scholarly journals The Effects of Austempering Heat Treatment on the Mechanical Properties of Heavy Vehicles Camshaft made of Different Analysis Ductile Cast Iron

2019 ◽  
Vol 135 (4) ◽  
pp. 804-810
Author(s):  
B. Karaca ◽  
M. Şimşir
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Ductile Cast Iron ◽  
Heavy Vehicles

The Influence of Boron on Structure and Mechanical Properties of Bainite Ductile Iron in the Step Austempering in Room Temperature Machine Oil

2010 ◽  
Vol 139-141 ◽  
pp. 235-238
Author(s):  
De Qiang Wei
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Impact Strength ◽  
Ductile Iron ◽  
Room Temperature ◽  
Solute Drag ◽  
Ductile Cast Iron ◽  
Treatment Technique ◽  
The Impact

In this paper, the low alloy bainite ductile cast iron has been obtained by a new heat treatment technique of the step austempering in room-temperature machine oil. The effects of element boron, manganese and copper on structure and mechanical properties of the bainite ductile cast Iron in above-mentioned process are investigated. The phenomenon, hardness lag of the alloyed bainite ductile cast Iron, has been discussed. It shows that after the step austempering in room-temperature machine oil, the hardness will increases with the time. It is found that boron and manganese can increase the hardness and reduce the impact strength while copper can increase the impact strength. The results show that reasonable alloyed elements can improve mechanical properties of the bainite ductile cast Iron. Essentially, hardness lag of the alloyed bainite ductile cast Iron is resulted from solute drag-like effect.

Property and Application of Austempered Ductile Cast Iron

2011 ◽  
Vol 328-330 ◽  
pp. 1297-1300
Author(s):  
Guang Si Luo
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Treatment Process ◽  
Nodular Cast Iron ◽  
Ductile Cast Iron ◽  
Heat Treatment Process ◽  
Engineering Material ◽  
High Fatigue ◽  
Austempered Ductile Cast Iron

Austempered ductile cast iron is newly developed engineering material with a favorable combination of comprehensive mechanical properties. Its properties, such as good comprehensive mechanical properties, high fatigue strength, and good fiction and wear characteristics are included. The application of ADI at home and abroad was presented as well. In order to ensure and improve mechanical properties of ADI, it should ensure high rank nodularity in terms of nodular cast iron, improve graphite nodules, reduce segregation and properly cut down the content of silicon and manganese. While in terms of heat treatment, in order to achieve ideal austenite ferrites, stable and reliable heat treatment process as well as relevant equipment is required.

scholarly journals Comparing the Structure and Mechanical Properties of Welds on Ductile Cast Iron (700 MPa) under Different Heat Treatment Conditions

Metals ◽  
2018 ◽  
Vol 8 (1) ◽  
pp. 72 ◽  
Author(s):  
Ronny Gouveia ◽  
Francisco Silva ