scholarly journals Deriving intensity–duration–frequency (IDF) curves using downscaled in situ rainfall assimilated with remote sensing data

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Yabin Sun ◽  
Dadiyorto Wendi ◽  
Dong Eon Kim ◽  
Shie-Yui Liong
Keyword(s):  
Remote Sensing ◽  
Daily Rainfall ◽  
Remote Sensing Data ◽  
Rainfall Events ◽  
Hourly Rainfall ◽  
Idf Curves ◽  
Intensity Duration Frequency ◽  
Improved Accuracy

AbstractThe rainfall intensity–duration–frequency (IDF) curves play an important role in water resources engineering and management. The applications of IDF curves range from assessing rainfall events, classifying climatic regimes, to deriving design storms and assisting in designing urban drainage systems, etc. The deriving procedure of IDF curves, however, requires long-term historical rainfall observations, whereas lack of fine-timescale rainfall records (e.g. sub-daily) often results in less reliable IDF curves. This paper presents the utilization of remote sensing sub-daily rainfall, i.e. Global Satellite Mapping of Precipitation (GSMaP), integrated with the Bartlett-Lewis rectangular pulses (BLRP) model, to disaggregate the daily in situ rainfall, which is then further used to derive more reliable IDF curves. Application of the proposed method in Singapore indicates that the disaggregated hourly rainfall, preserving both the hourly and daily statistic characteristics, produces IDF curves with significantly improved accuracy; on average over 70% of RMSE is reduced as compared to the IDF curves derived from daily rainfall observations.

scholarly journals Accomplishments of the MUSICA project to provide accurate, long-term, global and high-resolution observations of tropospheric {H<sub>2</sub>O,<i>δ</i>D} pairs – a review

2016 ◽  
Vol 9 (7) ◽  
pp. 2845-2875 ◽  
Author(s):  
Matthias Schneider ◽  
Andreas Wiegele ◽  
Sabine Barthlott ◽  
Yenny González ◽  
Emanuel Christner ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Measurement Techniques ◽  
Remote Sensing Data ◽  
Global Scale ◽  
Horizontal Resolution ◽  
Atmospheric Composition ◽  
Remote Sensing Techniques ◽  
Middle Infrared

Abstract. In the lower/middle troposphere, {H2O,δD} pairs are good proxies for moisture pathways; however, their observation, in particular when using remote sensing techniques, is challenging. The project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water) addresses this challenge by integrating the remote sensing with in situ measurement techniques. The aim is to retrieve calibrated tropospheric {H2O,δD} pairs from the middle infrared spectra measured from ground by FTIR (Fourier transform infrared) spectrometers of the NDACC (Network for the Detection of Atmospheric Composition Change) and the thermal nadir spectra measured by IASI (Infrared Atmospheric Sounding Interferometer) aboard the MetOp satellites. In this paper, we present the final MUSICA products, and discuss the characteristics and potential of the NDACC/FTIR and MetOp/IASI {H2O,δD} data pairs. First, we briefly resume the particularities of an {H2O,δD} pair retrieval. Second, we show that the remote sensing data of the final product version are absolutely calibrated with respect to H2O and δD in situ profile references measured in the subtropics, between 0 and 7 km. Third, we reveal that the {H2O,δD} pair distributions obtained from the different remote sensors are consistent and allow distinct lower/middle tropospheric moisture pathways to be identified in agreement with multi-year in situ references. Fourth, we document the possibilities of the NDACC/FTIR instruments for climatological studies (due to long-term monitoring) and of the MetOp/IASI sensors for observing diurnal signals on a quasi-global scale and with high horizontal resolution. Fifth, we discuss the risk of misinterpreting {H2O,δD} pair distributions due to incomplete processing of the remote sensing products.

