Experimental and numerical investigation of the flow field in a high-pressure centrifugal compressor impeller near surge

2009 ◽  
Vol 223 (6) ◽  
pp. 657-666 ◽  
Author(s):  
N Bulot ◽  
I Trébinjac ◽  
X Ottavy ◽  
P Kulisa ◽  
G Halter ◽  
...  
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Laser Doppler Anemometry ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Experimental Investigations ◽  
Compressor Stage ◽  
Peak Efficiency ◽  
Vaned Diffuser

Numerical and experimental investigations were conducted in a transonic centrifugal compressor stage composed of a backswept splittered unshrouded impeller and a vaned diffuser. The present article focuses on the results obtained within the impeller, at an operating condition close to the surge of the compressor. The experimental results were obtained from a laser Doppler anemometry investigation. Unsteady numerical simulations of the compressor stage were performed using a three-dimensional Reynolds-averaged Navier—Stokes code with a phase-lagged technique, at both peak efficiency and close to surge operating conditions. A good agreement between the experiments and simulations were obtained, which justifies the use of the computational fluid dynamics results for the comparison of the flow field at both operating conditions (peak efficiency and near surge). Even if the change in flow field within the impeller from peak efficiency to near surge looked to be gradual, an overall rotation of the whole flow in the blade passages led to a non-homogeneous flow at the impeller exit in terms of angle and velocity level. Therefore, the vaned diffuser has to tolerate upstream flows, which are all the more distorted as the operating point moves towards surge.

Design and Off-Design Numerical Investigation of a Transonic Double-Splitter Centrifugal Compressor

2008 ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Seiichi Ibaraki
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Cross Sections ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Complex Flow ◽  
Flow Measurements ◽  
Vaned Diffuser

The flow field of a high pressure ratio centrifugal compressor for turbocharger applications is investigated using a three-dimensional Navier-Stokes solver. The compressor is composed of a double-splitter impeller followed by a vaned diffuser. The flow field of the transonic open-shrouded impeller is highly three-dimensional, and it is influenced by shock waves, tip leakage vortices and secondary flows. Their interactions generate complex flow structures which are convected and distorted through the impeller blades. Both steady and unsteady computations are performed in order to understand the physical mechanisms which govern the impeller flow field while the operation ranges from choke to surge. Detailed Laser Doppler Velocimetry (LDV) flow measurements are available at various cross-sections inside the impeller blades at both design and off-design operating conditions.

PIV Investigation of a High Speed Centrifugal Compressor Diffuser: Spanwise and Loading Variations

2008 ◽  
Author(s):  
Beni Cukurel ◽  
Patrick B. Lawless ◽  
Sanford Fleeter
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Vaned Diffuser ◽  
Operation Conditions ◽  
Diffuser Flow ◽  
Transonic Centrifugal Compressor ◽  
Flow Features

An efficient diffuser is essential to a modern compressor stage, due to its significance in stage performance, durability and operability. To address the need for data that describe the complex, unsteady flow field in a vaned diffuser, Particle Image Velocity is utilized to characterize the spanwise and circumferential variations of the flow features in the vaned diffuser passage of a transonic centrifugal compressor. The spanwise variation in the diffuser flow field is further investigated by comparison of 3 different operating conditions representative of low, nominal and high loading. These data demonstrate that not only the diffuser flow field is highly dependent on the operation conditions, e.g. hub-to-shroud variation increases with loading, but also the circumferential periodicity, created by the highly three dimensional impeller discharge flow, generates a larger unsteadiness towards the hub region of the vaned diffuser.

Numerical Analysis of the Vaned Diffuser of a Transonic Centrifugal Compressor

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Seiichi Ibaraki
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Flow Measurements ◽  
Vaned Diffuser ◽  
High Pressure Ratio ◽  
Unsteady Interaction ◽  
Inlet Conditions

A three-dimensional Navier–Stokes solver is used to investigate the flow field of a high pressure ratio centrifugal compressor for turbocharger applications. Such a compressor consists of a double-splitter impeller followed by a vaned diffuser. Particular attention is focused on the analysis of the vaned diffuser, designed for high subsonic inlet conditions. The diffuser is characterized by a complex three-dimensional flow field and influenced by the unsteady interaction with the impeller. Detailed particle image velocimetry flow measurements within the diffuser are available for comparison purposes.

