The Structure and Function of the Basement Membrane Muscle System in Amphiporus lactifloreus (Nemertea)

1952 ◽  
Vol s3-93 (21) ◽  
pp. 1-15
Author(s):  
J. B. COWEY
Keyword(s):  
Basement Membrane ◽  
Cross Section ◽  
Circular Cross Section ◽  
The Body ◽  
Minimum Length ◽  
Muscle Fibres ◽  
Body Volume ◽  
Cross Sectional ◽  
Elliptical Cross ◽  
Sectional Shape

The body wall of A. lactifloreus has the following structure from the outside inwards. (i) A basement membrane of five to six layers immediately underlying the epithelium. Each layer consists of right-hand and left-hand geodesic fibres making a lattice, whose constituent parallelograms have a side length of from 5 to 6µ. The fibres are attached to one another where they cross; so there can be no slipping relative to one another. (ii) A layer of circular muscle-fibres running round the animal containing two systems of argyrophil fibres--one of fibres at intervals of 10µ. running parallel to the muscle-fibres and the other of fibres running radially through the layer from the basement membrane to the myoseptum. (iii) A myoseptum which is identical in structure with a single layer of the basement membrane (iv) A layer of longitudinal muscle, whose fibres are arranged in layers on each side of a series of longitudinal radial membranes. Membranes identical in structure with the basement membrane invest the nerve cords, the gut, the gonads, and the proboscis. The interrelations of argyrophil and muscle-fibres in the muscle layers is described and their functioning discussed. The system of inextensible geodesic fibres is analysed from a functional standpoint. The maximum volume enclosed by a cylindrical element (cross-section circular), of such a length that the geodesic makes one complete turn round it, varies with the value of the angle θ between the fibres and the longitudinal axis. When θ is 0° the volume is zero; it increases to a maximum when θ is 54° 44' and decreases again to zero when θ is 90°. The length of the element under these conditions varies from zero when θ is 90° to a maximum (the length of one turn of the geodesic) when θ is 0°. The body-volume of the worm is constant. Thus it has a maximum and minimum length when its cross-section is circular, and at any length between these values its cross-section becomes more or less elliptical. It is maximally elliptical when θ is 54° 44', i.e. when the volume the system could contain, at circular cross-section, is maximal. From measurements of the ratio of major to minor axes of this maximally elliptical cross-section, the maximum and minimum lengths of the worm relative to the relaxed length and values of θ at maximum and minimum length are calculated. The worm is actually unable to contract till its cross-section is circular; but measurements of its cross-sectional shape at the minimum length it can attain, permit calculation of the theoretical length and value of θ for this cross-sectional shape. Calculated values of length and the angle 6 agree well with the directly observed values.

Experimental and Numerical Analysis of Titanium Microtube Elliptical Flaring

2010 ◽  
Author(s):  
Weichao Wu ◽  
Ying Huang ◽  
Rajiv Malhotra ◽  
Yongjun Wang ◽  
Jian Cao
Keyword(s):  
Analytical Model ◽  
Cross Section ◽  
Fem Simulation ◽  
Circular Cross Section ◽  
Forming Process ◽  
Cross Sectional ◽  
Elliptical Cross ◽  
Tube Flaring ◽  
Sectional Shape ◽  
The Relationship

Traditional tube flaring processes focuses on expanding one end of the tube without changing its cross-sectional shape. This paper presents a new two-step tube flaring process for expanding one end of a titanium alloy microtube while simultaneously changing its cross-sectional shape from circular to elliptical. Experiments were performed to investigate and verify this process. Furthermore, an analytical model was developed to analyze the forming process and investigate the relationship between punch feed and maximum plastic strain during the flaring process. The analysis shows that the two-step flaring process used is effective in expanding the circular cross section to an elliptical cross section without failure. It is also shown that the developed analytical model can predict the fracture of the tube end during the flaring process approximately. Finally, a FEM simulation was performed to further investigate the two-step flaring process.

scholarly journals Cross-Section Deformation and Bending Moment of a Steel Square Tubular Section

