ELECTRICAL ANALOG APPROACH TO DIPMETER COMPUTATION

Geophysics ◽  
1960 ◽  
Vol 25 (4) ◽  
pp. 928-938 ◽  
Author(s):  
T. H. Braun ◽  
G. Y. Wheatley
Keyword(s):  
Accurate Information ◽  
Electrical Analog ◽  
Considerable Saving ◽  
Drilling Operation ◽  
Analog Approach ◽  
Analog Instrument

An electrical analog instrument has been developed to calculate dip and strike from continuous dipmeter logs. The particular model described is designed specifically for the Schlumberger CDM-P, or Poteclinometer, logs and it can be used with hole deviations of up to 36 degrees. Every control on this instrument corresponds to one of the recorded parameters of the dipmeter log. It is thus easy to see the effect of any one parameter on the resolved dip and strike. The instrument is portable and can therefore be used at the well site, if necessary, to make on‐the‐spot decisions regarding further drilling operation after a dipmeter log has been run. No elaborate training in procedure is required. The rapidity with which the computations can be made also permits a larger number of levels to be computed. This frequently results in more accurate information and a considerable saving in computation expense.

Stopping-power determination for compound by EELS

1994 ◽  
Vol 52 ◽  
pp. 948-949 ◽  
Author(s):  
David C. Joy ◽  
Suichu Luo ◽  
John R. Dunlap ◽  
Dick Williams ◽  
Siqi Cao
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Electron Energy Loss Spectroscopy ◽  
Materials Science ◽  
Average Energy ◽  
Stopping Power ◽  
Accurate Information ◽  
Power Calculation ◽  
Coulomb Collisions ◽  
Electron Energy Loss

In Physics, Chemistry, Materials Science, Biology and Medicine, it is very important to have accurate information about the stopping power of various media for electrons, that is the average energy loss per unit pathlength due to inelastic Coulomb collisions with atomic electrons of the specimen along their trajectories. Techniques such as photoemission spectroscopy, Auger electron spectroscopy, and electron energy loss spectroscopy have been used in the measurements of electron-solid interaction. In this paper we present a comprehensive technique which combines experimental and theoretical work to determine the electron stopping power for various materials by electron energy loss spectroscopy (EELS ). As an example, we measured stopping power for Si, C, and their compound SiC. The method, results and discussion are described briefly as below.The stopping power calculation is based on the modified Bethe formula at low energy:where Neff and Ieff are the effective values of the mean ionization potential, and the number of electrons participating in the process respectively. Neff and Ieff can be obtained from the sum rule relations as we discussed before3 using the energy loss function Im(−1/ε).

Applications of SEM/EDXA in cement clinker investigation

1990 ◽  
Vol 48 (4) ◽  
pp. 870-871
Author(s):  
Arezki Tagnit-Hamou ◽  
Shondeep L. Sarkar
Keyword(s):  
Mineralogical Composition ◽  
Physicochemical Characteristics ◽  
Cement Clinker ◽  
Accurate Information ◽  
Phase Identification ◽  
History Of ◽  
Bulk Chemical ◽  
Resolution Imaging ◽  
Proven Method ◽  
Instantaneous Chemical

All the desired properties of cement primarily depend on the physicochemical characteristics of clinker from which the cement is produced. The mineralogical composition of the clinker forms the most important parameter influencing these properties.Optical microscopy provides reasonably accurate information pertaining to the thermal history of the clinker, while XRDA still remains the proven method of phase identification, and bulk chemical composition of the clinker can be readily obtained from XRFA. Nevertheless, all these microanalytical techniques are somewhat limited in their applications, and SEM/EDXA combination fills this gap uniquely by virtue of its high resolution imaging capability and possibility of instantaneous chemical analysis of individual phases.Inhomogeneities and impurities in the raw meal, influence of kiln conditions such as sintering and cooling rate being directly related to the microstructure can be effectively determined by SEM/EDXA. In addition, several physical characteristics of cement, such as rhcology, grindability and hydraulicity also depend on the clinker microstructure.

