scholarly journals 3D-printed thermoplastic polyurethane for wearable breast hyperthermia

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yusuke Mukai ◽  
Sixian Li ◽  
Minyoung Suh
Keyword(s):  
Dielectric Properties ◽  
Thermoplastic Polyurethane ◽  
Volume Percentage ◽  
Conformal Antennas ◽  
Translational Study ◽  
Wearable Antennas ◽  
Full Wave ◽  
Classic Theory ◽  
3D Printed ◽  
Flexible Antenna

AbstractMicrowave breast hyperthermia is a class of cancer treatment, where breast temperature is elevated by a focused electromagnetic (EM) radiation to impair cancer cells. While the current mainstream in microwave breast hyperthermia is centered on bulky and rigid systems, wearable antennas would offer considerable benefits such as superior conformity to individual patient anatomy and better comfort. In this proposition, this paper presents 3D-printed flexible antenna prototypes for wearable breast hyperthermia applications. Since the dielectric properties are expected to dominate the antenna gain but could be influenced by the solid volume percentage, this work first investigates the relationship between the dielectric properties and solid volume percentage of a 3D-printed flexible filament. From this, it is found that with decrease in the solid volume percentage, the dielectric constant decreases following the classic theory of dielectric mixture. Based on this observation, optimal antennas are designed for substrates in different infill levels by running a 3D full-wave EM simulator and fabricated by 3D printing a polyurethane filament. Temperature elevations in a synthetic breast tissue are measured by a thermometer and are ~ 5.5 °C and ~ 3.2 °C at the 5 mm- and 7 mm-deep locations, respectively. The infill percentage makes little difference in the heating efficacy. Based on these findings, this translational study sheds light on the possibility of wearable breast hyperthermia with the 3D-printed flexible and conformal antennas.

Physical property of 3D-printed sinusoidal pattern using shape memory TPU filament

2020 ◽  
Vol 90 (21-22) ◽  
pp. 2399-2410 ◽  
Author(s):  
Shahbaj Kabir ◽  
Hyelim Kim ◽  
Sunhee Lee
Keyword(s):  
Mechanical Properties ◽  
Tensile Test ◽  
Shape Memory ◽  
Fused Deposition Modeling ◽  
Loss Modulus ◽  
Thermoplastic Polyurethane ◽  
Heating Process ◽  
Fused Deposition ◽  
3D Printed ◽  
Sinusoidal Pattern

This study has investigated the physical properties of 3D-printable shape memory thermoplastic polyurethane (SMTPU) filament and its 3D-printed sinusoidal pattern obtained by fused deposition modeling (FDM) technology. To investigate 3D filaments, thermoplastic polyurethane (TPU) and SMTPU filament were examined by conducting infrared spectroscopy, x-ray diffraction (XRD), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and a tensile test. Then, to examine the 3D-printed sinusoidal samples, a sinusoidal pattern was developed and 3D-printed. Those samples went through a three-step heating process: (a) untreated state; (b) 5 min heating at 70°C, cooling for 30 min at room temperature; and (c) a repeat of step 2. The results obtained by the three different heating processes of the 3D-printed sinusoidal samples were examined by XRD, DMTA, DSC and the tensile test to obtain the effect of heating or annealing on the structural and mechanical properties. The results show significant changes in structure, crystallinity and thermal and mechanical properties of SMTPU 3D-printed samples due to the heating steps. XRD showed the increase in crystallinity with heating. In DMTA, storage modulus, loss modulus and the tan σ peak position also changed for various heating steps. The DSC result showed that the Tg for different steps of the SMTPU 3D-printed sample remained almost the same at around 51°C. The tensile property of the TPU 3D-printed sinusoidal sample decreased in terms of both load and elongation with increased heating processes, while for the SMTPU 3D-printed sinusoidal sample, the load decreased but elongation increased about 2.5 times.

scholarly journals Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities

2019 ◽  
Vol 162 ◽  
pp. 130-142 ◽  
Author(s):  
Simon R.G. Bates ◽  
Ian R. Farrow ◽  
Richard S. Trask
Keyword(s):  
Thermoplastic Polyurethane ◽  
Compressive Behaviour ◽  
3D Printed

scholarly journals 3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties

2017 ◽  
Vol 5 (47) ◽  
pp. 12430-12440 ◽  
Author(s):  
N. Phatharapeetranun ◽  
B. Ksapabutr ◽  
D. Marani ◽  
J. R. Bowen ◽  
V. Esposito
Keyword(s):  
Dielectric Properties ◽  
Barium Titanate ◽  
Vinylidene Fluoride ◽  
Anisotropic Dielectric ◽  
Poly Vinylidene Fluoride ◽  
3D Printed ◽  
Dielectric Devices

“3D-printed” anisotropy BTNFs/PVDF nanohybrids are successfully fabricated by the FDM technique which is attractive for developing novel functionalities in dielectric devices.

scholarly journals DESIGN OF A 3D-PRINTED THREE-CLAW ROBOTIC GRIPPER END-EFFECTOR

2021 ◽  
Vol 11 (4) ◽  
pp. 70-79
Author(s):  
Dino Dominic Forte Ligutan ◽  
Argel Alejandro Bandala ◽  
Jason Limon Española ◽  
Richard Josiah Calayag Tan Ai ◽  
Ryan Rhay Ponce Vicerra ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Grip Force ◽  
Thermoplastic Polyurethane ◽  
Robotic Arm ◽  
End Effector ◽  
Design Considerations ◽  
3D Printed ◽  
Materials Used ◽  
Metal Work

The development of a novel 3D-printed three-claw robotic gripper shall be described in this paper with the goal of incorporating various design considerations. Such considerations include the grip reliability and stability, grip force maximization, wide object grasping capability. Modularization of its components is another consideration that allows its parts to be easily machined and reusable. The design was realized by 3D printing using a combination of tough polylactic acid (PLA) material and thermoplastic polyurethane (TPU) material. In practice, additional tolerances were also considered for 3D printing of materials to compensate for possible expansion or shrinkage of the materials used to achieve the required functionality. The aim of the study is to explore the design and eventually deploy the three-claw robotic gripper to an actual robotic arm once its metal work fabrication is finished.

scholarly journals EXPERIMENTAL INVESTIGATION AND SIMULATION OF 3D-PRINTED LATTICE STRUCTURES

2019 ◽  
Vol 25 ◽  
pp. 52-57
Author(s):  
Eva Heiml ◽  
Anna Kalteis ◽  
Zoltan Major
Keyword(s):  
Mechanical Performance ◽  
Bulk Material ◽  
Deformation Behaviour ◽  
Lightweight Design ◽  
Thermoplastic Polyurethane ◽  
Selective Laser Sintering ◽  
Structural Performance ◽  
Lattice Structures ◽  
3D Printed ◽  
Manufacturing Techniques

Lattice structures are currently of high interest, especially for lightweight design. They generally have better structural performance per weight than parts made of bulk material. With conventional manufacturing techniques they are difficult to produce, but with additive manufacturing (AM) fabricationisfeasible. To better understand their behaviour under various loading conditions two lattice structures in different configurations were observed. For each structure three different test specimens were designed and manufactured using selective laser sintering (SLS). To investigate the mechanical performance under large deformations the specimens were made of a thermoplastic polyurethane(TPU), which shows a hyperelastic material behaviour. Beside the experimental observations also finite element analyses (FEA) were conducted to investigate the deformation behaviour in more detail.

A Dual-Band Flexible Wearable Antenna Integrated on a Smart Watch for 5G Applications

2020 ◽  
pp. 77-101
Author(s):  
Mohamed Ismail Ahmed ◽  
Mai Fouad Ahmed
Keyword(s):  
Dielectric Properties ◽  
Textile Material ◽  
Dual Band ◽  
60 Ghz ◽  
Specific Absorption ◽  
Absorption Ratio ◽  
Wearable Antenna ◽  
Wearable Antennas ◽  
Flexible Material ◽  
Smart Watch

This chapter focuses on the design of dual band flexible wearable antennas for modern 5G applications to integrate on a smartwatch. The first is a rectangular antenna which the patch and the ground etched on new flexible material is called ULTRALAM® 3850HT. This antenna is designed to operate at 38 GHz and 60 GHz. The second is a planar inverted-2F wearable antenna pasted on a jeans textile material. Two methods for measuring the dielectric properties of the jeans will be presented. This antenna is designed to operate at 28 GHz and 38 GHz. The SAR (specific absorption ratio) is also introduced and SAR results will be shown. Moreover, the proposed smartwatch under the bent condition will be also studied. These antennas are simulated using HFSS and CST 2018.

scholarly journals Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2034 ◽  
Author(s):  
Tomasz Kozior ◽  
Al Mamun ◽  
Marah Trabelsi ◽  
Martin Wortmann ◽  
Sabantina Lilia ◽  
...  
Keyword(s):  
3D Printing ◽  
Thermoplastic Polyurethane ◽  
High Surface ◽  
Antimicrobial Properties ◽  
Mechanical Damage ◽  
Volume Ratio ◽  
Electrospun Nanofiber ◽  
Polymer Nanofiber ◽  
3D Printed ◽  
Nanofiber Mats

Electrospinning is a frequently used method to prepare air and water filters. Electrospun nanofiber mats can have very small pores, allowing for filtering of even the smallest particles or molecules. In addition, their high surface-to-volume ratio allows for the integration of materials which may additionally treat the filtered material through photo-degradation, possess antimicrobial properties, etc., thus enhancing their applicability. However, the fine nanofiber mats are prone to mechanical damage. Possible solutions include reinforcement by embedding them in composites or gluing them onto layers that are more mechanically stable. In a previous study, we showed that it is generally possible to stabilize electrospun nanofiber mats by 3D printing rigid polymer layers onto them. Since this procedure is not technically easy and needs some experience to avoid delamination as well as damaging the nanofiber mat by the hot nozzle, here we report on the reversed technique (i.e., first 3D printing a rigid scaffold and subsequently electrospinning the nanofiber mat on top of it). We show that, although the adhesion between both materials is insufficient in the case of a common rigid printing polymer, nanofiber mats show strong adhesion to 3D printed scaffolds from thermoplastic polyurethane (TPU). This paves the way to a second approach of combining 3D printing and electrospinning in order to prepare mechanically stable filters with a nanofibrous surface.

Sign in / Sign up

Export Citation Format

Share Document