scholarly journals Custom-made 3D printed subperiosteal titanium implants for the prosthetic restoration of the atrophic posterior mandible of elderly patients: a case series

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Carlo Mangano ◽  
Andrea Bianchi ◽  
Francesco Guido Mangano ◽  
Jessica Dana ◽  
Marco Colombo ◽  
...  
Keyword(s):  
Elderly Patients ◽  
Survival Rates ◽  
Case Series ◽  
Late Complications ◽  
Titanium Implants ◽  
High Survival ◽  
Custom Made ◽  
3D Printed ◽  
Edentulous Patients

Abstract Purpose To present the application of custom-made 3D-printed subperiosteal implants for fixed prosthetic restoration of the atrophic posterior mandible of elderly patients. Methods Between January 2017 and June 2018, all partially edentulous patients aged over 65 years, with two or more missing teeth in the posterior atrophic mandible, and who did not want to undergo bone regenerative procedures, were included in this study. These patients were rehabilitated with custom-made subperiosteal implants, designed from cone beam computed tomography (CBCT) and fabricated in titanium by means of direct metal laser sintering (DMLS). The outcome measures were fit and stability of the implants at placement, duration of the intervention, implant survival, and early and late complications. All patients were followed for 1 year after surgery. Results Ten patients (four males, six females; mean age 69.6, SD ± 2.8, median 69, 95% CI 67.9–71.6) were included in the study. The fit of the implants was satisfactory, with a mean rating of 7 out of 10 (SD ± 1.6, median 7, 95% CI 6–8). Only two implants had insufficient fit, because of the presence of scattering in the CBCT; however, they were adapted to the sites during the interventions. The mean duration of the intervention was 44.3 min (SD ± 19.4, median 37, 95% CI 32.3–56.3). At the one-year follow-up, no implants were lost (survival rate 100%). One implant presented immediate postoperative complications with pain, discomfort and swelling, and two patients experienced late complications, having their provisional restorations fractured during the temporisation phase. All these complications were minor in nature, but the final complication rate amounted to 30% (three of ten patients). Conclusions Although this study has limits (small patient sample and short follow-up), DMLS has proven to be an effective method for fabricating accurate subperiosteal implants, with high survival rates. This may represent an alternative treatment procedure in elderly patients with a severely atrophic posterior mandible, since it allows avoidance of regenerative bone therapies. Further studies are needed to confirm these outcomes.

Evaluation of the Treatment of Partially Edentulous Patients With Bone Level Tapered Implants: 24-Month Clinical and Radiographic Follow-Up

2020 ◽  
Vol 46 (4) ◽  
pp. 407-413 ◽  
Author(s):  
Leon Pariente ◽  
Karim Dada ◽  
Marwan Daas ◽  
Susy Linder ◽  
Michel Dard
Keyword(s):  
Survival Rates ◽  
Case Series ◽  
Insertion Torque ◽  
High Survival ◽  
Radiographic Outcomes ◽  
Radiographic Measurements ◽  
Posterior Maxilla ◽  
Bone Level ◽  
Edentulous Patients

The aim of this case series was to assess, over a period of 24 months, the clinical and radiographic outcomes in partially edentulous patients receiving bone-level tapered implants. In total, 33 partially edentulous patients and 50 implants were evaluated. Patients received single or multiple implants in the posterior maxilla. Clinical and radiographic measurements of vertical bone levels were assessed at surgery, at loading, and 6, 12, and 24 months after surgery. The success and survival rates of the implants were also evaluated. Within the 24-month follow-up, only 1 implant failed (2.0%). Other biological or technical complications were not observed. The mean insertion torque was 34 ± 5.3 Ncm. Bone-level changes of 0.35 ± 0.23 mm were found between surgery and 12 months after surgery, and changes of 0.03 ± 0.05 mm were found between 12 months and 24 months after surgery. The overall change from surgery to 24 months after implant placement was 0.38 ± 0.24 mm. Most of the bone loss occurred between surgery and 3 months (0.28 ± 0.19 mm; P < .001); thereafter, the loss was minimal and statistically nonsignificant. Bone-level tapered implants yielded a high survival and success rate with minimal bone-level changes. Tapered implants could be considered as a predictable treatment option for partially edentulous patients with different types of bone qualities and loading protocols.

Use of Patient-Specific 3D-Printed Titanium Implants for Complex Foot and Ankle Limb Salvage, Deformity Correction, and Arthrodesis Procedures

2018 ◽  
Vol 39 (8) ◽  
pp. 916-921 ◽  
Author(s):  
Travis J. Dekker ◽  
John R. Steele ◽  
Andrew E. Federer ◽  
Kamran S. Hamid ◽  
Samuel B. Adams
Keyword(s):  
Clinical Success ◽  
Case Series ◽  
Deformity Correction ◽  
Clinical Success Rate ◽  
Titanium Implants ◽  
Patient Specific ◽  
Foot And Ankle ◽  
Level Of Evidence ◽  
3D Printed

Background: The advancement of 3D printing technology has allowed for the use of custom-designed implants for difficult-to-treat foot and ankle pathologies. This study reports on the radiographic and functional outcomes of a case series of patients treated with patient-specific 3D-printed titanium implants. Methods: Fifteen consecutive patients treated with custom-designed 3D-printed implant cages for severe bone loss, deformity correction, and/or arthrodesis procedures were included in this study. A minimum of 1 year of clinical and radiographic follow-up was required. No patients were lost to follow-up. Patients completed a visual analog scale for pain, the Foot and Ankle Ability Measure Activities of Daily Living score, and the American Orthopaedic Foot & Ankle Society Score outcomes questionnaires preoperatively and at most recent follow-up. All patients had postoperative radiographs and computed tomography (CT) scans to assess bony incorporation. The mean age was 53.3 years (range, 22-74 years) with a mean follow-up of 22 months (range, 12-48 months) for these 15 patients. Results: Radiographic fusion verified by CT scan occurred in 13 of 15 patients. There was significant improvement in pain and all functional outcome score measures. All patients who went on to fusion were satisfied with their surgery. There were 2 failures, consisting of 1 infection and 1 nonunion, with an overall clinical success rate of 87%. Conclusion: These patients demonstrated the successful use of patient-specific 3D-printed titanium implants to treat complex large bony defects, deformities, and arthrodesis procedures. These implants offer surgeons a novel and promising approach to treat both lower extremity pain and deformity that is not always available with current techniques. Level of Evidence: Level IV, retrospective case series.

Short-term findings of a custom-made 3D-printed titanium partial scaphoid prosthesis and scapholunate interosseous ligament reconstruction

2021 ◽  
Vol 14 (7) ◽  
pp. e241090
Author(s):  
Mario Igor Rossello
Keyword(s):  
Titanium Implant ◽  
Titanium Implants ◽  
Proximal Pole ◽  
Short Term ◽  
Interosseous Ligament ◽  
Non Union ◽  
Radiographic Outcomes ◽  
Custom Made ◽  
3D Printed

Following wrist trauma due to a karate accident, an 18-year-old male patient developed non-union of the scaphoid with proximal pole necrosis and significant scapholunate gap from an evident scapholunate interosseous ligament (SLIL) injury. A custom-made 3D-printed titanium implant was used for scaphoid replacement and SLIL reconstruction. Good clinical and radiographic outcomes were observed at his 2-year follow-up. Custom-made 3D-printed titanium implants are thought to provide a surgical solution for patients requiring site-specific scaphoid replacement while allowing the reconstruction of the scapholunate ligament.

scholarly journals Cognitive decline in patients with prostate cancer: study protocol of a prospective cohort, NEON-PC

BMJ Open ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. e043844
Author(s):  
Natalia Araujo ◽  
Samantha Morais ◽  
Ana Rute Costa ◽  
Raquel Braga ◽  
Ana Filipa Carneiro ◽  
...  
Keyword(s):  
Prostate Cancer ◽  
Cognitive Decline ◽  
Cognitive Performance ◽  
Androgen Deprivation Therapy ◽  
Survival Rates ◽  
Cardiovascular Complications ◽  
Androgen Deprivation ◽  
High Survival ◽  
The Impact

