Microtopographic Influence of Nominally Flat Metallic Surfaces upon Their Thermally Reflective Behaviour

1977 ◽  
Vol 19 (2) ◽  
pp. 65-75
Author(s):  
P. W. O'Callaghan ◽  
S. D. Probert

The total reflectivity as well as the spatial distribution of the reflected energy is influenced by the topography of the reflecting surface. It has been commonly, but mistakenly, assumed that the angular variation of thermal radiation reflected from real surfaces has a directional distribution that falls between the diffuse and specular limits. For roughened surfaces, maxima in the reflected, total, radiant-intensity vector distribution occur at viewing directions other than at the angle of specular reflection, even when the mean optical roughness (i.e. r.m.s. roughness divided by wavelength of the incident radiation) is less than unity. Off-specular phenomena occur if the product of the mean normalized absolute surface slope and the predominant radiation wavelength is smaller than about 12. The magnitude of the off-specular angle is then a function of the mean surface slope, the r.m.s. roughness, the predominant wavelength of the incident radiation and its angle of incidence.

2021 ◽  
Vol 9 ◽  
Author(s):  
Franciele Carlesso ◽  
Luis E. A. Vieira ◽  
Luiz A. Berni ◽  
Graziela da S. Savonov

Absolute radiometers are based on electrical substitution radiometers, which compare optical and electrical power. The same physical principle applies to standard reference detectors operating at cryogenic temperatures and room temperature radiometers for total solar irradiance (TSI) measurements. Both types rely on the cavity with an internal low-reflectance coating to absorb incident radiation similar to a black body. The cavity shape design requires an analysis of the coating reflection properties. Like many materials, ultra-black Ni-P exhibits a mixture of diffuse and specular reflection that depends on the angle of incidence of light in the pores. We employed ray-tracing software to study the impact of the geometry on the absorptivity and distribution of the scattered rays. We describe the scattering model of the black coating in terms of the bidirectional reflectance distribution function. Also, we examined the difficulties of Ni-P electroless deposition and blackening inside the cavity. The measured absorptance of the cavity showed some discrepancies of the simulated absorptance mostly probably due to Ni-P non-uniformity coating.


The paper presents thorough theoretical and numerical analysis of the anomalies accompanying light diffraction on periodical structures (gratings). We have developed appropriate theoretical approach allowing to consider strong anomalous effects. Obtained results are presented in the form of analytical expressions for the quntities of interest, both diffracted field amplitudes and the outgoing waves energy fluxes. It is proved existence of the fluxes extrema at the specific grazing angle of incidenceб or wavelength. Namely, the specular reflection can be suppressed even for rather shallow gratings up to approximately total suppression.This effect is accompanied by essential energy redistribution between all outgoing waves depending on the grating profile. It is of essence that the energy maxima exist in all nonspecular diffraction orders at the same point (angle, wavelength) as the minimal specular reflectivity. For small period gratings, such that there do not exist other outgoing waves except the specular one, the reflectance minimum is attended by approximately total absorption of the incident radiation. Thus, we show that the grazing anomaly (GA) can be accompanied by redirection of the incident wave energy into nonspecular diffraction channels and into absorption. The results are applicable in the wide spectral region, from visible and near-infrared to terahertz and high-frequency regions for metals and semiconductors with high permittivity. The anomaly considered is well expressed for high electromagnetic contrast of the adjacent media, say, air and metal or semiconductor. Then the high contrast is due to the high value of the metal/semiconductor dielectric permittivity  ,  1 , and the anomaly corresponds to incidence of TM polarized wave. It is shown that the grazing anomaly (GA) is of rather general type and can take place if other than the specular diffraction order experiencies grazing propagation also. This property follows from the results obtained by strict application of the optical reciprocity theorem to the geometry under consideration. The specific case of harmonic relief grating is discussed in detail. It is demomstrated existence of the characteristic inclination, cr a , of the relief inclinatuion for the grating period comparable with the incident radiation wavelength, 1 cr a  , where  stays for the surface impedance,  1  . The condition cr a a , or greater, corresponds to highly expressed GA. The theoretical results are illustrated by numerical applications to gratings on Cu\vacuum (air) interface in THz region. The results obtained can be simply transferred to the TE polarized waves. For this we have to consider the adjacent media with high contrast magnetic properties, i.e., high value of the magnetic permeability  ,  1 . This case is of high interest for nowaday applications in nanophotonics and metamaterials development. As compared with other anomalies GA is attributed to the resonance-type behaviour of the energy flux, not wave amplitudes, the latter change monotonically within this anomaly contrary to the well known Rayleigh and resonance anomalies, where the wave amplitude experiences fast nonmonotonous dependence on the angle of incidence and wavelength.


