scholarly journals Multifunctional Gratings for Multiband Spatial Filtering, Retroreflection, Splitting and Demultiplexing Based on C2 Symmetric Photonic Crystals

Author(s):  
Andriy E. Serebryannikov ◽  
Diana C. Skigin ◽  
Guy A. E. Vandenbosch ◽  
Ekmel Ozbay

Abstract The concept of multifunctional reflection-mode gratings based on rod-type photonic crystals with C2 symmetry is introduced and examined. The specific modal properties lead to the vanishing dependence of the first-negative-order maximum on the angle of incidence within a wide range, and the nearly sinusoidal redistribution of the incident-wave energy between zero order (specular reflection) and first negative diffraction order (deflection) at frequency variation that are the key features enabling various functionalities in one structure and functionality merging. The elementary functionalities offered by the studied structures, of which multifunctional scenarios can be designed, include but are not restricted to multiband spatial filtering, multiband splitting, and demultiplexing. The proposed structures are shown to be capable in multifunctional operation in case of an obliquely incident polychromatic wave. The generalized demultiplexing is demonstrated for the case when several polychromatic wavesare incident at different angles. The same deflection properties yield multiband splitting, and merging demultiplexing and splitting functionalties in one functionality, which may contribute to various multifunctional scenarios. The proposed gratings arealso studied in transmissive configuration.

Nanophotonics ◽  
2020 ◽  
Vol 9 (15) ◽  
pp. 4589-4600
Author(s):  
Majid Aalizadeh ◽  
Andriy E. Serebryannikov ◽  
Ekmel Ozbay ◽  
Guy A. E. Vandenbosch

AbstractDeflection, a basic functionality of wavefront manipulation is usually associated with the phase-gradient metasurfaces and the classical blazed gratings. We numerically and experimentally demonstrate an unusually wideband and simultaneously wide-angle deflection achieved at near-infrared in reflection mode for a periodic (nongradient), ultrathin meta-array comprising only one silicon nanorod (Mie resonator) per period. It occurs in the range where only the first negative diffraction order and zero order may propagate. Deflection serves as the enabler for multifunctional operation. Being designed with the main goal to obtain ultra-wideband and wide-angle deflection, the proposed meta-array is also capable in spatial filtering and wide-angle splitting. Spatial filtering of various types can be obtained in one structure by exploiting either deflection in nonzero diffraction orders, or the specular-reflection (zero-order) regime. Thus, the role of different diffraction orders is clarified. Moreover, on–off switching of deflection and related functionalities is possible by changing polarization state of the incident wave. The suggested device is simple to fabricate and only requires cost-effective materials, so it is particularly appropriate for the large-area fabrication using nanoprint lithography. Ultra-wideband wide-angle and other deflection scenarios, along with the other functionalities, are promising for applications in optical communications, laser optics, sensing, detection, and imaging.


The paper presents thorough theoretical and numerical analysis of the anomalies accompanying light diffraction on periodical structures (gratings). We have developed appropriate theoretical approach allowing to consider strong anomalous effects. Obtained results are presented in the form of analytical expressions for the quntities of interest, both diffracted field amplitudes and the outgoing waves energy fluxes. It is proved existence of the fluxes extrema at the specific grazing angle of incidenceб or wavelength. Namely, the specular reflection can be suppressed even for rather shallow gratings up to approximately total suppression.This effect is accompanied by essential energy redistribution between all outgoing waves depending on the grating profile. It is of essence that the energy maxima exist in all nonspecular diffraction orders at the same point (angle, wavelength) as the minimal specular reflectivity. For small period gratings, such that there do not exist other outgoing waves except the specular one, the reflectance minimum is attended by approximately total absorption of the incident radiation. Thus, we show that the grazing anomaly (GA) can be accompanied by redirection of the incident wave energy into nonspecular diffraction channels and into absorption. The results are applicable in the wide spectral region, from visible and near-infrared to terahertz and high-frequency regions for metals and semiconductors with high permittivity. The anomaly considered is well expressed for high electromagnetic contrast of the adjacent media, say, air and metal or semiconductor. Then the high contrast is due to the high value of the metal/semiconductor dielectric permittivity  ,  1 , and the anomaly corresponds to incidence of TM polarized wave. It is shown that the grazing anomaly (GA) is of rather general type and can take place if other than the specular diffraction order experiencies grazing propagation also. This property follows from the results obtained by strict application of the optical reciprocity theorem to the geometry under consideration. The specific case of harmonic relief grating is discussed in detail. It is demomstrated existence of the characteristic inclination, cr a , of the relief inclinatuion for the grating period comparable with the incident radiation wavelength, 1 cr a  , where  stays for the surface impedance,  1  . The condition cr a a , or greater, corresponds to highly expressed GA. The theoretical results are illustrated by numerical applications to gratings on Cu\vacuum (air) interface in THz region. The results obtained can be simply transferred to the TE polarized waves. For this we have to consider the adjacent media with high contrast magnetic properties, i.e., high value of the magnetic permeability  ,  1 . This case is of high interest for nowaday applications in nanophotonics and metamaterials development. As compared with other anomalies GA is attributed to the resonance-type behaviour of the energy flux, not wave amplitudes, the latter change monotonically within this anomaly contrary to the well known Rayleigh and resonance anomalies, where the wave amplitude experiences fast nonmonotonous dependence on the angle of incidence and wavelength.


Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Manvika Singh ◽  
Rudi Santbergen ◽  
Indra Syifai ◽  
Arthur Weeber ◽  
Miro Zeman ◽  
...  

Abstract Since single junction c-Si solar cells are reaching their practical efficiency limit. Perovskite/c-Si tandem solar cells hold the promise of achieving greater than 30% efficiencies. In this regard, optical simulations can deliver guidelines for reducing the parasitic absorption losses and increasing the photocurrent density of the tandem solar cells. In this work, an optical study of 2, 3 and 4 terminal perovskite/c-Si tandem solar cells with c-Si solar bottom cells passivated by high thermal-budget poly-Si, poly-SiOx and poly-SiCx is performed to evaluate their optical performance with respect to the conventional tandem solar cells employing silicon heterojunction bottom cells. The parasitic absorption in these carrier selective passivating contacts has been quantified. It is shown that they enable greater than 20 mA/cm2 matched implied photocurrent density in un-encapsulated 2T tandem architecture along with being compatible with high temperature production processes. For studying the performance of such tandem devices in real-world irradiance conditions and for different locations of the world, the effect of solar spectrum and angle of incidence on their optical performance is studied. Passing from mono-facial to bi-facial tandem solar cells, the photocurrent density in the bottom cell can be increased, requiring again optical optimization. Here, we analyse the effect of albedo, perovskite thickness and band gap as well as geographical location on the optical performance of these bi-facial perovskite/c-Si tandem solar cells. Our optical study shows that bi-facial 2T tandems, that also convert light incident from the rear, require radically thicker perovskite layers to match the additional current from the c-Si bottom cell. For typical perovskite bandgap and albedo values, even doubling the perovskite thickness is not sufficient. In this respect, lower bandgap perovskites are very interesting for application not only in bi-facial 2T tandems but also in related 3T and 4T tandems.


Author(s):  
Piotr Łuczyński ◽  
Dennis Toebben ◽  
Manfred Wirsum ◽  
Wolfgang F. D. Mohr ◽  
Klaus Helbig

