Ramadhansyah ◽  
Hainin Mohd Rosli ◽  
Mohd Haziman Wan Ibrahim ◽  
M.N. Fadzli
Keyword(s):  
Mechanical Properties ◽  
Cement Paste ◽  
Cementitious Materials ◽  
Concrete Pavement ◽  
Strengthening Effect ◽  
Nano Silica ◽  
Porous Concrete ◽  
The Right

The high percentage of porosity in porous concrete pavement tends to decrease its strength. In concrete industry, nano silica is one of the most popular materials that will improve the properties of cementitious materials. This paper, prepared to review the effect of nano silica in cement paste and mortar related to porous concrete pavement. It was found that, by incorporating nano silica with the right composition in cement paste and mortar, it will improve their mechanical properties. By incorporating nano silica in the mixture, it can be predicted that the strengthening effect of nano silica would be further enhanced in porous concrete because the nano silica improve not only the cement paste, but also the interface between paste and aggregate.

Sign in / Sign up

Export Citation Format

Share Document