Numerical Analysis of the Vaned Diffuser of a Transonic Centrifugal Compressor

2007 ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Seiichi Ibaraki
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Flow Measurements ◽  
Vaned Diffuser ◽  
High Pressure Ratio ◽  
Unsteady Interaction ◽  
Inlet Conditions

A three-dimensional Navier-Stokes solver is used to investigate the flow field of a high pressure ratio centrifugal compressor for turbocharger applications. Such a compressor consists of a double-splitter impeller followed by a vaned diffuser. Particular attention is focused on the analysis of the vaned diffuser, designed for high subsonic inlet conditions. The diffuser is characterized by a complex three-dimensional flow field, and influenced by the unsteady interaction with the impeller. Detailed Particle Image Velocimetry (PIV) flow measurements within the diffuser are available for comparison purposes.

Particle Image Velocity Investigation of a High Speed Centrifugal Compressor Diffuser: Spanwise and Loading Variations

2010 ◽  
Vol 132 (2) ◽  
Author(s):  
Beni Cukurel ◽  
Patrick B. Lawless ◽  
Sanford Fleeter
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Particle Image ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Vaned Diffuser ◽  
Image Velocity ◽  
Operation Conditions ◽  
Diffuser Flow

An efficient diffuser is essential to a modern compressor stage due to its significance in stage performance, durability, and operability. To address the need for data that describe the complex, unsteady flow field in a vaned diffuser, particle image velocity is utilized to characterize the spanwise and circumferential variations in the flow features in the vaned diffuser passage of a transonic centrifugal compressor. The spanwise variation in the diffuser flow field is further investigated by the comparison of three different operating conditions representative of low, nominal, and high loading. These data demonstrate that not only the diffuser flow field is highly dependent on the operation conditions, e.g., hub-to-shroud variation increases with loading, but also the circumferential periodicity, created by the highly three dimensional impeller discharge flow, generates a larger unsteadiness toward the hub region of the vaned diffuser.

Experimental and Numerical Investigation of Stator Exit Flow Field of an Automotive Torque Converter

1996 ◽  
Vol 118 (4) ◽  
pp. 835-843 ◽  
Author(s):  
B. V. Marathe ◽  
B. Lakshminarayana ◽  
Y. Dong
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Numerical Investigation ◽  
Three Dimensional ◽  
Axial Flow ◽  
Torque Converter ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Complex Flow ◽  
Rate Of Decay

The objective of this investigation is to understand the nature of the complex flow field inside each element of the torque converter through a systematic experimental and numerical investigation of the flow field. A miniature five-hole probe was used to acquire the data at the exit of the stator at several operating conditions. The flow field is found to be highly three dimensional with substantial flow deviations, and secondary flow at the exit of the stator. The secondary flow structure, caused by the upstream radial variation of the through flow, induces flow overturning near the core. Flow separation near the shell causes flow underturning in this region. The rate of decay of stator wake is found to be slower than that observed in the wakes of axial flow turbine nozzles. The flow predictions by a Navier–Stokes code are in good agreement with the pressure and the flow field measured at the exit of the stator at the design and the off-design conditions.

Surge Inception in a Transonic Centrifugal Compressor Stage

2011 ◽  
Author(s):  
Isabelle Tre´binjac ◽  
Nicolas Bulot ◽  
Xavier Ottavy ◽  
Nicolas Buffaz
Keyword(s):  
Centrifugal Compressor ◽  
Short Wavelength ◽  
Stokes Equations ◽  
Pressure Sensors ◽  
Experimental Investigations ◽  
Compressor Stage ◽  
Vaned Diffuser ◽  
Choked Flow ◽  
Centrifugal Compressor Stage ◽  
Transonic Centrifugal Compressor

Numerical and experimental investigations were conducted in a transonic centrifugal compressor stage composed of a backswept splittered unshrouded impeller and a vaned diffuser. Unsteady 3D simulations were performed with the code elsA that solves the turbulent averaged Navier-Stokes equations, at three operating points: choked flow, peak efficiency and near surge. Unsteady pressure measurements up to 150 kHz were carried out in the entry zone of the vaned diffuser (in the vaneless space and in the semi-vaneless space) when the compressor came into surge. These static pressure sensors were mounted on the shroud enwall. The paper focuses on the vaneless and semi-vaneless space where the surge originates. A detailed analysis of the flow pattern coming from the unsteady computations from choked flow towards surge led to identify the physical mechanisms involved in the surge inception. It is shown that, when approaching surge, the flow is destabilized by a severe modification of the shock system in the vaned diffuser inlet. The first perturbation is acquired from the transducer located just upstream of the shock foot (i.e. on the vane suction side surface), indicating a movement of the shock towards the vaneless space. This perturbation travels upstream and leads to the strongest short-wavelength perturbation acquired from the transducer located just upstream of the vane leading edge. This strongest short-wavelength perturbation which level may reach almost four times the mean exit pressure value triggers the full scale instability.

