scholarly journals De novo whole-genome assembly of a wild type yeast isolate using nanopore sequencing

F1000Research ◽  
2017 ◽  
Vol 6 ◽  
pp. 618 ◽  
Author(s):  
Hans J. Jansen ◽  
Ron P. Dirks ◽  
Michael Liem ◽  
Christiaan V. Henkel ◽  
G. Paul H. van Heusden ◽  
...  
Keyword(s):  
De Novo ◽  
Sequence Data ◽  
New Technology ◽  
Whole Genome ◽  
Nanopore Sequencing ◽  
Short Read ◽  
Sequencing Technologies ◽  
Oxford Nanopore ◽  
Long Read ◽  
Wild Type Yeast

Background: The introduction of the MinIONTM sequencing device by Oxford Nanopore Technologies may greatly accelerate whole genome sequencing. It has been shown that the nanopore sequence data, in combination with other sequencing technologies, is highly useful for accurate annotation of all genes in the genome. However, it also offers great potential for de novo assembly of complex genomes without using other technologies. In this manuscript we used nanopore sequencing as a tool to classify yeast strains. Methods: We compared various technical and software developments for the nanopore sequencing protocol, showing that the R9 chemistry is, as predicted, higher in quality than R7.3 chemistry. The R9 chemistry is an essential improvement for assembly of the extremely AT-rich mitochondrial genome. Results: In this study, we used this new technology to sequence and de novo assemble the genome of a recently isolated ethanologenic yeast strain, and compared the results with those obtained by classical Illumina short read sequencing. This strain was originally named Candida vartiovaarae (Torulopsis vartiovaarae) based on ribosomal RNA sequencing. We show that the assembly using nanopore data is much more contiguous than the assembly using short read data. Conclusions: The mitochondrial and chromosomal genome sequences showed that our strain is clearly distinct from other yeast taxons and most closely related to published Cyberlindnera species. In conclusion, MinION-mediated long read sequencing can be used for high quality de novo assembly of new eukaryotic microbial genomes.

scholarly journals De novo whole-genome assembly of a wild type yeast isolate using nanopore sequencing

F1000Research ◽  
2018 ◽  
Vol 6 ◽  
pp. 618 ◽  
Author(s):  
Michael Liem ◽  
Hans J. Jansen ◽  
Ron P. Dirks ◽  
Christiaan V. Henkel ◽  
G. Paul H. van Heusden ◽  
...  
Keyword(s):  
De Novo ◽  
Sequence Data ◽  
New Technology ◽  
Whole Genome ◽  
Nanopore Sequencing ◽  
Short Read ◽  
Sequencing Technologies ◽  
Oxford Nanopore ◽  
Before And After ◽  
Long Read

Background: The introduction of the MinION sequencing device by Oxford Nanopore Technologies may greatly accelerate whole genome sequencing. Nanopore sequence data offers great potential for de novo assembly of complex genomes without using other technologies. Furthermore, Nanopore data combined with other sequencing technologies is highly useful for accurate annotation of all genes in the genome. In this manuscript we used nanopore sequencing as a tool to classify yeast strains. Methods: We compared various technical and software developments for the nanopore sequencing protocol, showing that the R9 chemistry is, as predicted, higher in quality than R7.3 chemistry. The R9 chemistry is an essential improvement for assembly of the extremely AT-rich mitochondrial genome. We double corrected assemblies from four different assemblers with PILON and assessed sequence correctness before and after PILON correction with a set of 290 Fungi genes using BUSCO. Results: In this study, we used this new technology to sequence and de novo assemble the genome of a recently isolated ethanologenic yeast strain, and compared the results with those obtained by classical Illumina short read sequencing. This strain was originally named Candida vartiovaarae (Torulopsis vartiovaarae) based on ribosomal RNA sequencing. We show that the assembly using nanopore data is much more contiguous than the assembly using short read data. We also compared various technical and software developments for the nanopore sequencing protocol, showing that nanopore-derived assemblies provide the highest contiguity. Conclusions: The mitochondrial and chromosomal genome sequences showed that our strain is clearly distinct from other yeast taxons and most closely related to published Cyberlindnera species. In conclusion, MinION-mediated long read sequencing can be used for high quality de novo assembly of new eukaryotic microbial genomes.