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5170
Author(s):  
Stanisław Kut ◽  
Feliks Stachowicz
Keyword(s):  
Numerical Modeling ◽  
Cross Section ◽  
Circular Cross Section ◽  
Bending Moment ◽  
Experimental Tests ◽  
Cross Sectional ◽  
Cold Bending ◽  
Bending Process ◽  
The Cross ◽  
Sectional Shape

When bending thin-walled profiles, significant distortion of the cross-section occurs, which has a significant impact on the course of the bending moment characteristics and on the value of allowable bending curvatures. This paper presents the results of experimental and numerical modeling of the box profile bending process, which was carried out in order to determine the dependence of the cross-sectional shape and bending moment of bending curvature. Extensive numerical calculations were used to model the process of shaping a square pipe from a circular tube and to model the bending process, especially when taking into account the effects of such a deformation path. The pure bending moment characteristics and the deformation of the cross-section were performed for a 25 × 25 × 2 mm square tube made of S235JR structural steel. The innovative approach for determining the parameters of cold bending square tubes pertained to considering the stress state in the preserved material in individual areas of their cross-section. The results of numerical modeling—after considering the history of deformation (i.e., the process of forming a square pipe from a pipe with a circular cross-section)—gave a satisfactory agreement with the results of experimental tests, both in terms of the degree of pipe wall deflection and the characteristics of the bending moment.

Automated 3D measurement of fiber cross section morphology in handsheets

2012 ◽  
Vol 27 (2) ◽  
pp. 264-269 ◽  
Author(s):  
Christian Lorbach ◽  
Ulrich Hirn ◽  
Johannes Kritzinger ◽  
Wolfgang Bauer
Keyword(s):  
Image Analysis ◽  
Cross Section ◽  
Cross Sections ◽  
Image Plane ◽  
3D Measurement ◽  
Cross Sectional ◽  
Fiber Cross Section ◽  
Fiber Wall ◽  
Sectional Shape ◽  
Cross Section Geometry

Abstract We present a method for 3D measurement of fiber cross sectional morphology from handsheets. An automated procedure is used to acquire 3D datasets of fiber cross sectional images using an automated microtome and light microscopy. The fiber cross section geometry is extracted using digital image analysis. Simple sample preparation and highly automated image acquisition and image analysis are providing an efficient tool to analyze large samples. It is demonstrated that if fibers are tilted towards the image plane the images of fiber cross sections are always larger than the true fiber cross section geometry. In our analysis the tilting angles of the fibers to the image plane are measured. The resulting fiber cross sectional images are distorted to compensate the error due to fiber tilt, restoring the true fiber cross sectional shape. We use an approximated correction, the paper provides error estimates of the approximation. Measurement results for fiber wall thickness, fiber coarseness and fiber collapse are presented for one hardwood and one softwood pulp.

scholarly journals An atomic resolution study of precipitates in an Al-Ge Alloy

1986 ◽  
Vol 44 ◽  
pp. 538-539
Author(s):  
U. Dahmen ◽  
C. Nelson ◽  
K.H. Westmacott
Keyword(s):  
Cross Section ◽  
Atomic Resolution ◽  
Face Centered Cubic ◽  
Orientation Relationships ◽  
Cross Sectional ◽  
The Past ◽  
Moiré Fringes ◽  
Typical Aspect ◽  
Face Centered ◽  
Sectional Shape

The difficulty of precipitating germanium in dilute aluminum-germanium alloys is due to a large difference in crystal structures (face-centered cubic and diamond cubic) accompanied by a substantial volume expansion of 36%. A great variety of precipitate morphologies and orientation relationships are observed. A frequently found morphology is that of <100> needles. By selected area diffraction and Moire fringes it has been established that <100> Al and <110> Ge are parallel along the needle axis. The typical aspect ratio of about 100 has made it difficult in the past to investigate the cross-sectional shape and internal structure of these needles, although some indications of internal twinning were found in plates. in the present work, the Berkeley Atomic Resolution Microscope was used to examine needles in cross section by imaging along the <110> Ge <100> Al needle axis.