Estimation of River Discharge using Multi-Mission Satellite Altimetry and Optical Remote Sensing Imagery

2020 ◽  
Author(s):  
Daniel Scherer ◽  
Christian Schwatke ◽  
Denise Dettmering
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Water Level ◽  
River Discharge ◽  
Water Surface ◽  
Satellite Altimetry ◽  
Remote Sensing Data ◽  
Sensing Data

&lt;p&gt;Despite increasing interest in monitoring the global water cycle, the availability of in-situ discharge time series is decreasing. However, this lack of ground data can be compensated by using remote sensing techniques to observe river discharge.&lt;/p&gt;&lt;p&gt;In this contribution, a new approach for estimating the discharge of large rivers by combining various long-term remote sensing data with physical flow equations is presented. For this purpose, water levels derived from multi-mission satellite altimetry and water surface extents extracted from optical satellite images are used, both provided by DGFI-TUM&amp;#8217;s &amp;#8220;Database of Hydrological Time series of Inland Waters&amp;#8221; (DAHITI, https://dahiti.dgfi.tum.de). The datasets are combined by fitting a hypsometric curve in order to describe the stage-width relation, which is then used to derive the water level for each acquisition epoch of the long-term multi-spectral remote sensing missions. In this way, the chance of detecting water level extremes is increased and a bathymetry can be estimated from water surface extent observations. Below the minimum hypsometric water level, the river bed elevation is estimated using an empirical width-to-depth relationship in order to determine the final cross-sectional geometry. The required flow gradient is computed based on a linear adjustment of river surface slope using all altimetry-observed water level differences between synchronous measurements at various virtual stations along the river. The roughness coefficient is set based on geomorphological features quantified by adjustment factors. These are chosen using remote sensing data and a literature decision guide.&lt;/p&gt;&lt;p&gt;Within this study, all parameters are estimated purely based on remote sensing data, without using any ground data. In-situ data is only used for the validation of the method at the Lower Mississippi River. It shows that the presented approach yields best results for uniform and straight river sections. The resulting normalized root mean square error for those targets varies between 10% to 35% and is comparable with other studies.&lt;/p&gt;

scholarly journals Modeling of IDF curves for stormwater design in Makkah Al Mukarramah region, The Kingdom of Saudi Arabia

2018 ◽  
Vol 10 (1) ◽  
pp. 954-969 ◽  
Author(s):  
Hatem A. Ewea ◽  
Amro M. Elfeki ◽  
Jarbou A. Bahrawi ◽  
Nassir S. Al-Amri
Keyword(s):  
Saudi Arabia ◽  
Probability Distributions ◽  
Daily Rainfall ◽  
Type I ◽  
Kingdom Of Saudi Arabia ◽  
Hourly Data ◽  
Idf Curves ◽  
Intensity Duration Frequency ◽  
Negative Impacts

Abstract Reducing the negative impacts of flooding in Makkah AL Mukarramah region in the Kingdom of Saudi Arabia (KSA) is of utmost importance. In the last decade, there are huge mega infrastructure projects in KSA in general and in Makkah AL Mukarramah region in particular. These projects require adequate stormwater drainage systems. Since, the availability of rainfall and runoff data are scarce, engineers and hydrologists rely on models developed in temperature regions that are not hydrologically similar from temperate regions. This leads to inaccurate designs of stormwater facilities. Therefore, deveoping in situ Intensity-Duration-Frequency (IDF) curves is a must in this arid region. This paper aims at modeling IDF curves for Makkah Al-Mukarramah region. Maximum annual daily rainfall series of 80 storms (with sub-hourly and hourly data) from four stations are investigated through six different probability distributions. Consequently, rainfall depth-duration-frequency models and curves are derived. Results revealed that the Gumbel Type I is the optimal one. Thus, it is used to deduce the IDF curves and relations for each station and for the region as a whole. The R2 value for fitting power-lawfunction (i = a Db) to the data is very high for the IDF parameters. The R2 for the coefficient parameter, a, is between 0.9999 and 0.9988 while it ranges between 0.8754 and 0.8039 for exponent parameter, b. High correlation coefficient (more than 0.95) has been obtained. The resulting IDF models are strongly recommended for rigorous, effective and safe design of the stormwater systems in Makkah Al-Mukarramah region.

scholarly journals The remarkable population size of the endangered clam Tridacna maxima assessed in Fangatau Atoll (Eastern Tuamotu, French Polynesia) using in situ and remote sensing data

2005 ◽  
Vol 62 (6) ◽  
pp. 1037-1048 ◽  
Author(s):  
Serge Andréfouët ◽  
Antoine Gilbert ◽  
Laurent Yan ◽  
Georges Remoissenet ◽  
Claude Payri ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Remote Sensing Data ◽  
French Polynesia ◽  
Benthic Habitat ◽  
Sensing Platforms ◽  
Density Values ◽  
Tridacna Maxima ◽  
Harvesting Techniques