scholarly journals Scaffolding and Completing Genome Assemblies in Real-time with Nanopore Sequencing

2016 ◽  
Author(s):  
Minh Duc Cao ◽  
Son Hoang Nguyen ◽  
Devika Ganesamoorthy ◽  
Alysha G. Elliott ◽  
Matthew Cooper ◽  
...  
Keyword(s):  
Real Time ◽  
Sequence Data ◽  
Repetitive Sequences ◽  
Computational Method ◽  
Nanopore Sequencing ◽  
Short Read ◽  
Sequencing Technologies ◽  
Long Read ◽  
Computational Resources ◽  
Genome Assemblies

AbstractGenome assemblies obtained from short read sequencing technologies are often fragmented into many contigs because of the abundance of repetitive sequences. Long read sequencing technologies allow the generation of reads spanning most repeat sequences, providing the opportunity to complete these genome assemblies. However, substantial amounts of sequence data and computational resources are required to overcome the high per-base error rate inherent to these technologies. Furthermore, most existing methods only assemble the genomes after sequencing has completed which could result in either generation of more sequence data at greater cost than required or a low-quality assembly if insufficient data are generated. Here we present the first computational method which utilises real-time nanopore sequencing to scaffold and complete short-read assemblies while the long read sequence data is being generated. The method reports the progress of completing the assembly in real-time so users can terminate the sequencing once an assembly of sufficient quality and completeness is obtained. We use our method to complete four bacterial genomes and one eukaryotic genome, and show that it is able to construct more complete and more accurate assemblies, and at the same time, requires less sequencing data and computational resources than existing pipelines. We also demonstrate that the method can facilitate real-time analyses of positional information such as identification of bacterial genes encoded in plasmids and pathogenicity islands.

scholarly journals Comprehensive identification of transposable element insertions using multiple sequencing technologies

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Chong Chu ◽  
Rebeca Borges-Monroy ◽  
Vinayak V. Viswanadham ◽  
Soohyun Lee ◽  
Heng Li ◽  
...  
Keyword(s):  
Transposable Element ◽  
Structure And Function ◽  
Endogenous Retroviruses ◽  
Whole Genome Sequencing Data ◽  
Whole Genome ◽  
Sequencing Data ◽  
Short Read ◽  
Sequencing Technologies ◽  
Long Read ◽  
And Function

AbstractTransposable elements (TEs) help shape the structure and function of the human genome. When inserted into some locations, TEs may disrupt gene regulation and cause diseases. Here, we present xTea (x-Transposable element analyzer), a tool for identifying TE insertions in whole-genome sequencing data. Whereas existing methods are mostly designed for short-read data, xTea can be applied to both short-read and long-read data. Our analysis shows that xTea outperforms other short read-based methods for both germline and somatic TE insertion discovery. With long-read data, we created a catalogue of polymorphic insertions with full assembly and annotation of insertional sequences for various types of retroelements, including pseudogenes and endogenous retroviruses. Notably, we find that individual genomes have an average of nine groups of full-length L1s in centromeres, suggesting that centromeres and other highly repetitive regions such as telomeres are a significant yet unexplored source of active L1s. xTea is available at https://github.com/parklab/xTea.

scholarly journals Mapping and phasing of structural variation in patient genomes using nanopore sequencing

2017 ◽  
Author(s):  
Mircea Cretu Stancu ◽  
Markus J. van Roosmalen ◽  
Ivo Renkens ◽  
Marleen Nieboer ◽  
Sjors Middelkamp ◽  
...  
Keyword(s):  
Single Molecule ◽  
De Novo ◽  
Structural Variants ◽  
Human Genetic Disease ◽  
Structural Genomic ◽  
Short Read ◽  
Sequencing Technologies ◽  
Genome Wide ◽  
Long Read ◽  
Complex Structural