IntroductionProstate cancer is the most prevalent oncological disease among men in industrialised countries. Despite the high survival rates, treatments are often associated with adverse effects, including metabolic and cardiovascular complications, sexual dysfunction and, to a lesser extent, cognitive decline. This study was primarily designed to evaluate the trajectories of cognitive performance in patients with prostate cancer, and to quantify the impact of the disease and its treatments on the occurrence of cognitive decline.MethodsParticipants will be recruited from two main hospitals providing care to approximately half of the patients with prostate cancer in Northern Portugal (Portuguese Institute of Oncology of Porto and São João Hospital Centre), and will comprise a cohort of recently diagnosed patients with prostate cancer proposed for different treatment plans, including: (1) radical prostatectomy; (2) brachytherapy and/or radiotherapy; (3) radiotherapy in combination with androgen deprivation therapy and (4) androgen deprivation therapy (with or without chemotherapy). Recruitment began in February 2018 and is expected to continue until the first semester of 2021. Follow-up evaluations will be conducted at 1, 3, 5, 7 and 10 years. Sociodemographic, behavioural and clinical characteristics, anxiety and depression, health literacy, health status, quality of life, and sleep quality will be assessed. Blood pressure and anthropometrics will be measured, and a fasting blood sample will be collected. Participants’ cognitive performance will be evaluated before treatments and throughout follow-up (Montreal Cognitive Assessment and Cube Test as well as Brain on Track for remote monitoring). All participants suspected of cognitive impairment will undergo neuropsychological tests and clinical observation by a neurologist.Ethics and disseminationThe study was approved by the Ethics Committee of the hospitals involved. All participants will provide written informed consent, and study procedures will be developed to ensure data protection and confidentiality. Results will be disseminated through publication in peer-reviewed journals and presentation in scientific meetings.

scholarly journals Single tooth restoration in the maxillary esthetic zone using a one-piece ceramic implant with 1 year of follow-up: case series

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Miren Vilor-Fernández ◽  
Ana-María García-De-La-Fuente ◽  
Xabier Marichalar-Mendia ◽  
Ruth Estefanía-Fresco ◽  
Luis-Antonio Aguirre-Zorzano
Keyword(s):  
Case Series ◽  
Biological Properties ◽  
Titanium Implants ◽  
Plaque Index ◽  
Marginal Bone Loss ◽  
Bleeding On Probing ◽  
Probing Depth ◽  
Zirconia Implants ◽  
Ceramic Implant

Abstract Background Oral implants have helped clinicians to improve the quality of life for many patients. The material of choice for dental implants currently remains titanium type IV, whose mechanical and biological properties have been proven throughout the history of implantology. Yet, this material is not exempt from complications. For these reasons, ceramic alternatives to titanium have emerged. Thus, the purpose of this study is to evaluate peri-implant hard and soft tissue stability with the use of a one-piece ceramic implant (Straumann® PURE Ceramic Implant) during 1 year of follow-up. Study design One-piece all-ceramic zirconia (ZrO2) implants were placed to replace single missing teeth in the esthetic zone. Six to 8 weeks after the procedure, the definitive prosthesis was fabricated. At the time of prosthesis, placement (T0) photographs and periapical radiographs were taken, and the following clinical parameters were recorded: probing depth (PD), plaque index (PI), bleeding on probing (BOP), suppuration on probing (SOP), distance from gingival margin to incisal edge (GM-IE), and Jemt papilla index (JPI). Follow-up appointments were scheduled at 4 (T4), 8 (T8), and 12 (T12) months, when the same parameters were recorded. In addition, plaque control was reinforced and prophylaxis was carried out. In this last appointment, a final periapical radiograph was taken to assess marginal bone loss. Results A total of 32 zirconia implants were placed in 28 patients (16 women and 12 men, aged between 34 and 67 years). The survival and success rate were 96.9%. The increase in probing depth from baseline to 12 months was 0.78 mm. Assessments of plaque index and bleeding on probing showed a slight increase throughout the study. Conclusions The results obtained with the Straumann® PURE Ceramic implants show them to exhibit very good clinical behavior. The survival rate of the implants of our pilot study was 96.9%. For these reasons, we can say that zirconia implants could be an alternative to titanium implants in the esthetic zone.

scholarly journals Recurrent contracted sockets treated with personalized, three-dimensionally printed conformers and buccal grafts