scholarly journals Optimization of the cross-sectional shape of the belts of trihedral lattice supports

2019 ◽  
Vol 7 (4) ◽  
pp. 5-8
Author(s):  
Linar Sabitov ◽  
Ilnar Baderddinov ◽  
Anton Chepurnenko
Keyword(s):  
Objective Function ◽  
Nonlinear Optimization ◽  
Cross Section ◽  
Optimization Methods ◽  
Cross Sectional ◽  
Maximum Value ◽  
Axial Moment ◽  
The Cross ◽  
Nonlinear Optimization Methods ◽  
Sectional Shape

The article considers the problem of optimizing the geometric parameters of the cross section of the belts of a trihedral lattice support in the shape of a pentagon. The axial moment of inertia is taken as the objective function. Relations are found between the dimensions of the pentagonal cross section at which the objective function takes the maximum value. We introduce restrictions on the constancy of the consumption of material, as well as the condition of equal stability. The solution is performed using nonlinear optimization methods in the Matlab environment.

Numerical study for the improvement of bead spreading architecture with modified nozzle geometries in additive manufacturing of polymers

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Easir Arafat Papon ◽  
Anwarul Haque ◽  
Muhammad Ali Rob Sharif
Keyword(s):  
Free Surface ◽  
Numerical Model ◽  
3D Printing ◽  
Cross Section ◽  
Nozzle Exit ◽  
Cross Sectional ◽  
Content Type ◽  
The Cross ◽  
Viscous Polymer ◽  
Sectional Shape

Purpose This paper aims to develop a numerical model of bead spreading architecture of a viscous polymer in fused filament fabrication (FFF) process with different nozzle geometry. This paper also focuses on the manufacturing feasibility of the nozzles and 3D printing of the molten beads using the developed nozzles. Design/methodology/approach The flow of a highly viscous polymer from a nozzle, the melt expansion in free space and the deposition of the melt on a moving platform are captured using the FLUENT volume of fluid (VOF) method based computational fluid dynamics code. The free surface motion of the material is captured in VOF, which is governed by the hydrodynamics of the two-phase flow. The phases involved in the numerical model are liquid polymer and air. A laminar, non-Newtonian and non-isothermal flow is assumed. Under such assumptions, the spreading characteristic of the polymer is simulated with different nozzle-exit geometries. The governing equations are solved on a regular stationary grid following a transient algorithm, where the boundary between the polymer and the air is tracked by piecewise linear interface construction (PLIC) to reconstruct the free surface. The prototype nozzles were also manufactured, and the deposition of the molten beads on a flatbed was performed using a commercial 3D printer. The deposited bead cross-sections were examined through optical microscopic examination, and the cross-sectional profiles were compared with those obtained in the numerical simulations. Findings The numerical model successfully predicted the spreading characteristics and the cross-sectional shape of the extruded bead. The cross-sectional shape of the bead varied from elliptical (with circular nozzle) to trapezoidal (with square and star nozzles) where the top and bottom surfaces are significantly flattened (which is desirable to reduce the void spaces in the cross-section). The numerical model yielded a good approximation of the bead cross-section, capturing most of the geometric features of the bead with a reasonable qualitative agreement compared to the experiment. The quantitative comparison of the cross-sectional profiles against experimental observation also indicated a favorable agreement. The significant improvement observed in the bead cross-section with the square and star nozzles is the flattening of the surfaces. Originality/value The developed numerical algorithm attempts to address the fundamental challenge of voids and bonding in the FFF process. It presents a new approach to increase the inter-bead bonding and reduce the inter-bead voids in 3D printing of polymers by modifying the bead cross-sectional shape through the modification of nozzle exit-geometry. The change in bead cross-sectional shape from elliptical (circular) to trapezoidal (square and star) cross-section is supposed to increase the contact surface area and inter-bead bonding while in contact with adjacent beads.