AbstractStructural genomic variants form a common type of genetic alteration underlying human genetic disease and phenotypic variation. Despite major improvements in genome sequencing technology and data analysis, the detection of structural variants still poses challenges, particularly when variants are of high complexity. Emerging long-read single-molecule sequencing technologies provide new opportunities for detection of structural variants. Here, we demonstrate sequencing of the genomes of two patients with congenital abnormalities using the ONT MinION at 11x and 16x mean coverage, respectively. We developed a bioinformatic pipeline - NanoSV - to efficiently map genomic structural variants (SVs) from the long-read data. We demonstrate that the nanopore data are superior to corresponding short-read data with regard to detection of de novo rearrangements originating from complex chromothripsis events in the patients. Additionally, genome-wide surveillance of SVs, revealed 3,253 (33%) novel variants that were missed in short-read data of the same sample, the majority of which are duplications < 200bp in size. Long sequencing reads enabled efficient phasing of genetic variations, allowing the construction of genome-wide maps of phased SVs and SNVs. We employed read-based phasing to show that all de novo chromothripsis breakpoints occurred on paternal chromosomes and we resolved the long-range structure of the chromothripsis. This work demonstrates the value of long-read sequencing for screening whole genomes of patients for complex structural variants.

scholarly journals Whole-Genome Sequencing of a Human Clinical Isolate of the Novel Species Klebsiella quasivariicola sp. nov

2017 ◽  
Vol 5 (42) ◽  
Author(s):  
S. Wesley Long ◽  
Sarah E. Linson ◽  
Matthew Ojeda Saavedra ◽  
Concepcion Cantu ◽  
James J. Davis ◽  
...  
Keyword(s):  
Whole Genome Sequencing ◽  
Clinical Isolate ◽  
Genome Sequencing ◽  
Novel Species ◽  
Whole Genome ◽  
The Novel ◽  
Short Read ◽  
Oxford Nanopore ◽  
Long Read

ABSTRACT In a study of 1,777 Klebsiella strains, we discovered KPN1705, which was distinct from all recognized Klebsiella spp. We closed the genome of strain KPN1705 using a hybrid of Illumina short-read and Oxford Nanopore long-read technologies. For this novel species, we propose the name Klebsiella quasivariicola sp. nov.

scholarly journals Detection of single nucleotide and copy number variants in the Fabry disease-associated GLA gene using nanopore sequencing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Albina Nowak ◽  
Omer Murik ◽  
Tzvia Mann ◽  
David A. Zeevi ◽  
Gheona Altarescu
Keyword(s):  
Fabry Disease ◽  
Copy Number ◽  
New Technology ◽  
Copy Number Variants ◽  
Cost Effective ◽  
Nanopore Sequencing ◽  
Oxford Nanopore ◽  
Long Read ◽  
Sanger Sequence ◽  
Gla Gene

AbstractMore than 900 variants have been described in the GLA gene. Some intronic variants and copy number variants in GLA can cause Fabry disease but will not be detected by classical Sanger sequence. We aimed to design and validate a method for sequencing the GLA gene using long-read Oxford Nanopore sequencing technology. Twelve Fabry patients were blindly analyzed, both by conventional Sanger sequence and by long-read sequencing of a 13 kb PCR amplicon. We used minimap2 to align the long-read data and Nanopolish and Sniffles to call variants. All the variants detected by Sanger (including a deep intronic variant) were also detected by long-read sequencing. One patient had a deletion that was not detected by Sanger sequencing but was detected by the new technology. Our long-read sequencing-based method was able to detect missense variants and an exonic deletion, with the added advantage of intronic analysis. It can be used as an efficient and cost-effective tool for screening and diagnosing Fabry disease.