Investigating the Multimodal Nature of Human Communication

2009 ◽  
Vol 23 (2) ◽  
pp. 63-76 ◽  
Author(s):  
Silke Paulmann ◽  
Sarah Jessen ◽  
Sonja A. Kotz
Keyword(s):  
Visual Information ◽  
Empirical Studies ◽  
Physical Property ◽  
Event Related Potentials ◽  
Accurate Information ◽  
Human Communication ◽  
Channel Condition ◽  
Prosodic Cues ◽  
Early Processing ◽  
Related Potentials

The multimodal nature of human communication has been well established. Yet few empirical studies have systematically examined the widely held belief that this form of perception is facilitated in comparison to unimodal or bimodal perception. In the current experiment we first explored the processing of unimodally presented facial expressions. Furthermore, auditory (prosodic and/or lexical-semantic) information was presented together with the visual information to investigate the processing of bimodal (facial and prosodic cues) and multimodal (facial, lexic, and prosodic cues) human communication. Participants engaged in an identity identification task, while event-related potentials (ERPs) were being recorded to examine early processing mechanisms as reflected in the P200 and N300 component. While the former component has repeatedly been linked to physical property stimulus processing, the latter has been linked to more evaluative “meaning-related” processing. A direct relationship between P200 and N300 amplitude and the number of information channels present was found. The multimodal-channel condition elicited the smallest amplitude in the P200 and N300 components, followed by an increased amplitude in each component for the bimodal-channel condition. The largest amplitude was observed for the unimodal condition. These data suggest that multimodal information induces clear facilitation in comparison to unimodal or bimodal information. The advantage of multimodal perception as reflected in the P200 and N300 components may thus reflect one of the mechanisms allowing for fast and accurate information processing in human communication.

Management Strategy for Distributing Questionnaires and Interview Guidelines in the Research Data Collection Process

2018 ◽  
Vol 2 (2) ◽  
pp. 104-111
Author(s):  
Po. Abas Sunarya ◽  
George Iwan Marantika ◽  
Adam Faturahman
Keyword(s):  
Focus Group ◽  
Data Collection ◽  
Management Strategy ◽  
Research Data ◽  
Accurate Information ◽  
Focus Group Interviews ◽  
Good Management ◽  
Research Activities ◽  
Data Collection Process ◽  
Group Interviews

Writing can mean lowering or describing graphic symbols that describe a languageunderstood by someone. For a researcher, management of research preparation is a veryimportant step because this step greatly determines the success or failure of all researchactivities. Before a person starts with research activities, he must make a written plan commonlyreferred to as the management of research data collection. In the process of collecting researchdata, of course we can do the management of questionnaires as well as the preparation ofinterview guidelines to disseminate and obtain accurate information. With the arrangement ofplanning and conducting interviews: the ethics of conducting interviews, the advantages anddisadvantages of interviews, the formulation of interview questions, the schedule of interviews,group and focus group interviews, interviews using recording devices, and interview bias.making a questionnaire must be designed with very good management by giving to theinformation needed, in accordance with the problem and all that does not cause problems at thestage of analysis and interpretation.

Customer Satisfaction on e-SERVQUAL in Islamic Online Banking Services

2017 ◽  
Vol 3 (2) ◽  
pp. 29
Author(s):  
NURHAZIRAH HASHIM ◽  
MOHAMMAD ZAIM MOHD SALLEH ◽  
NOR SARA NADIA MUHAMAD YUNUS ◽  
INTAN SYAFINAZ MAT SHAFIE
Keyword(s):  
Customer Satisfaction ◽  
Consumer Satisfaction ◽  
Pearson Correlation ◽  
Business Environment ◽  
Online Banking ◽  
Security And Privacy ◽  
Accurate Information ◽  
Online Services ◽  
Banking Services ◽  
Customer Information

