A Software Tool for Lyophilization Primary Drying Process Development and Scale-up Including Process Heterogeneity, I: Laboratory-Scale Model Testing

2021 ◽  
Vol 22 (8) ◽  
Author(s):  
Robin Bogner ◽  
Emily Gong ◽  
William Kessler ◽  
Michael Hinds ◽  
Arushi Manchanda ◽  
...  
2011 ◽  
Vol 12 (1) ◽  
pp. 372-378 ◽  
Author(s):  
Sajal Manubhai Patel ◽  
Michael J. Pikal

2020 ◽  
Vol 74 (12) ◽  
pp. 1024-1025
Author(s):  
Lucien Blanchard ◽  
Chris Rader ◽  
Ennio Vanoli ◽  
Roger Marti

In this work, we discuss the process development and scale-up of the melt polycondensation of polyester amides from a laboratory scale to kg-scale in a kneader reactor. We identified and optimized the most important critical parameters and produced kg-quantities of polyester amides with Mn up to 25'000 g/mol and reproducible thermal and mechanical properties. The special kneader reactor allows safe and efficient scale-up of polymerisation reactions at high temperature and viscous melts due to good mixing and efficient mass transfer.


Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 482
Author(s):  
Fatiha Berroug ◽  
Yassir Bellaziz ◽  
Naaila Ouazzani ◽  
Fatima Ait Nouh ◽  
Abdessamad Hejjaj ◽  
...  

Morocco is the leading producer of phosphate and its derivatives in the world with a total production of 35 Mt. However, the extraction and the valorization of this mine generate huge quantities of phosphate washing waste clay (PHWWC) that constitute a main environmental and economic concern. To facilitate this waste clay storage and handling, it is necessary to decrease its moisture content that represents 80% of PHWWC. The present paper is devoted to studying the conductive drying of PHWWC. Drying experiments were conducted in a laboratory pilot. Afterwards, the experiment results were implemented in a one-dimensional numerical model of heat and mass transfer in a porous media to identify the drying parameters and performances. It was found that most of the water contained in PHWWC is free water that is removed with a constant drying rate. The volume reduction with a marked cracks phenomenon attained 65% without any significant effect of drying temperature and sample thickness. The effective moisture diffusivity of the PHWWC for a conductive drying process is ranged between 10−9 and 1.1 × 10−8 m2·s−1. The thermal efficiency of the drying system is up to 86%. The results could be used for the purpose of design and scale-up of the industrial dryer based on laboratory-scale experiments.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Seedhabadee Ganeshan ◽  
Seon Hwa Kim ◽  
Vladimir Vujanovic

AbstractThe benefit of microorganisms to humans, animals, insects and plants is increasingly recognized, with intensified microbial endophytes research indicative of this realization. In the agriculture industry, the benefits are tremendous to move towards sustainable crop production and minimize or circumvent the use of chemical fertilizers and pesticides. The research leading to the identification of potential plant endophytes is long and arduous and for many researchers the challenge is ultimately in scale-up production. While many of the larger agriculture and food industries have their own scale-up and manufacturing facilities, for many in academia and start-up companies the next steps towards production have been a stumbling block due to lack of information and understanding of the processes involved in scale-up fermentation. This review provides an overview of the fermentation process from shake flask cultures to scale-up and the manufacturing steps involved such as process development optimization (PDO), process hazard analysis (PHA), pre-, in- and post-production (PIP) challenges and finally the preparation of a technology transfer package (TTP) to transition the PDO to manufacturing. The focus is on submerged liquid fermentation (SLF) and plant endophytes production by providing original examples of fungal and bacterial endophytes, plant growth promoting Penicillium sp. and Streptomyces sp. bioinoculants, respectively. We also discuss the concepts, challenges and future perspectives of the scale-up microbial endophyte process technology based on the industrial and biosafety research platform for advancing a massive production of next-generation biologicals in bioreactors.


Author(s):  
John Halkyard ◽  
Senu Sirnivas ◽  
Samuel Holmes ◽  
Yiannis Constantinides ◽  
Owen H. Oakley ◽  
...  

Floating spar platforms are widely used in the Gulf of Mexico for oil production. The spar is a bluff, vertical cylinder which is subject to Vortex Induced Motions (VIM) when current velocities exceed a few knots. All spars to date have been constructed with helical strakes to mitigate VIM in order to reduce the loads on the risers and moorings. Model tests have indicated that the effectiveness of these strakes is influenced greatly by details of their design, by appurtenances placed on the outside of the hull and by current direction. At this time there is limited full scale data to validate the model test results and little understanding of the mechanisms at work in strake performance. The authors have been investigating the use of CFD as a means for predicting full scale VIM performance and for facilitating the design of spars for reduced VIM. This paper reports on the results of a study to benchmark the CFD results for a truss spar with a set of model experiments carried out in a towing tank. The focus is on the effect of current direction, reduced velocity and strake pitch on the VIM response. The tests were carried out on a 1:40 scale model of an actual truss spar design, and all computations were carried out at model scale. Future study will consider the effect of external appurtenances on the hull and scale-up to full scale Reynolds’ numbers on the results.


2014 ◽  
Vol 18 (10) ◽  
pp. 1175-1180 ◽  
Author(s):  
Luciano Lattuada ◽  
Maria Argese ◽  
Valeria Boi ◽  
Laura Galimberti ◽  
Sonia Gazzetto

2013 ◽  
Vol 20 (1) ◽  
pp. 121-130 ◽  
Author(s):  
A. Jackson ◽  
B. Turnbull ◽  
R. Munro

Abstract. Lobe and cleft patterns are frequently observed at the leading edge of gravity currents, including non-Boussinesq particle-laden currents such as powder snow avalanches. Despite the importance of the instability in driving air entrainment, little is known about its origin or the mechanisms behind its development. In this paper we seek to gain a better understanding of these mechanisms from a laboratory scale model of powder snow avalanches using lightweight granular material. The instability mechanisms in these flows appear to be a combination of those found in both homogeneous Boussinesq gravity currents and unsuspended granular flows, with the size of the granular particles playing a central role in determining the wavelength of the lobe and cleft pattern. When scaled by particle diameter a relationship between the Froude number and the wavelength of the lobe and cleft pattern is found, where the wavelength increases monotonically with the Froude number.


Sign in / Sign up

Export Citation Format

Share Document