Review of Earthquake Performance, Seismic Codes, and Dynamic Analysis of Elevators

2000 ◽  
Vol 16 (4) ◽  
pp. 853-878 ◽  
Author(s):  
Luis E. Suarez ◽  
Mahendra P. Singh
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Simple Formula ◽  
Ground Motions ◽  
Building Structures ◽  
Comprehensive Review ◽  
Survey Paper ◽  
Earthquake Performance ◽  
And Performance ◽  
Code Provisions

Elevators are among the most important mechanical systems in building structures that are quite susceptible to earthquake-induced damages. This survey paper is written primarily for the earthquake engineers who have not been directly involved in the design and maintenance of elevator systems but who are professionally interested in their functioning and performance. It describes the important components of an elevator system and highlights those that are most susceptible to earthquake-induced ground motions. A comprehensive review of the observed performance of elevators in past earthquakes reported by many investigators in the open literature is also presented. The evolution of code provisions for seismic design of these systems, measures adopted by the industry to mitigate the seismic effects and enhance seismic performance, and rationale of simple formula used for the current designs of counterweight guide rails and their supports are reviewed. A comprehensive review of the technical studies conducted to examine the dynamic behavior of these studies is also presented.

A Critical Comparison of Seismic Qualification Requirements for Safety Equipment in Various Codes and Standards

2003 ◽  
Author(s):  
F. G. Abatt ◽  
Quazi Hossain ◽  
Milon Meyer
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Lower Class ◽  
Department Of Energy ◽  
Building Structures ◽  
Performance Category ◽  
Code Provisions

Evaluation of life safety risks to facility occupants, public, and the environment that may result from earthquake events involves both building structures and equipment supported from these structures. But, it is the seismic design of building structures that typically receive the bulk of the attention from the code committees of the national professional organizations and the regulatory authorities. For safety related equipment in nuclear facilities (e.g., Seismic Category I equipment in nuclear power plants and Seismic Performance Category 3 and 4 equipment in the Department of Energy facilities), the seismic design and analysis guidelines and acceptance criteria are well established. But, for Nonseismic Category equipment in nuclear power plants and Seismic Performance Category 1 and 2 equipment in Department of Energy facilities, these have not yet been developed to the same level of completeness and rigor. The code provisions and guidelines available today for these lower class/categories of equipment are briefly, but critically discussed here, along with a comparison of the results of the application of these code provisions.

scholarly journals Optimal design and performance evaluation of tuned mass damper inerter in building structures

2021 ◽  
Author(s):  
Daniel Caicedo Diaz ◽  
Luis Lara-Valencia ◽  
John Blandon
Keyword(s):  
Performance Evaluation ◽  
Case Studies ◽  
Seismic Performance ◽  
Passive Control ◽  
Control Device ◽  
Design Parameters ◽  
Building Structures ◽  
Tuned Mass Dampers ◽  
Seismic Accelerations ◽  
And Performance

This paper concerns the numerical performance evaluation of multi-degree-of-freedom systems equipped with Tuned Mass Dampers-Inerter (TMDIs); a passive control device used for the mitigation of mechanical vibrations induced by dynamic loads. The inerter device is commonly used to increase the apparent mass of classics tuned mass dampers (TMDs), improving its seismic performance. To evaluate the TMDI action, three case studies are employed, determined from three real buildings of Medellin city from low, medium to high rise (30 meters, 97 meters, and 144 meters, respectively). Optimum design parameters are found using a metaheuristic optimization based on the differential evolution method, first, for the minimization of the horizontal peak displacements, and then, for the minimization of the root mean square (RMS) response of displacements. Besides, the case studies are assessed using eight seismic accelerations records representative of the literature. Finally, the seismic performance is evaluated on each case study considering different levels of inertance induced by the inerter device: 5%, 20%, and 50% with respect to the total mass of the building, for which it is observed a better dynamic behavior when TMDIs with lower values of inertance are implemented.

scholarly journals Seismic Design and Performance Evaluation of Fusion-Type Polyethylene Pipeline

2020 ◽  
Vol 20 (5) ◽  
pp. 297-307
Author(s):  
DongSoon Park
Keyword(s):  
Performance Evaluation ◽  
Seismic Performance ◽  
Seismic Design ◽  
Ground Deformation ◽  
Axial Strain ◽  
Evaluation Procedure ◽  
Seismic Performance Evaluation ◽  
Evaluation Procedures ◽  
And Performance ◽  
Fusion Type

It is known that buried polyethylene (PE) pipes exhibit good seismic performance owing to their flexibility and ductility. The use of PE pipes as buried pipelines is gradually increasing, but currently, there are no seismic design or seismic performance evaluation procedures for domestic PE pipes in Korea. In this study, a seismic design and performance evaluation procedure for a domestic fusion-type PE pipe was developed based on the response displacement method, which is relatively easy to apply. The procedure was based on a method of examining whether the sum of the axial strain induced by both normal and seismic loading was within the allowable strain of the PE pipe. While calculating the axial strain of the ground, a coefficient was introduced to account for the heterogeneity of the ground. A seismic review method for ground deformation, i.e., ground liquefaction, was also introduced. The proposed procedure will provide a useful technical basis for evaluating the seismic design and performance of buried PE pipes in future studies.