The recent development in the ecommerce services has shown a variety of established companies participating in the web business environment including Islamic banks. Business with the mostexperience and success in using ecommerce are beginning to realize that the indicator of success or failure of the ecommerce environment was included in the online services. Nowadays, the trend ofa business is to serve the customer with best quality of services to enhance the consumer satisfaction and compete with the global competitors as online services enabled registered user to make productspurchase transaction only through website such as check and manage financial standing, transfer funds, bill payment, prepaid reload and so forth. However, in recent times, Islamic banking users faced problems with the online system such as cannot log in to the system, payment failure and  mostly security and privacy hindrance. Therefore, this study aimed to investigate the relationship between electronic service quality (e-SERVQUAL) and customer satisfaction towards IslamicOnline Banking Services users. Based on the sample size, only 76 respondents were selected to participate in this study by using a convenience sampling. Further, Pearson correlation and multipleregression were reported to analyze the mentioned relationship. The findings have shown that there is a positive relationship between e-SERVQUAL and customer satisfaction in using Islamic onlinebanking services. Based on the findings, Islamic online banking developer is recommended to improve more on their responsiveness in order to provide quick response to their customer’s requirements.  Moreover, they also should be more reliable in providing accurate information in performing the promised services. They must assure that all of their customers can quickly get responds and true feedback regarding their problems to ensure customer satisfy with service provided. Besides, the safety of the website and the protection of customer information alsoconsidered a vital action that should be concerned in order to increase the customers’ satisfaction.

ESTIMASI HASIL AIR DARI DAERAH TANGKAPAN AIR DANAU RAWA PENING DENGAN MENGGUNAKAN MODEL INVEST

2017 ◽  
Vol 19 (2) ◽  
pp. 157
Author(s):  
Nunung Puji Nugroho
Keyword(s):  
Spatial Distribution ◽  
Ecosystem Services ◽  
Water Resources ◽  
High Water ◽  
Water Yield ◽  
Accurate Information ◽  
Yield Model ◽  
Catchment Areas ◽  
Integrated Valuation ◽  
Valuation Of Ecosystem Services

<p class="JudulABSInd"><strong>ABSTRAK</strong></p><p class="abstrak">Informasi hasil air dari suatu ekosistem sangat penting dalam pengelolaan sumber daya air. Dalam perencanaan kegiatan konservasi sumber daya air, informasi sebaran spasial hasil air diperlukan untuk menentukan prioritas wilayah terkait dengan alokasi anggaran. Hasil air dari suatu ekosistem atau daerah aliran sungai (DAS) dapat diestimasi dengan menggunakan model hidrologi. Penelitian ini bertujuan untuk mendapatkan informasi tentang hasil air, baik besaran maupun sebaran spasialnya, dari daerah tangkapan air (DTA) Danau Rawa Pening. Hasil air dari lokasi penelitian dihitung dengan menggunakan model hasil air pada InVEST (<em>the Integrated Valuation of Ecosystem Services and Tradeoffs</em>), yang didasarkan pada pendekatan neraca air. Hasil perhitungan menunjukkan bahwa volume hasil air di DTA Danau Rawa Pening pada tahun 2015 adalah sekitar 337 juta m<sup>3</sup>. SubDAS Galeh, sebagai subDAS terluas, merupakan penghasil air terbesar (72,4 juta m<sup>3</sup>) diikuti oleh subDAS Sraten (66,8 juta m<sup>3</sup>) dan Parat (62,4 juta m<sup>3</sup>). Secara spasial, hasil air di lokasi kajian mempunyai nilai antara 0 hingga 29.634,19 m<sup>3</sup>/ha. Wilayah hulu dan tengah subDAS Sraten secara umum mempunyai hasil air yang lebih tinggi, sedangkan wilayah danau dan sekitarnya serta hulu subDAS Galeh mempunyai hasil air yang lebih rendah dibandingkan dengan wilayah lainnya. Wilayah dengan hasil air tinggi dapat diprioritaskan dalam kegiatan konservasi sumber daya air untuk mendukung pasokan air ke Danau Rawa Pening.</p><p><strong><em>Kata kunci</em></strong><em>: hasil air, daerah tangkapan air, model InVEST, Danau Rawa Pening</em><em></em></p><p class="judulABS"><strong>ABSTRACT</strong></p><p class="Abstrakeng">Accurate information on water yield from an ecosystem is very important in the management of water resources. In the planning of water resources conservation activities, the information on the spatial distribution of water yield is needed to determine regional priorities related to budget allocations. The water yield from an ecosystem or watershed can be estimated using a hydrological model. This study aimed to obtain information about the water yield, both the magnitude and their spatial distribution, from the catchment areas of Lake Rawa Pening. The water yield from the study area was calculated using the water yield model in InVEST (the Integrated Valuation of Ecosystem Services and Tradeoffs), which based on the water balance approach. The results indicated that the volume of water yield in Lake Rawa Pening for 2015 is approximately 337 million m<sup>3</sup>. Galeh subwatershed, as the largest subwatershed, is the largest water producer (72.4 million m<sup>3</sup>), followed by Sraten subwatershed (66.8 million m<sup>3</sup>) and Parat subwatershed (62.4 million m<sup>3</sup>). Spatially, the water yield at the study site has a value between 0 to 29,634.19 m<sup>3</sup>/ha. Upstream and middle areas of Sraten subwatershed generally have higher water yield, while the lake and its surrounding areas as well as the upstream of Galeh subwatershed have lower water yield compared to other regions. The regions with high water yield can be prioritized in water resource conservation activities to support the supply of water to Lake Rawa Pening.</p><p><strong><em>Keywords</em></strong><em>: water yield, catchment areas, InVEST model, Lake Rawa Pening</em><em></em></p>