Factors Controlling the Change of Shape of Certain Nemertean and Turbellarian Worms

1958 ◽  
Vol 35 (4) ◽  
pp. 731-748 ◽  
Author(s):  
R. B. CLARK ◽  
J. B. COWEY
Keyword(s):  
Water Conservation ◽  
Ecological Factors ◽  
Longitudinal Axis ◽  
The Body ◽  
Cross Sectional ◽  
Ciliary Action ◽  
Theoretical Predictions ◽  
Observed Behaviour ◽  
Body Wall Musculature ◽  
Sectional Shape

1. Nemerteans and turbellarians have an inextensible fibre system around them in the form of a lattice of left- and right-handed spirals. The effect of this system on the change of shape on these worms has been analysed theoretically and compared with the observed behaviour of nine species of turbellarian and nemertean from widely differing habitats. 2. The following theoretical relationships have been studied: (a) Variation of the angle between the geodesics and the longitudinal axis of the worm during changes in length, and the role of the fibre system in limiting changes in length of the animal. (b) The change in cross-sectional shape during changes in length. (c) The extension of the fibres and the extensibility of the worms, assuming the fibres of the lattice to be elastic. 3. The species investigated conform with the theoretical predictions to varying degrees and have been grouped accordingly: (a) Geonemertes dendyi and Rhynchodemus bilineatus have low extensibilities and fit the prediction well. They are nearly circular in cross-section at all lengths as a result of their low extensibility and this is related to their terrestrial habit and need for water conservation. (b) Amphiporus lactifloreus, Lineus gesserensis and L. longissimus are moderately flattened in the relaxed position and have extensibilities between 6 and 10. They are marine crawling forms using cilia for locomotion and so must present a fairly large ciliated surface to the substratum. The fibre system does not limit contraction; the compression of the epithelial cells causes the observed extensibilities to fall a little short of the theoretical values. (c) Cerebratulus lacteus, Malacobdella grossa, Polycelis nigra and Dendrocoelum lacteum are very flattened forms and have very high theoretical extensibilities, but very low observed ones. The factors causing this are the thickness of the body-wall musculature (Cerebratulus), the limiting effect of longitudinal and circular reticulin fibres in the muscle layers, and the presence of dorso-ventral and diagonal muscles. Their flattened form is correlated with ecological factors (with swimming in Cerebratulus, with its parasitic life in the mantle of bivalves in Melacobdella) or with physical ones in turbellarians where a permanently flattened form is necessary for these worms to move by ciliary action.

Simulasi Perancangan Drainase Muka Tanah pada Bandar Udara Achmad Yani Semarang Sebagai Salah Satu Usaha Pencegahan Banjir

WARTA ARDHIA ◽  
2013 ◽  
Vol 39 (4) ◽  
pp. 305-316
Author(s):  
Ataline Muliasari ◽  
Lupi Wahyuningsih
Keyword(s):  
Surface Water ◽  
Cross Section ◽  
Land Surface ◽  
Drainage Channel ◽  
Water Drainage ◽  
Hydraulic Radius ◽  
Channel Depth ◽  
Cross Sectional ◽  
Surface Drainage ◽  
Sectional Shape

Drainage is defined as surface water drainage, either by gravity or by pump which aims to prevent inundation, maintain and lower the water level im order to avoid the amount of water. Ahmad Yani Airport has a poor drainage systems. Furthermore, land subsidence in Semarang area potential for experiencing flooding when the rainy season with a fairly high rainfall. Based on the results of processing the data showed that it is needed the land surface drainage channel with a cross-sectional shape of a trapezium. When the width of the base of the cross section is 3 meters , then the required channel depth is 3.9 meters with a hydraulic radius is 0.82-meter, and hydraulic depth is 3.05 meters. Drainase didefinisikan sebagai pembuangan air permukaan, baik secara gravitasi maupun dengan pompa yang bertujuan untuk mencegah terjadinya genangan, menjaga dan menurunkan permukaan air sehingga genangan air dapat dihindarkan. Bandar Udara Ahmad Yani dengan kondisi sistem drainase yang kurang baik dan penurunan permukaan tanah di wilayah Semarang, maka bila musim penghujan tiba dengan curah hujan yang cukup tinggi selalu berpotensi untuk mengalami banjir. Berdasarkan hasil pengolahan data juga didapatkan hasil bahwa untuk menyesuaikan antara curah hujan di wilayah Semarang dengan luas area Bandar udara Achmad Yani diperlukan saluran drainase muka tanah berupa saluran dengan bentuk penampang trapezium. Bila lebar dasar dari penampang trapezim tersebut adalah 3 meter, maka diperlukan saluran sedalam 3,9 meter dengan Jari-jari hydraulic 0,82 meter, dan kedalaman hydraulic 3,05 meter.