scholarly journals Comprehensive Review of Optimal and Smart Design of Nonlinear Building Structures With and Without Passive Dampers Subjected to Earthquake Loading

2021 ◽  
Vol 7 ◽  
Author(s):  
Izuru Takewaki ◽  
Hiroki Akehashi
Keyword(s):  
Optimal Design ◽  
Ground Motions ◽  
Seismic Loading ◽  
Building Structures ◽  
Earthquake Loading ◽  
Comprehensive Review ◽  
Building Frames ◽  
Earthquake Ground Motions ◽  
Passive Dampers ◽  
Made In

The optimal and smart design of nonlinear building structures with and without passive dampers subjected to earthquake loading is of great concern in the structural design of building structures. The research started around 1980 and many investigations have been conducted. A comprehensive review on this subject is made in this article. After the description of essential features of the optimal design problem of nonlinear building structures under earthquake ground motions, analysis types of optimization problems are explained and the significance of the dynamic pushover analysis is discussed from the viewpoint of analysis of limit states under earthquake ground motions of magnitude larger than the code-specified level. Then, the categorization by the response of frames and dampers was made. In this categorization, several subjects are discussed first: 1) Optimal design of bare nonlinear building frames under seismic loading, 2) Optimal design of nonlinear dampers for elastic building frames under seismic loading, 3) Optimal design of linear dampers for nonlinear building frames under seismic loading, 4) Optimal design of nonlinear building frames with specified nonlinear dampers under seismic loading, 5) Optimal design of nonlinear dampers for specified nonlinear building frames under seismic loading, 6) Simultaneous optimization of elastic-plastic building structures and passive dampers. Finally, the classification of researches in view of solution strategies is conducted for providing another viewpoint.

scholarly journals Experimental Study on the Behavior of Existing Reinforced Concrete Multi-Column Piers under Earthquake Loading

2021 ◽  
Vol 11 (6) ◽  
pp. 2652
Author(s):  
Jung Han Kim ◽  
Ick-Hyun Kim ◽  
Jin Ho Lee
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Bridge Piers ◽  
Scale Model ◽  
Inertia Force ◽  
Small Scale ◽  
Lap Splice ◽  
Existing Structures ◽  
Seismic Design Code ◽  
Seismic Force

When a seismic force acts on bridges, the pier can be damaged by the horizontal inertia force of the superstructure. To prevent this failure, criteria for seismic reinforcement details have been developed in many design codes. However, in moderate seismicity regions, many existing bridges were constructed without considering seismic detail because the detailed seismic design code was only applied recently. These existing structures should be retrofitted by evaluating their seismic performance. Even if the seismic design criteria are not applied, it cannot be concluded that the structure does not have adequate seismic performance. In particular, the performance of a lap-spliced reinforcement bar at a construction joint applied by past practices cannot be easily evaluated analytically. Therefore, experimental tests on the bridge piers considering a non-seismic detail of existing structures need to be performed to evaluate the seismic performance. For this reason, six small scale specimens according to existing bridge piers were constructed and seismic performances were evaluated experimentally. The three types of reinforcement detail were adjusted, including a lap-splice for construction joints. Quasi-static loading tests were performed for three types of scale model with two-column piers in both the longitudinal and transverse directions. From the test results, the effect on the failure mechanism of the lap-splice and transverse reinforcement ratio were investigated. The difference in failure characteristics according to the loading direction was investigated by the location of plastic hinges. Finally, the seismic capacity related to the displacement ductility factor and the absorbed energy by hysteresis behavior for each test were obtained and discussed.

scholarly journals Applications of soft computing models for predicting sea surface temperature: a comprehensive review and assessment

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Masoud Haghbin ◽  
Ahmad Sharafati ◽  
Davide Motta ◽  
Nadhir Al-Ansari ◽  
Mohamadreza Hosseinian Moghadam Noghani
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Soft Computing ◽  
Sea Surface ◽  
Linear Processes ◽  
Comprehensive Review ◽  
Droughts And Floods ◽  
Input Variables ◽  
And Performance ◽  
Computing Models

AbstractThe application of soft computing (SC) models for predicting environmental variables is widely gaining popularity, because of their capability to describe complex non-linear processes. The sea surface temperature (SST) is a key quantity in the analysis of sea and ocean systems, due to its relation with water quality, organisms, and hydrological events such as droughts and floods. This paper provides a comprehensive review of the SC model applications for estimating SST over the last two decades. Types of model (based on artificial neural networks, fuzzy logic, or other SC techniques), input variables, data sources, and performance indices are discussed. Existing trends of research in this field are identified, and possible directions for future investigation are suggested.

Sign in / Sign up

Export Citation Format

Share Document