scholarly journals Evaluation of Germline Structural Variant Calling Methods for Nanopore Sequencing Data

2021 ◽  
Vol 12 ◽  
Author(s):  
Davide Bolognini ◽  
Alberto Magi
Keyword(s):  
Variant Calling ◽  
Research Report ◽  
Nanopore Sequencing ◽  
Sequencing Data ◽  
Factors Affecting ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Sequencing Studies ◽  
Long Read

Structural variants (SVs) are genomic rearrangements that involve at least 50 nucleotides and are known to have a serious impact on human health. While prior short-read sequencing technologies have often proved inadequate for a comprehensive assessment of structural variation, more recent long reads from Oxford Nanopore Technologies have already been proven invaluable for the discovery of large SVs and hold the potential to facilitate the resolution of the full SV spectrum. With many long-read sequencing studies to follow, it is crucial to assess factors affecting current SV calling pipelines for nanopore sequencing data. In this brief research report, we evaluate and compare the performances of five long-read SV callers across four long-read aligners using both real and synthetic nanopore datasets. In particular, we focus on the effects of read alignment, sequencing coverage, and variant allele depth on the detection and genotyping of SVs of different types and size ranges and provide insights into precision and recall of SV callsets generated by integrating the various long-read aligners and SV callers. The computational pipeline we propose is publicly available at https://github.com/davidebolo1993/EViNCe and can be adjusted to further evaluate future nanopore sequencing datasets.

scholarly journals A chromosome-scale assembly of the sorghum genome using nanopore sequencing and optical mapping

2018 ◽  
Author(s):  
Stáphane Deschamps ◽  
Yun Zhang ◽  
Victor Llaca ◽  
Liang Ye ◽  
Gregory May ◽  
...  
Keyword(s):  
Sorghum Bicolor ◽  
De Novo ◽  
Hybrid Assembly ◽  
The Public ◽  
Sequencing Technologies ◽  
Oxford Nanopore ◽  
Long Read ◽  
Optical Maps ◽  
Eukaryotic Genomes ◽  
Direct Label

The advent of long-read sequencing technologies has greatly facilitated assemblies of large eukaryotic genomes. In this paper, Oxford Nanopore sequences generated on a MinION sequencer were combined with BioNano Genomics Direct Label and Stain (DLS) optical maps to generate a chromosome-scale de novo assembly of the repeat-rich Sorghum bicolor Tx430 genome. The final hybrid assembly consists of 29 scaffolds, encompassing in most cases entire chromosome arms. It has a scaffold N50 value of 33.28Mbps and covers >90% of Sorghum bicolor expected genome length. A sequence accuracy of 99.67% was obtained in unique regions after aligning contigs against Illumina Tx430 data. Alignments showed that 99.4% of the 34,211 public gene models are present in the assembly, including 94.2% mapping end-to-end. Comparisons of the DLS optical maps against the public Sorghum Bicolor v3.0.1 BTx623 genome assembly suggest the presence of substantial genomic rearrangements whose origin remains to be determined.

scholarly journals Long-read sequencing across the C9orf72 ‘GGGGCC’ repeat expansion: implications for clinical use and genetic discovery efforts in human disease

2018 ◽  
Author(s):  
Mark T. W. Ebbert ◽  
Stefan Farrugia ◽  
Jonathon Sens ◽  
Karen Jansen-West ◽  
Tania F. Gendron ◽  
...  
Keyword(s):  
Whole Genome Sequencing ◽  
Genome Sequencing ◽  
Repeat Expansion ◽  
Whole Genome ◽  
Short Read ◽  
Short Read Sequencing ◽  
Sequencing Technologies ◽  
Long Read ◽  
Repeat Expansions ◽  
Targeted Approach