AbstractSeveral lagoons of the Eastern Tuamotu Atolls (French Polynesia) are characterized by enormous populations of the clam Tridacna maxima, a species considered as endangered in many locations worldwide. This unique resource is virtually intact, until recently being impacted only by local consumption. Increasing exports to Tahiti's market (up to 50 tonnes of wet matter y−1), combined with the relatively small size of these lagoons (<50 km2), have raised significant concerns for agencies charged with management of lagoonal resources. In order to evaluate whether the current harvesting pressure threatens long-term sustainability of this resource, it is necessary to estimate the total number of individual clams present and also the fraction of that stock that is currently targeted by fishers, who generally collect clams in very shallow waters (<1 m), walking on the reef edges. Here, we present results for a pilot study evaluating this resource at Fangatau Atoll. Using a combination of data collected in situ and three remotely sensed images with different spatial resolution (1.5, 5.6, and 30 m), we estimate that the shallowest lagoonal areas (4.05 km2 at depth <6 m) harbour five classes of benthic habitat with significantly different clam areal covers and densities. Considering the cover/density values for each habitat class, 23.65 ± 5.33 million clams (mean ± 95% confidence interval) inhabit these 4.05 km2. Assuming that current harvesting techniques will be maintained in the future, the commercially available stock represents 44% of the population located on 1.18 km2 of the shallow lagoon. A comparison of results from the three remote sensing platforms indicates that high resolution, broadband multispectral sensors (e.g. IKONOS, Quickbird) should provide the best existing platforms to conduct similar assessments elsewhere.

scholarly journals A framework for accurate, long-term, global and high resolution observations of tropospheric H<sub>2</sub>O-δD pairs – a MUSICA review

2016 ◽  
Author(s):  
M. Schneider ◽  
A. Wiegele ◽  
S. Barthlott ◽  
Y. González ◽  
E. Christner ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Measurement Techniques ◽  
Remote Sensing Data ◽  
Global Scale ◽  
Horizontal Resolution ◽  
Atmospheric Composition ◽  
Sensing Data ◽  
Middle Infrared

Abstract. Abstract. In the lower/middle troposphere H2O-δD pairs are good proxies for moisture pathways, however their observation is challenging. The project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water) addresses this challenge by integrating remote sensing with in-situ measurement techniques. The aim is to retrieve accurate tropospheric H2O-δD pairs from the middle infrared spectra measured from ground by the FTIR (Fourier Transform InfraRed) spectrometers of the NDACC (Network for the Detection of Atmospheric Composition Change) and the thermal nadir spectra measured by IASI (Infrared Atmospheric Sounding Interferometer) aboard the MetOp satellites. In this paper we review the MUSICA framework, present the final MUSICA products, and outline the NDACC/FTIR’s and METOP/IASI’s potential for observing accurate and consistent H2O-δD data pairs. First, we briefly resume the particularities of an H2O-δD pair retrieval. Second, we show that the remote sensing data of the final product version are absolutely calibrated with respect to H2O and δD in-situ profile references measured in the subtropics, between 0 and 7 km. Third, we empirically demonstrate that the calibrated remote sensing H2O-δD pairs can identify different lower/middle tropospheric moisture pathways and advert to the risk of misinterpretations caused by an incorrect processing of such remote sensing data. Fourth, we reveal that the different sensors (NDACC/FTIR instruments, MetOp/IASI-A, and MetOp/IASI-B) provide consistent H2O-δD pairs for very distinct atmospheric clear sky conditions. Fifth, we document the unique possibilities of the NDACC/FTIR instruments for providing long-term records (important for climatological studies) and of the MetOp/IASI sensors for observing diurnal signals on quasi global scale and with high horizontal resolution.

scholarly journals Deep Learning for Monitoring Agricultural Drought in South Asia Using Remote Sensing Data

2021 ◽  
Vol 13 (9) ◽  
pp. 1715
Author(s):  
Foyez Ahmed Prodhan ◽  
Jiahua Zhang ◽  
Fengmei Yao ◽  
Lamei Shi ◽  
Til Prasad Pangali Sharma ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Deep Learning ◽  
South Asia ◽  
Model Performance ◽  
Remote Sensing Data ◽  
Agricultural Drought ◽  
Gradient Boosting ◽  
Complex Nature ◽  
Sensing Data