1964 ◽  
Vol 86 (2) ◽  
pp. 193-199 ◽  
Author(s):  
R. C. Birkebak ◽  
E. M. Sparrow ◽  
E. R. G. Eckert ◽  
J. W. Ramsey

Measurements have been made of the hemispherical and specular reflectance of metallic surfaces of controlled roughness. The surfaces, which were ground nickel rectangles, were irradiated at various angles of incidence by a beam of black-body radiation, the temperature of which was also varied. The instrumentation which was devised to perform the experiments is described. The measurements show that beyond a certain surface roughness, the hemispherical reflectance is virtually independent of further increases in roughness. On the other hand, the specular reflectance decreases steadily with increasing roughness. Additionally, the hemispherical reflectance is found to be quite insensitive to the angle of incidence, while the specular reflectance increases with angle of incidence for the rougher surfaces.


2021 ◽  
Author(s):  
Andriy E. Serebryannikov ◽  
Diana C. Skigin ◽  
Guy A. E. Vandenbosch ◽  
Ekmel Ozbay

Abstract The concept of multifunctional reflection-mode gratings based on rod-type photonic crystals with C2 symmetry is introduced and examined. The specific modal properties lead to the vanishing dependence of the first-negative-order maximum on the angle of incidence within a wide range, and the nearly sinusoidal redistribution of the incident-wave energy between zero order (specular reflection) and first negative diffraction order (deflection) at frequency variation that are the key features enabling various functionalities in one structure and functionality merging. The elementary functionalities offered by the studied structures, of which multifunctional scenarios can be designed, include but are not restricted to multiband spatial filtering, multiband splitting, and demultiplexing. The proposed structures are shown to be capable in multifunctional operation in case of an obliquely incident polychromatic wave. The generalized demultiplexing is demonstrated for the case when several polychromatic wavesare incident at different angles. The same deflection properties yield multiband splitting, and merging demultiplexing and splitting functionalties in one functionality, which may contribute to various multifunctional scenarios. The proposed gratings arealso studied in transmissive configuration.


2021 ◽  
Vol 10 (1) ◽  
pp. 63-70
Author(s):  
Felix Lehner ◽  
Jürgen Roth ◽  
Oliver Hupe ◽  
Marc Kassubeck ◽  
Benedikt Bergmann ◽  
...  

Abstract. This paper presents a method of how to determine spatial angles of ionizing radiation incidence quickly, using a Timepix3 detector. This work focuses on the dosimetric applications where detectors and measured quantities show significant angle dependencies. A determined angle of incidence can be used to correct for the angle dependence of a planar Timepix3 detector. Up until now, only passive dosemeters have been able to provide a correct dose and preserve the corresponding incidence angle of the radiation. Unfortunately, passive dosemeters cannot provide this information in “real” time. In our special setup we were able to retrieve the spatial angles with a runtime of less than 600 ms. Employing the new Timepix3 detector enables the use of effective data analysis where the direction of incident radiation is computed from a simple photon event map. In order to obtain this angle, we combine the information extracted from the map with known 3D geometry surrounding the detector. Moreover, we analyze the computation time behavior, conditions and optimizations of the developed spatial angle calculation algorithm.