2021 ◽  
pp. 112067212110000
Author(s):  
Annabel LW Groot ◽  
Jelmer S Remmers ◽  
Roel JHM Kloos ◽  
Peerooz Saeed ◽  
Dyonne T Hartong
Keyword(s):  
Three Dimensional ◽  
Case Series ◽  
Secondary Outcome ◽  
Retrospective Case ◽  
Upper Eyelid ◽  
Ocular Prosthesis ◽  
Buccal Mucosal Graft ◽  
Custom Made ◽  
3D Printed

Purpose: Recurrent contracted sockets are complex situations where previous surgeries have failed, disabling the wear of an ocular prosthesis. A combined method of surgery and long-term fixation using custom-made, three-dimensional (3D) printed conformers is evaluated. Methods: Retrospective case series of nine patients with recurrent excessive socket contraction and inability to wear a prosthesis, caused by chemical burns ( n = 3), fireworks ( n = 3), trauma ( n = 2) and enucleation and radiotherapy at childhood due to optic nerve glioma ( n = 1) with three average previous socket surgeries (range 2–6). Treatment consisted of a buccal mucosal graft and personalized 3D-printed conformer designed to be fixated to the periosteum and tarsal plates for minimal 2 months. Primary outcome was the retention of an ocular prosthesis. Secondary outcome was the need for additional surgeries. Results: Outcomes were measured at final follow-up between 7 and 36 months postoperatively (mean 20 months). Eight cases were able to wear an ocular prosthesis after 2 months. Three cases initially treated for only the upper or only the lower fornix needed subsequent surgery for the opposite fornix for functional reasons. Two cases had later surgery for cosmetic improvement of upper eyelid position. Despite pre-existing lid abnormalities (scar, entropion, lash deficiency), cosmetic outcome was judged highly acceptable in six cases because of symmetric contour and volume, and reasonably acceptable in the remaining two. Conclusions: Buccal mucosal transplant fixated with a personalized 3D-designed conformer enables retention of a well-fitted ocular prosthesis in previously failed socket surgeries. Initial treatment of both upper and lower fornices is recommended to avoid subsequent surgeries for functional reasons.

scholarly journals Survival Rate of 1008 Short Dental Implants with 21 Months of Average Follow-Up: A Retrospective Study

2020 ◽  
Vol 9 (12) ◽  
pp. 3943
Author(s):  
João Caramês ◽  
Ana Catarina Pinto ◽  
Gonçalo Caramês ◽  
Helena Francisco ◽  
Joana Fialho ◽  
...  
Keyword(s):  
Retrospective Study ◽  
Survival Rate ◽  
Dental Implants ◽  
Cox Regression ◽  
Survival Rates ◽  
High Survival ◽  
Implant Survival ◽  
Posterior Maxilla ◽  
Clinical Records

This retrospective study evaluated the survival rate of short, sandblasted acid-etched surfaced implants with 6 and 8 mm lengths with at least 120 days of follow-up. Data concerning patient, implant and surgery characteristics were retrieved from clinical records. Sandblasted and acid-etched (SLA)-surfaced tissue-level 6 mm (TL6) or 8 mm (TL8) implants or bone-level tapered 8 mm (BLT8) implants were used. Absolute and relative frequency distributions were calculated for qualitative variables and mean values and standard deviations for quantitative variables. A Cox regression model was performed to verify whether type, length and/or width influence the implant survival. The cumulative implant survival rate was assessed by time-to-event analyses (Kaplan–Meier estimator). In all, 513 patients with a mean age of 58.00 ± 12.44 years received 1008 dental implants with a mean follow-up of 21.57 ± 10.77 months. Most implants (78.17%) presented a 4.1 mm diameter, and the most frequent indication was a partially edentulous arch (44.15%). The most frequent locations were the posterior mandible (53.97%) and the posterior maxilla (31.55%). No significant differences were found in survival rates between groups of type, length and width of implant with the cumulative rate being 97.7% ± 0.5%. Within the limitations of this study, the evaluated short implants are a predictable option with high survival rates during the follow-up without statistical differences between the appraised types, lengths and widths.