In recent decades, the rising share of commonly subsidized renewable energy especially affects the operational strategy of conventional power plants. In pursuit of flexibility improvements, extension of life cycle, in addition to a reduction in start-up time, General Electric has developed a product to warm-keep high/intermediate pressure steam turbines using hot air. In order to optimize the warm-keeping operation and to gain knowledge about the dominant heat transfer phenomena and flow structures, detailed numerical investigations are required. Considering specific warm-keeping operating conditions characterized by high turbulent flows, it is required to conduct calculations based on time-consuming unsteady conjugate heat transfer (CHT) simulations. In order to investigate the warm-keeping process as found in the presented research, single and multistage numerical turbine models were developed. Furthermore, an innovative calculation approach called the Equalized Timescales Method (ET) was applied for the modeling of unsteady conjugate heat transfer (CHT). The unsteady approach improves the accuracy of the stationary simulations and enables the determination of the multistage turbine models. In the course of the research, two particular input variables of the ET approach — speed up factor (SF) and time step (TS) — have been additionally investigated with regard to their high impact on the calculation time and the quality of the results. Using the ET method, the mass flow rate and the rotational speed were varied to generate a database of warm-keeping operating points. The main goal of this work is to provide a comprehensive knowledge of the flow field and heat transfer in a wide range of turbine warm-keeping operations and to characterize the flow patterns observed at these operating points. For varying values of flow coefficient and angle of incidence, the secondary flow phenomena change from well-known vortex systems occurring in design operation (such as passage, horseshoe and corner vortices) to effects typical for windage, like patterns of alternating vortices and strong backflows. Furthermore, the identified flow patterns have been compared to vortex systems described in cited literature and summarized in the so-called blade vortex diagram. The comparison of heat transfer in the form of charts showing the variation of the Nusselt-numbers with respect to changes in angle of incidence and flow coefficients at specific operating points is additionally provided.


2021 ◽  
Author(s):  
Mohamed Hamdalla ◽  
Benjamin Bissen ◽  
James D. Hunter ◽  
Liu Yuanzhuo ◽  
Victor Khilkevich ◽  
...  

<p>In this work, we study the current coupled to a simplified Unmanned Aerial Vehicle (UAV) model using a dual computational and experimental approach. The surrogate structure reduced the computational burden and facilitated the experimental measurement of the coupled currents. For a practical system, a wide range of simulations and measurements must be performed to analyze the induced current variations with respect to the incident excitation properties such as the frequency, angle of incidence, and polarization. To simplify this analysis, Characteristic Mode Analysis (CMA) was used to compute the eigen-currents of the UAV model and predict where and under which RF excitation conditions, the coupled current is maximized. We verified these predictions using direct experimental measurement of the coupled currents. The presented simulations and measurements show the usefulness of CMA for studying electromagnetic coupling to practical systems. </p>


2021 ◽  
Author(s):  
Mohamed Hamdalla ◽  
Benjamin Bissen ◽  
James D. Hunter ◽  
Liu Yuanzhuo ◽  
Victor Khilkevich ◽  
...  

<p>In this work, we study the current coupled to a simplified Unmanned Aerial Vehicle (UAV) model using a dual computational and experimental approach. The surrogate structure reduced the computational burden and facilitated the experimental measurement of the coupled currents. For a practical system, a wide range of simulations and measurements must be performed to analyze the induced current variations with respect to the incident excitation properties such as the frequency, angle of incidence, and polarization. To simplify this analysis, Characteristic Mode Analysis (CMA) was used to compute the eigen-currents of the UAV model and predict where and under which RF excitation conditions, the coupled current is maximized. We verified these predictions using direct experimental measurement of the coupled currents. The presented simulations and measurements show the usefulness of CMA for studying electromagnetic coupling to practical systems. </p>


2022 ◽  
Vol 14 (2) ◽  
pp. 247
Author(s):  
Zbigniew Otremba ◽  
Jacek Piskozub

The article presents the results of simulations that take into account the optical parameters of the selected sea region (from literature data on the southern Baltic Sea) and two optically extreme types of crude oil (from historical data) which exist in the form of a highly watered-down oil-in-water emulsion (10 ppm). The spectral index was analyzed based on the results of modeling the radiance reflectance distribution for almost an entire hemisphere of the sky (zenith angle from 0 to 80°). The spectral index was selected and is universal for all optically different types of oil (wavelengths of 650 and 412 nm). The possibility of detecting pollution in the conditions of the wavy sea surface (as a result of wind of up to 10 m/s) was studied. It was also shown that if the viewing direction is close to a direction perpendicular to the sea surface, observations aimed at determining the spectral index are less effective than observations under the zenith angle of incidence of sunlight for all azimuths excluding the direction of sunlight’s specular reflection.