Drought, a climate-related disaster impacting a variety of sectors, poses challenges for millions of people in South Asia. Accurate and complete drought information with a proper monitoring system is very important in revealing the complex nature of drought and its associated factors. In this regard, deep learning is a very promising approach for delineating the non-linear characteristics of drought factors. Therefore, this study aims to monitor drought by employing a deep learning approach with remote sensing data over South Asia from 2001–2016. We considered the precipitation, vegetation, and soil factors for the deep forwarded neural network (DFNN) as model input parameters. The study evaluated agricultural drought using the soil moisture deficit index (SMDI) as a response variable during three crop phenology stages. For a better comparison of deep learning model performance, we adopted two machine learning models, distributed random forest (DRF) and gradient boosting machine (GBM). Results show that the DFNN model outperformed the other two models for SMDI prediction. Furthermore, the results indicated that DFNN captured the drought pattern with high spatial variability across three penology stages. Additionally, the DFNN model showed good stability with its cross-validated data in the training phase, and the estimated SMDI had high correlation coefficient R2 ranges from 0.57~0.90, 0.52~0.94, and 0.49~0.82 during the start of the season (SOS), length of the season (LOS), and end of the season (EOS) respectively. The comparison between inter-annual variability of estimated SMDI and in-situ SPEI (standardized precipitation evapotranspiration index) showed that the estimated SMDI was almost similar to in-situ SPEI. The DFNN model provides comprehensive drought information by producing a consistent spatial distribution of SMDI which establishes the applicability of the DFNN model for drought monitoring.

scholarly journals ESTIMATION OF SURFACE SNOW WETNESS USING SENTINEL-2 MULTISPECTRAL DATA

2018 ◽  
Vol IV-5 ◽  
pp. 223-228 ◽  
Author(s):  
D. Varade ◽  
O. Dikshit
Keyword(s):  
Remote Sensing ◽  
Water Resource Management ◽  
Remote Sensing Data ◽  
Microwave Remote Sensing ◽  
In Situ Measurements ◽  
Physical Relationship ◽  
Sensing Data ◽  
Surface Snow ◽  
Sentinel 2

<p><strong>Abstract.</strong> Snow cover characterization and estimation of snow geophysical parameters is a significant area of research in water resource management and surface hydrological processes. With advances in spaceborne remote sensing, much progress has been achieved in the qualitative and quantitative characterization of snow geophysical parameters. However, most of the methods available in the literature are based on the microwave backscatter response of snow. These methods are mostly based on the remote sensing data available from active microwave sensors. Moreover, in alpine terrains, such as in the Himalayas, due to the geometrical distortions, the missing data is significant in the active microwave remote sensing data. In this paper, we present a methodology utilizing the multispectral observations of Sentinel-2 satellite for the estimation of surface snow wetness. The proposed approach is based on the popular triangle method which is significantly utilized for the assessment of soil moisture. In this case, we develop a triangular feature space using the near infrared (NIR) reflectance and the normalized differenced snow index (NDSI). Based on the assumption that the NIR reflectance is linearly related to the liquid water content in the snow, we derive a physical relationship for the estimation of snow wetness. The modeled estimates of snow wetness from the proposed approach were compared with in-situ measurements of surface snow wetness. A high correlation determined by the coefficient of determination of 0.94 and an error of 0.535 was observed between the proposed estimates of snow wetness and in-situ measurements.</p>

scholarly journals Estudo do ciclo diário da Camada Limite Planetária durante a estação cChuvosa da Amazônia (GOAmazon 2014/15)

2018 ◽  
Vol 40 ◽  
pp. 63 ◽  
Author(s):  
Rayonil Gomes Carneiro ◽  
Alice Henkes ◽  
Gilberto Fisch ◽  
Camilla Kassar Borges
Keyword(s):  
Remote Sensing ◽  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Remote Sensing Data ◽  
Great Depth ◽  
Wet Season ◽  
Daily Cycle ◽  
Convective Boundary ◽  
In Situ Observations

In the present study, the evolution the diurnal cycle of planetary boundary layer in the wet season at Amazon region during a period of intense observations carried out in the GOAmazon Project 2014/2015 (Green Ocean Amazon).The analysis includes radiosonde and remote sensing data. In general case, the results of the daily cycle in the wet season indicate a Nocturnal boundary layer with a small oscillation in its depth and with a tardy erosion. The convective boundary layer did not present great depth, responding to the low values of sensible heat of the wet season. A comparison between the different techniques(in situ observations and remote sensing)  for estimating the planetary boundary layer is also presented.