scholarly journals Custom-Made 3D-Printed Implants as Novel Approach to Reconstructive Surgery after Oncologic Resection in Pediatric Patients

2021 ◽  
Vol 10 (5) ◽  
pp. 1056
Author(s):  
Giovanni Beltrami ◽  
Gabriele Ristori ◽  
Anna Maria Nucci ◽  
Alberto Galeotti ◽  
Angela Tamburini ◽  
...  
Keyword(s):  
Pediatric Patients ◽  
Soft Tissues ◽  
Lower Limbs ◽  
Host Bone ◽  
Limb Salvage Surgery ◽  
Musculoskeletal Tumor ◽  
Musculoskeletal Tumor Society ◽  
Custom Made ◽  
3D Printed

Recently, custom-made 3D-printed prostheses have been introduced for limb salvage surgery in adult patients, but their use has not been described in pediatric patients. A series of 11 pediatric patients (mean age 10.8 years; range 2–13) with skeletal tumors treated with custom-made implants for the reconstruction of bony defects is described. Patients were followed up every 3 months. Functional results were evaluated by the Musculoskeletal Tumor Society Score (MSTS) for upper and lower limbs. The mean follow-up was 25.7 months (range 14–44). Three patients died after a mean of 19.3 months postoperatively—two because of disease progression and the other from a previous malignancy. Three patients experienced complications related to soft tissues. One patient required device removal, debridement, and antibiotic pearls for postoperative infection. Partial osseointegration between grafts and host bone was observed within a mean of 4 months. At the final follow-up, mean MSTS score was 75%. 3D prostheses may yield biological advantages due to possible integration with the host bone and also through the use of vascularized flaps. Further research is warranted.

Abstract 2130: Long-term Outcomes of Adult Atrial Septal Defect With Severe Pulmonary Hypertension After Surgical Closure

Circulation ◽  
2007 ◽  
Vol 116 (suppl_16) ◽  
Author(s):  
Jeong-Hoon Kim ◽  
Duk-Hyun Kang ◽  
Jong-Young Lee ◽  
Jong-Min Song ◽  
Tae-Jin Yun ◽  
...  
Keyword(s):  
Pulmonary Hypertension ◽  
Elderly Patients ◽  
Atrial Septal Defect ◽  
Septal Defect ◽  
Survival Rates ◽  
Severe Pulmonary Hypertension ◽  
Term Survival ◽  
Surgical Closure

The benefits of surgical closure has been unclear in adult atrial septal defect (ASD) with severe pulmonary hypertension (PHT), and we tried to evaluate improvement of PHT and long-term survival after surgical closure compared to medical follow-up. Methods: From 1996 to 2006, we included a total of 71 adult ASD patients (age; 43±15 years) with severe PHT documented by echocardiography. The inclusion criteria were defined as ASD diameter > 15 mm, enlarged right ventricle, and the baseline peak velocity of tricuspid regurgitation (TR) ≥ 4.0 m/sec. We excluded 5 patients with Eisenmenger syndrome documented by cardiac catheterization. Surgical closure was performed on 55 patients (OP group) and the remaining 16 patients were followed up medically (MED group). The improvement of PHT was defined as TR velocity ≤ 3.5 m/sec on follow-up echo. Results: Baseline characteristics and clinical results were compared between the two groups in table . There were no significant differences in terms of gender, ASD diameter, cardiac rhythm, and TR velocity, but the MED group was significantly older. During follow-up of 46±33 months, there were 5 deaths in the MED group and no operative or late death in the OP group, and the 5-year actuarial survival rate of the OP group was significantly higher than the MED group (58±15%, p<0.05). On subgroup analysis according to age, the OP group showed significantly better survival rates than the MED group (p<0.05) in elderly patients (age > 50). In the OP group, TR velocity was significantly decreased from 4.5±0.4 to 3.0±0.7 m/sec on follow-up echo, and improvement of PHT was observed in 47 (85%) patients. On multivariate analysis, female gender and lower baseline TR velocity were the significant independent predictors of improved PHT after surgery. Conclusions: In adult ASD with severe PHT, surgical closure can be safely performed and improve PHT effectively. Especially in elderly patients, ASD closure is significantly related with the better survival rates.

Sign in / Sign up

Export Citation Format

Share Document