A formal integral solution is given for the problem of the reflexion of a spherical acoustic pulse by an infinite plane interface having an impedance of arbitrary dependence on frequency and angle of incidence. In many cases of practical interest the impedance may be assumed to be independent of angle of incidence, and under this assumption the integral solution is relatively easy to evaluate. A simple exact expression for the reflected pulse, in closed form, is obtained when the wall impedance is purely resistive (i.e. independent of frequency). This solution is a special case of a general type of solution of the wave equation when it is reduced to a rotationally symmetric Laplace’s equation in the ‘spherical polar’ co-ordinates [√{( ct / r ) 2 - sin 2 θ}, ( ct cos θ/ r )/ √{( ct / r ) 2 - sin 2 θ}]. To illustrate the relatively wide range of validity of the assumption of an impedance independent of angle of incidence, when applied to real materials, this exact result is compared with an approximate solution for the case where the interface separates two homogeneous isotropic lossless materials. The formal integral solution is evaluated approximately for wall impedances of the following types: (i) resistance and mass, (ii) resistance and stiffness, (iii) resistance, mass and stiffness. The solutions are compared with corresponding solutions for plane incident waves, and the behaviour of the scattered wave, distinguishing between the spherical and the plane wave, is discussed. Possible applications of the results for acoustic waves to problems in the reflexion of blast waves and of transient radiation by an electric dipole are indicated briefly.


2020 ◽  
Vol 230 ◽  
pp. 00006
Author(s):  
Paola Lova ◽  
Paolo Giusto ◽  
Francesco Di Stasio ◽  
Giovanni Manfredi ◽  
Giuseppe M. Paternò ◽  
...  

Thanks to versatile optoelectronic properties solution processable perovskites have attracted increasing interest as active materials in photovoltaic and light emitting devices. However, the deposition of perovskite thin films necessitates wide range solvents that are incompatible with many other solution-processable media, including polymers that are usually dissolved by the perovskite solvents. In this work, we demonstrate that hybrid perovskite thin films can be coupled with all polymer planar photonic crystals with different approaches to achieve emission intensity enhancement and reshaping using different approaches. The possibility to control and modify the emission spectrum of a solution processable perovskite via a simple spun-cast polymer structure is indeed of great interest in optoelectronic applications requiring high color purity or emission directionality. Furthermore, thanks to the ease of fabrication and scalability of solution-processed photonic crystals, this approach could enable industrial scale production of low-cost, large area, lightweight and flexible polymer-perovskite lighting devices, which may be tuned without resorting to compositional engineering.


2018 ◽  
Vol 10 (10) ◽  
pp. 1632 ◽  
Author(s):  
Bin Yang ◽  
Yuri Knyazikhin ◽  
Donghui Xie ◽  
Haimeng Zhao ◽  
Junqiang Zhang ◽  
...  

Interpreting remotely-sensed data requires realistic, but simple, models of radiative transfer that occurs within a vegetation canopy. In this paper, an improved version of the stochastic radiative transfer model (SRTM) is proposed by assuming that all photons that have not been specularly reflected enter the leaf interior. The contribution of leaf specular reflection is considered by modifying leaf scattering phase function using Fresnel reflectance. The canopy bidirectional reflectance factor (BRF) estimated from this model is evaluated through comparisons with field-measured maize BRF. The result shows that accounting for leaf specular reflection can provide better performance than that when leaf specular reflection is neglected over a wide range of view zenith angles. The improved version of the SRTM is further adopted to investigate the influence of leaf specular reflection on the canopy radiative regime, with emphases on vertical profiles of mean radiation flux density, canopy absorptance, BRF, and normalized difference vegetation index (NDVI). It is demonstrated that accounting for leaf specular reflection can increase leaf albedo, which consequently increases canopy mean upward/downward mean radiation flux density and canopy nadir BRF and decreases canopy absorptance and canopy nadir NDVI when leaf angles are spherically distributed. The influence is greater for downward/upward radiation flux densities and canopy nadir BRF than that for canopy absorptance and NDVI. The results provide knowledge of leaf specular reflection and canopy radiative regime, and are helpful for forward reflectance simulations and backward inversions. Moreover, polarization measurements are suggested for studies of leaf specular reflection, as leaf specular reflection is closely related to the canopy polarization.


Sign in / Sign up

Export Citation Format

Share Document