Comparison of the tensile properties of bovine muscle at 20°C and 3°C by in situ dynamic measurements and imaging in high pressure scanning electron microscopy (HPSEM)

2022 ◽  
pp. 253-256
Author(s):  
T Tsavalos ◽  
K J Hollis ◽  
J S Shah
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Pressure ◽  
Tensile Properties ◽  
Dynamic Measurements ◽  
Bovine Muscle ◽  
Scanning Electron

Scattering of Electrons at High - Pressure and Restoration of Image Contrast in High Pressure Scanning Electron Microscopy

1990 ◽  
Vol 48 (1) ◽  
pp. 384-385
Author(s):  
J. S. Shah ◽  
R. Durkin ◽  
A. N. Farley
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Pressure ◽  
Cross Sections ◽  
Single Scattering ◽  
Image Contrast ◽  
Experimental Scheme ◽  
Medium Resolution ◽  
Scattering Approximation ◽  
Scanning Electron

It is now possible to perform High Pressure Scanning Electron Microscopy (HPSEM) in the range 10 to 2000 Pa. Here the effect of scattering on resolution has been evaluated by calculating the profile of the beam in high pressure and assessing its effect on the image contrast . An experimental scheme is presented to show that the effect of the primary beam ionization is to reduce image contrast but this effect can be eliminated by a novel use of specimen current detection in the presence of an electric field. The mechanism of image enhancement is discussed in terms of collection of additional carriers generated by the emissive components.High Pressure SEM (HPSEM) instrumentation is establishing itself as commercially viable. There are now a number of manufacturers, such as JEOL, ABT, ESCAN, DEBEN RESEARCH, selling microscopes and accessories for HPSEM. This is because high pressure techniques have begun to yield high quality micrographs at medium resolution.To study the effect of scattering on the incident electron beam, its profile - in a high pressure environment - was evaluated by calculating the elastic and inelastic scattering cross sections for nitrogen in the energy range 5-25 keV. To assess the effect of the scattered beam on the image contrast, the modification of a sharp step contrast function due to scattering was calculated by single scattering approximation and experimentally confirmed for a 20kV accelerated beam.

High-Resolution Resistance Mapping in SEM

2018 ◽  
Author(s):  
Grigore Moldovan ◽  
Wolfgang Joachimi ◽  
Guillaume Boetsch ◽  
Jörg Jatzkowski ◽  
Frank Altman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Reference Structure ◽  
Total Resistance ◽  
Embedded Electronics ◽  
Improved Performance ◽  
Mapping Techniques ◽  
Scanning Electron

Abstract This work presents advanced resistance mapping techniques based on Scanning Electron Microscopy (SEM) with nanoprobing systems and the related embedded electronics. Focus is placed on recent advances to reduce noise and increase speed, such as integration of dedicated in situ electronics into the nanoprobing platform, as well as an important transition from current-sensitive to voltagesensitive amplification. We show that it is now possible to record resistance maps with a resistance sensitivity in the 10W range, even when the total resistance of the mapped structures is in the range of 100W. A reference structure is used to illustrate the improved performance, and a lowresistance failure case is presented as an example of analysis made possible by these developments.

scholarly journals Design and Characterization of Microscale Auxetic and Anisotropic Structures Fabricated by Multiphoton Lithography

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 446
Author(s):  
Ioannis Spanos ◽  
Zacharias Vangelatos ◽  
Costas Grigoropoulos ◽  
Maria Farsari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mechanical Performance ◽  
Element Analysis ◽  
Mechanical Responses ◽  
Multiphoton Lithography ◽  
Anisotropic Structures ◽  
Scanning Electron

The need for control of the elastic properties of architected materials has been accentuated due to the advances in modelling and characterization. Among the plethora of unconventional mechanical responses, controlled anisotropy and auxeticity have been promulgated as a new avenue in bioengineering applications. This paper aims to delineate the mechanical performance of characteristic auxetic and anisotropic designs fabricated by multiphoton lithography. Through finite element analysis the distinct responses of representative topologies are conveyed. In addition, nanoindentation experiments observed in-situ through scanning electron microscopy enable the validation of the modeling and the observation of the anisotropic or auxetic phenomena. Our results herald how these categories of architected materials can be investigated at the microscale.

scholarly journals Formation of Bushveld anorthosite by reactive porous flow

2020 ◽  
Vol 176 (1) ◽  
Author(s):  
W. D. Maier ◽  
S.-J. Barnes ◽  
D. Muir ◽  
D. Savard ◽  
Y. Lahaye ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Compositional Data ◽  
Crystal Mush ◽  
Porous Flow ◽  
Scanning Electron

AbstractBushveld anorthosites commonly contain the so-called “mottles” comprising irregular, typically centimetric domains of oikocrystic pyroxene or olivine enclosing small, embayed plagioclase grains. The mottles were traditionally interpreted to result from solidification of trapped intercumulus liquid or via in situ crystallisation at the top of the crystal mush. Here, we present microtextural and compositional data of a mottle to place further constraints on the formation of anorthosite layers. Element maps generated by scanning electron microscopy reveal that plagioclase within and around the mottle has markedly elevated An contents (up to An95) relative to the host anorthosite and is strongly reversely zoned. Other unusual features, some of which were reported previously, include a halo of sub-vertically oriented, acicular phlogopite around the mottle, elevated contents of disseminated sulfides, and relatively evolved yet Ni-rich olivine (Fo71–75, 3000 ppm Ni). These features are interpreted to result from reactive porous flow of hot, acidic fluid enriched in nickel and sulfur through proto norite. The fluids dissolved mafic minerals and leached alkalis from the outer rims of plagioclase grains. Reconnaissance studies suggest that reversed zoning of plagioclase is a common feature in Bushveld norite and anorthosite. This implies that reactive porous flow could have been far more pervasive than currently realised and that Bushveld anorthosite layers formed through recrystallisation of norites.

Distribution of diaphragmatic lymphatic stomata

1991 ◽  
Vol 70 (4) ◽  
pp. 1544-1549 ◽  
Author(s):  
D. Negrini ◽  
S. Mukenge ◽  
M. Del Fabbro ◽  
C. Gonano ◽  
G. Miserocchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Frequency Distribution ◽  
Maximum Diameter ◽  
Minimum Diameter ◽  
Average Value ◽  
Scanning Electron

In seven anesthetized rabbits we measured the size, shape, and density of lymphatic stomata on the peritoneal and pleural sides of the diaphragm. The diaphragm was fixed in situ and processed for scanning electron microscopy. Results are from 2,902 peritoneal and 3,086 pleural fields (each 1,620 microns 2) randomly chosen from the various specimens. Stomata were seen in 9% of the fields examined, and in 30% of the cases they appeared grouped in clusters with 2-14 stomata/field. Stoma density was 250 +/- 242 and 72 +/- 57 (SD) stomata/mm2 on peritoneal and pleural sides, respectively, and it was similar over the muscular and tendinous portion of the two surfaces. The maximum diameter ranged from less than 1 to approximately 30 microns, with an average value of 1.2 +/- 3.1 micron. The ratio of the maximum to the minimum diameter and the surface area averaged 2 +/- 1.4 and 0.7 +/- 2.4 micron 2, respectively. The maximum and minimum diameter and surface area values followed a lognormal frequency distribution, suggesting that stomata geometry is affected by diaphragmatic tension.

Sign in / Sign up

Export Citation Format

Share Document