DISSEMINATION AND USE OF INFORMATION ON CLIMATE CHANGE AND VARIABILITY: A CASE STUDY OF FARMERS IN MALUGA AND CHIBELA VILLAGES IN SEMI-ARID CENTRAL TANZANIA

Mousaion ◽  
2016 ◽  
Vol 33 (3) ◽  
pp. 1-24
Author(s):  
Emmanuel Elia ◽  
Stephen Mutula ◽  
Christine Stilwell
Keyword(s):  
Climate Change ◽  
Data Collection ◽  
Diffusion Of Innovations ◽  
Agricultural Development ◽  
Agricultural Sector ◽  
Policy Framework ◽  
Accurate Information ◽  
Adaptation To Climate Change ◽  
Climate Change And Variability ◽  
Semi Arid

This study was part of broader PhD research which investigated how access to, and use of, information enhances adaptation to climate change and variability in the agricultural sector in semi-arid Central Tanzania. The research was carried out in two villages using Rogers’ Diffusion of Innovations theory and model to assess the dissemination of this information and its use by farmers in their adaptation of their farming practices to climate change and variability. This predominantly qualitative study employed a post-positivist paradigm. Some elements of a quantitative approach were also deployed in the data collection and analysis. The principal data collection methods were interviews and focus group discussions. The study population comprised farmers, agricultural extension officers and the Climate Change Adaptation in Africa project manager. Qualitative data were subjected to content analysis whereas quantitative data were analysed to generate mostly descriptive statistics using SPSS.  Key findings of the study show that farmers perceive a problem in the dissemination and use of climate information for agricultural development. They found access to agricultural inputs to be expensive, unreliable and untimely. To mitigate the adverse effects of climate change and variability on farming effectively, the study recommends the repackaging of current and accurate information on climate change and variability, farmer education and training, and collaboration between researchers, meteorology experts, and extension officers and farmers. Moreover, a clear policy framework for disseminating information related to climate change and variability is required.

Geomechanical Evaluations Helped Successful Drilling Operation and Completion in Mature Fields with Depleted Reservoirs Interbedded with Weaker Formations

2011 ◽  
Author(s):  
Abbas Khaksar ◽  
Khalil Rahman ◽  
Adrian White ◽  
Juanih Ghani ◽  
Mohammad S. Asadi ◽  
...  
Keyword(s):  
Drilling Operation
Sign in / Sign up

Export Citation Format

Share Document