scholarly journals A snow cover climatology for the Pyrenees from MODIS snow products

2014 ◽  
Vol 11 (11) ◽  
pp. 12531-12571 ◽  
Author(s):  
S. Gascoin ◽  
O. Hagolle ◽  
M. Huc ◽  
L. Jarlan ◽  
J.-F. Dejoux ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Snow Cover ◽  
Snow Water Equivalent ◽  
Remote Sensing Data ◽  
Landsat Images ◽  
Forested Areas ◽  
Land Cover Map ◽  
Hydropower Production ◽  
Snow Cover Duration

Abstract. The seasonal snow in the Pyrenees is critical for hydropower production, crop irrigation and tourism in France, Spain and Andorra. Complementary to in situ observations, satellite remote sensing is useful to monitor the effect of climate on the snow dynamics. The MODIS daily snow products (Terra/MOD10A1 and Aqua/MYD10A1) are widely used to generate snow cover climatologies, yet it is preferable to assess their accuracies prior to their use. Here, we use both in situ snow observations and remote sensing data to evaluate the MODIS snow products in the Pyrenees. First, we compare the MODIS products to in situ snow depth (SD) and snow water equivalent (SWE) measurements. We estimate the values of the SWE and SD best detection thresholds to 40 mm water equivalent (we) and 105 mm respectively, for both MOD10A1 and MYD10A1. Kappa coefficients are within 0.74 and 0.92 depending on the product and the variable. Then, a set of Landsat images is used to validate MOD10A1 and MYD10A1 for 157 dates between 2002 and 2010. The resulting accuracies are 97% (κ = 0.85) for MOD10A1 and 96% (κ = 0.81) for MYD10A1, which indicates a good agreement between both datasets. The effect of vegetation on the results is analyzed by filtering the forested areas using a land cover map. As expected, the accuracies decreases over the forests but the agreement remains acceptable (MOD10A1: 96%, κ = 0.77; MYD10A1: 95%, κ = 0.67). We conclude that MODIS snow products have a sufficient accuracy for hydroclimate studies at the scale of the Pyrenees range. Using a gapfilling algorithm we generate a consistent snow cover climatology, which allows us to compute the mean monthly snow cover duration per elevation band. We finally analyze the snow patterns for the atypical winter 2011–2012. Snow cover duration anomalies reveal a deficient snowpack on the Spanish side of the Pyrenees, which seems to have caused a drop in the national hydropower production.

Cloud-based Research Data Infrastructures Integrating In-Situ and Remote Sensing Data

2021 ◽  
Author(s):  
Simon Jirka ◽  
Benedikt Gräler ◽  
Matthes Rieke ◽  
Christian Autermann
Keyword(s):  
Remote Sensing ◽  
Remote Sensing Data ◽  
Research Data ◽  
Monitoring Networks ◽  
Sensing Data ◽  
Data Infrastructures ◽  
Practical Experiences ◽  
The One ◽  
Cloud Infrastructures

&lt;p&gt;For many scientific domains such as hydrology, ocean sciences, geophysics and social sciences, geospatial observations are an important source of information. Scientists conduct extensive measurement campaigns or operate comprehensive monitoring networks to collect data that helps to understand and to model current and past states of complex environment. The variety of data underpinning research stretches from in-situ observations to remote sensing data (e.g., from the European Copernicus programme) and contributes to rapidly increasing large volumes of geospatial data.&lt;/p&gt;&lt;p&gt;However, with the growing amount of available data, new challenges arise. Within our contribution, we will focus on two specific aspects: On the one hand, we will discuss the specific challenges which result from the large volumes of remote sensing data that have become available for answering scientific questions. For this purpose, we will share practical experiences with the use of cloud infrastructures such as the German platform CODE-DE and will discuss concepts that enable data processing close to the data stores. On the other hand, we will look into the question of interoperability in order to facilitate the integration and collaborative use of data from different sources. For this aspect, we will give special consideration to the currently emerging new generation of standards of the Open Geospatial Consortium (OGC) and will discuss how specifications such as the OGC API for Processes can help to provide flexible processing capabilities directly within Cloud-based research data infrastructures.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document