Numerical Study of Incomplete Stent Apposition Caused by Deploying Undersized Stent in Arteries With Elliptical Cross Sections

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Bo Jiang ◽  
Vikas Thondapu ◽  
Eric K. W. Poon ◽  
Peter Barlis ◽  
Andrew S. H. Ooi
Keyword(s):  
Shear Rate ◽  
Cross Section ◽  
Cross Sections ◽  
Numerical Study ◽  
Circular Cross Section ◽  
Blood Stream ◽  
Cfd Simulations ◽  
Elliptical Cross ◽  
Incomplete Stent Apposition ◽  
Computational Fluid Dynamics Cfd

Incomplete stent apposition (ISA) is one of the causes leading to poststent complications, which can be found when an undersized or an underexpanded stent is deployed at lesions. The previous research efforts have focused on ISA in idealized coronary arterial geometry with circular cross section. However, arterial cross section eccentricity plays an important role in both location and severity of ISA. Computational fluid dynamics (CFD) simulations are carried out to systematically study the effects of ISA in arteries with elliptical cross section, as such stents are partially embedded on the minor axis sides of the ellipse and malapposed elsewhere. Overall, ISA leads to high time-averaged wall shear stress (TAWSS) at the proximal end of the stent and low TAWSS at the ISA transition region and the distal end. Shear rate depends on both malapposition distance and blood stream locations, which is found to be significantly higher at the inner stent surface than the outer surface. The proximal high shear rate signifies increasing possibility in platelet activation, when coupled with low TAWSS at the transition and distal regions which may indicate a nidus for in-stent thrombosis.

scholarly journals Computational Study of Zigzag Spacer Design with Elliptical Cross-Section Filaments

2020 ◽  
Vol 307 ◽  
pp. 01047
Author(s):  
Gohar Shoukat ◽  
Farhan Ellahi ◽  
Muhammad Sajid ◽  
Emad Uddin
Keyword(s):  
Mass Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Computational Study ◽  
Flow Direction ◽  
Three Dimensional ◽  
Circular Cross Section ◽  
Two Dimensional ◽  
Permeate Flux ◽  
Elliptical Cross

The large energy consumption of membrane desalination process has encouraged researchers to explore different spacer designs using Computational Fluid Dynamics (CFD) for maximizing permeate per unit of energy consumed. In previous studies of zigzag spacer designs, the filaments are modeled as circular cross sections in a two-dimensional geometry under the assumption that the flow is oriented normal to the filaments. In this work, we consider the 45° orientation of the flow towards the three-dimensional zigzag spacer unit, which projects the circular cross section of the filament as elliptical in a simplified two-dimensional domain. OpenFOAM was used to simulate the mass transfer enhancement in a reverse-osmosis desalination unit employing spiral wound membranes lined with zigzag spacer filaments. Properties that impact the concentration polarization and hence permeate flux were analyzed in the domain with elliptical filaments as well as a domain with circular filaments to draw suitable comparisons. The range of variation in characteristic parameters across the domain between the two different configurations is determined. It was concluded that ignoring the elliptical projection of circular filaments to the flow direction, can introduce significant margin of error in the estimation of mass transfer coefficient.

Sign in / Sign up

Export Citation Format

Share Document