Driver Steering Control and a New Perspective on Car Handling Qualities

Author(s):  
R S Sharp

The article is about steering control of cars by drivers, concentrating on following the lateral profile of the roadway, which is presumed visible ahead of the car. It builds on previously published work, in which it was shown how the driver's preview of the roadway can be combined with the linear dynamics of a simple car to yield a problem of discrete-time optimal-linear-control-theory form. In that work, it was shown how an optimal ‘driver’ of a linear car can convert the path preview sample values, modelled as deriving from a Gaussian white-noise process, into steering wheel displacement commands to cause the car to follow the previewed path with an attractive compromise between precision and ease. Recognizing that real roadway excitation is not so rich in high frequencies as white-noise, a low-pass filter is added to the system. The white-noise sample values are filtered before being seen by the driver. Numerical results are used to show that the optimal preview control is unaltered by the inclusion of the low-pass filter, whereas the feedback control is affected diminishingly as the preview increases. Then, using the established theoretical basis, new results are generated to show time-invariant optimal preview controls for cars and drivers with different layouts and priorities. Tight and loose controls, representing different balances between tracking accuracy and control effort, are calculated and illustrated through simulation. A new performance criterion with handling qualities implications is set up, involving the minimization of the preview distance required. The sensitivities of this distance to variations in the car design parameters are calculated. The influence of additional rear wheel steering is studied from the viewpoint of the preview distance required and the form of the optimal preview gain sequence. Path-following simulations are used to illustrate relatively high-authority and relatively low-authority control strategies, showing manoeuvring well in advance of a turn under appropriate circumstances. The results yield new insights into driver steering control behaviour and vehicle design optimization. The article concludes with a discussion of research in progress aimed at a further improved understanding of how drivers control their vehicles.

Frequenz ◽  
2017 ◽  
Vol 71 (7-8) ◽  
Author(s):  
Ashish Kumar ◽  
Dilip Kumar Choudhary ◽  
Raghvendra Kumar Chaudhary

AbstractIn this paper, a compact via-free low pass filter is designed based on composite right/left handed (CRLH) concept. The structure uses open ended concept. Rectangular slots are etched on signal transmission line (TL) to suppress the spurious band without altering the performance and size of filter. The filter is designed for low pass frequency band with cut-off frequency of 3.5 GHz. The proposed metamaterial structure has several prominent advantages in term of selectivity up to 34 dB/GHz and compactness with average insertion loss less than 0.4 dB. It has multiple applications in wireless communication (such as GSM900, global navigation satellite system (1.559–1.610 GHz), GSM1800, WLAN/WiFi (2.4–2.49 GHz) and WiMAX (2.5–2.69 GHz)). The design parameters have been measured and compared with the simulated results and found excellent agreement. The electrical size of proposed filter is 0.14λ


2012 ◽  
Vol 204-208 ◽  
pp. 2942-2946 ◽  
Author(s):  
Le Wang ◽  
Zhi Chun Yang

The inner product vector (IPV) was proposed in our previous research as a damage detection algorithm which uses cross correlation functions between vibration responses under band pass white noise excitation. It was verified that the IPV of a structure is a weighted summation of the mode shapes of the structure and the weighing factors for each modes are different. Structural damage detection examples in our previous research shown that the damage location can be correctly detected if the bandwidth of the band pass white noise excitation only covers the fundamental natural frequency of the structure. However, the bandwidth of the band pass white noise excitation may cover first several natural frequencies of the structure in practice. This paper just investigates the damage detection method using IPV under the situation when the bandwidth of the band pass white noise excitation may cover first several natural frequencies of the structure, i.e. the hybrid method using IPV and low pass filter technique. Firstly, the theory of IPVs and the damage detection method using IPV are reviewed shortly. Then, the hybrid method using IPV and low pass filter technique is introduced. Finally, experimental damage detection example of a shear frame structure is presented to illustrate the method proposed in this paper.


2017 ◽  
Vol E100.C (10) ◽  
pp. 858-865 ◽  
Author(s):  
Yohei MORISHITA ◽  
Koichi MIZUNO ◽  
Junji SATO ◽  
Koji TAKINAMI ◽  
Kazuaki TAKAHASHI

2016 ◽  
Vol 15 (12) ◽  
pp. 2579-2586
Author(s):  
Adina Racasan ◽  
Calin Munteanu ◽  
Vasile Topa ◽  
Claudia Pacurar ◽  
Claudia Hebedean

Author(s):  
Nanan Chomnak ◽  
Siradanai Srisamranrungrueang ◽  
Natapong Wongprommoon
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document