Experimental Investigation of the Flow in the Pipe Diffuser of a Centrifugal Compressor Stage Under Selected Parameter Variations

2009 ◽  
Author(s):  
Uwe Zachau ◽  
Reinhard Niehuis ◽  
Herwart Hoenen ◽  
David C. Wisler
Keyword(s):  
Centrifugal Compressor ◽  
Measurement Techniques ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Test Facility ◽  
Experimental Investigations ◽  
Pressure Side ◽  
Compressor Stage ◽  
Diffuser Flow ◽  
Parameter Variations

On a centrifugal compressor test facility various experimental investigations have been carried out contributing a valuable gain in knowledge on the fundamental flow physics within passage type diffusers. An extensive measurement series using various steady, unsteady and laser optical measurement techniques has been performed to detect the unsteady, highly three dimensional diffuser flow under various realistic operating conditions. Zachau et al. [1] presented the test facility and the results gathered under nominal conditions. As a follow-up the results of investigated parameter variations are now presented, covering bleed variations, impeller tip clearance and impeller-diffuser misalignment studies. The data is compared to the benchmark created from the nominal baseline data sets and evaluated with respect to the compressor stage performance. Zachau et al. [1] found that under nominal conditions the flow in the pipe diffuser separates on the pressure side in the first half of the pipe. In the last 30% of the pipe hardly any deceleration of the flow takes place. From this, special attention is given to the investigated parameter variations regarding a first proposal for a diffuser design change, which consists in shortening the diffuser. The results for each parameter variation are evaluated in detail in direct comparison to the nominal baseline configuration underlining the conclusion made earlier that the diffuser flow always separates on the pressure side with negligible deceleration in the last third of the diffusing pipe.

Computational and experimental investigations in a cyclone dust separator

1997 ◽  
Vol 211 (4) ◽  
pp. 247-257 ◽  
Author(s):  
S M Fraser ◽  
A M Abdel-Razek ◽  
M Z Abdullah
Keyword(s):  
Flow Field ◽  
Richardson Number ◽  
Swirling Flow ◽  
Laser Doppler Anemometry ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Experimental Results ◽  
Experimental Investigations ◽  
Cyclone Chamber ◽  
Dust Separator

Three-dimensional turbulent flow in a model cyclone has been simulated using PHOENICS code and experimental studies carried out using a laser Doppler anemometry (LDA) system. The experimental results were used to validate the computed velocity distributions based on the standard and a modified k-∊ model. The standard k-∊ model was found to be unsatisfactory for the prediction of the flow field inside the cyclone chamber. By considering the strong swirling flow and the streamlined curvature, a k-∊ model, modified to take account of the Richardson number, provided better velocity distributions and better agreement with the experimental results.

On the Influence of the Diffuser Inlet Shape on the Performance of a Centrifugal Compressor Stage

1983 ◽  
Author(s):  
K. Bammert ◽  
M. Jansen ◽  
M. Rautenberg
Keyword(s):  
Experimental Study ◽  
Flow Field ◽  
Centrifugal Compressor ◽  
Field Measurements ◽  
Single Stage ◽  
Compressor Stage ◽  
Vaned Diffuser ◽  
Centrifugal Compressor Stage ◽  
Essential Components

Results from an experimental study of the influence of the diffuser inlet shape on the performance of the diffuser and the whole compressor stage are presented. The investigations were carried out using a single stage centrifugal compressor. Three different vaned diffusers were tested. From detailed flow field measurements the influence of the diffuser inlet shape on the performance of the essential components of the compressor stage, i.e. the impeller, the diffuser, and the collecting chamber was analyzed. It is shown that the reaction of the vaned diffuser on the efficiency of the impeller is only weak but the losses in the collecting chamber are considerably affected by the used diffuser types.

Sign in / Sign up

Export Citation Format

Share Document