2022 ◽  
Vol 14 (2) ◽  
pp. 247
Author(s):  
Zbigniew Otremba ◽  
Jacek Piskozub

The article presents the results of simulations that take into account the optical parameters of the selected sea region (from literature data on the southern Baltic Sea) and two optically extreme types of crude oil (from historical data) which exist in the form of a highly watered-down oil-in-water emulsion (10 ppm). The spectral index was analyzed based on the results of modeling the radiance reflectance distribution for almost an entire hemisphere of the sky (zenith angle from 0 to 80°). The spectral index was selected and is universal for all optically different types of oil (wavelengths of 650 and 412 nm). The possibility of detecting pollution in the conditions of the wavy sea surface (as a result of wind of up to 10 m/s) was studied. It was also shown that if the viewing direction is close to a direction perpendicular to the sea surface, observations aimed at determining the spectral index are less effective than observations under the zenith angle of incidence of sunlight for all azimuths excluding the direction of sunlight’s specular reflection.


1961 ◽  
Vol 3 (30) ◽  
pp. 1017-1044 ◽  
Author(s):  
Chester C. Langway

AbstractTwelve deep pits (5 to 5.5 m.) revealed between 6 and 13 years of snow accumulation. The results show an average net accumulation of 18.5 g./cm.2per year. Accumulation decreases inland at a mean rate of 1.5 g./cm.2per 100 m. rise in elevation. Temperature measurements at 100 m. in all pits give a mean temperature-altitude gradient of 0.77° C. per 100 m. Evidence of melt was observed in all pits, the most pronounced melt occurring in 1954. The mean density reflects the local climate. Other empirical correlations of these data show linear trends that vary systematically with surface slope and local climate.


1968 ◽  
Vol 23 (2) ◽  
pp. 274-279 ◽  
Author(s):  
E. W. Becker ◽  
R. Klingelhöfer ◽  
H. Mayer

The reflection of a beam of nitrogen clusters from a polished stainless steel surface is investigated. The scattered flux shows a strong maximum at an angle of reflection almost 90°, independent of angle of incidence. The mean velocity of the reflected beam is about equal to the tangential velocity component of the incident beam. Measurements with increased background pressure demonstrate that the reflected beam still consists essentially of clusters.


An examination is made of the theoretical basis and simplifying assumptions governing the use of the voltage measured across the ends of a submarine cable as a measure of the sea flow across the cable section. In part I a method of calculating the response of an electro-magnetic flowmeter by means of a weight vector is applied to the oceanographic situation. A numerical model is developed which generates the weight vector distribution for given submarine cables. In part II, weight vector distributions are obtained for various cables around the British Isles, and the cable responses to given velocity distributions in the sea are calculated. It is shown that the velocity distributions associated with different tidal frequencies, storm surges and long period residual flows will result in different responses at a given cable. The implications of this are discussed. The effect on the cable response of seasonally varying sea conductivity, and of a tidal range which is not negligible compared with the mean depth, is also modelled.


1968 ◽  
Vol 23 (12) ◽  
pp. 1988-1994
Author(s):  
H. Zeidl ◽  
H. Baier

The Monte Carlo method is applied to investigate the penetration of fast electron through thin foils of matter. The “step by step method” is used. Energy loss and secondary electron emission are taken into account. As an example for the possible application of the computational program we calculated “refraction” and “reflection” of relativistic electrons on thin Al-foils. Scattering and reflection depends significantly on the energy loss of the electrons in the foil. The “mean scattering angle” of the electron beam (with respect to the foil normal) has been shown to be smaller than the angle of incidence (with respect to the foil normal). Possible experimental methods to test the predictions on mean scattering and reflection angles (as defined in this paper) are discussed.


Sign in / Sign up

Export Citation Format

Share Document