AbstractBackground: Many neurodegenerative diseases are caused by nucleotide repeat expansions, but most expansions, like the C9orf72 ‘GGGGCC’ (G4C2) repeat that causes approximately 5-7% of all amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) cases, are too long to sequence using short-read sequencing technologies. It is unclear whether long-read sequencing technologies can traverse these long, challenging repeat expansions. Here, we demonstrate that two long-read sequencing technologies, Pacific Biosciences’ (PacBio) and Oxford Nanopore Technologies’ (ONT), can sequence through disease-causing repeats cloned into plasmids, including the FTD/ALS-causing G4C2 repeat expansion. We also report the first long-read sequencing data characterizing the C9orf72 G4C2 repeat expansion at the nucleotide level in two symptomatic expansion carriers using PacBio whole-genome sequencing and a no-amplification (No-Amp) targeted approach based on CRISPR/Cas9.Results: Both the PacBio and ONT platforms successfully sequenced through the repeat expansions in plasmids. Throughput on the MinlON was a challenge for whole-genome sequencing; we were unable to attain reads covering the human C9orf72 repeat expansion using 15 flow cells. We obtained 8x coverage across the C9orf72 locus using the PacBio Sequel, accurately reporting the unexpanded allele at eight repeats, and reading through the entire expansion with 1324 repeats (7941 nucleotides). Using the No-Amp targeted approach, we attained >800x coverage and were able to identify the unexpanded allele, closely estimate expansion size, and assess nucleotide content in a single experiment. We estimate the individual’s repeat region was >99% G4C2 content, though we cannot rule out small interruptions.Conclusions: Our findings indicate that long-read sequencing is well suited to characterizing known repeat expansions, and for discovering new disease-causing, disease-modifying, or risk-modifying repeat expansions that have gone undetected with conventional short-read sequencing. The PacBio No-Amp targeted approach may have future potential in clinical and genetic counseling environments. Larger and deeper long-read sequencing studies in C9orf72 expansion carriers will be important to determine heterogeneity and whether the repeats are interrupted by non-G4C2 content, potentially mitigating or modifying disease course or age of onset, as interruptions are known to do in other repeat-expansion disorders. These results have broad implications across all diseases where the genetic etiology remains unclear.

scholarly journals Haplotype-aware variant calling enables high accuracy in nanopore long-reads using deep neural networks

2021 ◽  
Author(s):  
Kishwar Shafin ◽  
Trevor Pesout ◽  
Pi-Chuan Chang ◽  
Maria Nattestad ◽  
Alexey Kolesnikov ◽  
...  
Keyword(s):  
De Novo ◽  
Sequence Data ◽  
Variant Calling ◽  
High Accuracy ◽  
Superior Performance ◽  
Read Length ◽  
Single Nucleotide Variants ◽  
Single Nucleotide ◽  
Short Read ◽  
Long Read

Long-read sequencing has the potential to transform variant detection by reaching currently difficult-to-map regions and routinely linking together adjacent variations to enable read based phasing. Third-generation nanopore sequence data has demonstrated a long read length, but current interpretation methods for its novel pore-based signal have unique error profiles, making accurate analysis challenging. Here, we introduce a haplotype-aware variant calling pipeline PEPPER-Margin-DeepVariant that produces state-of-the-art variant calling results with nanopore data. We show that our nanopore-based method outperforms the short-read-based single nucleotide variant identification method at the whole genome-scale and produces high-quality single nucleotide variants in segmental duplications and low-mappability regions where short-read based genotyping fails. We show that our pipeline can provide highly-contiguous phase blocks across the genome with nanopore reads, contiguously spanning between 85% to 92% of annotated genes across six samples. We also extend PEPPER-Margin-DeepVariant to PacBio HiFi data, providing an efficient solution with superior performance than the current WhatsHap-DeepVariant standard. Finally, we demonstrate de novo assembly polishing methods that use nanopore and PacBio HiFi reads to produce diploid assemblies with high accuracy (Q35+ nanopore-polished and Q40+ PacBio-HiFi-polished).

Sign in / Sign up

Export Citation Format

Share Document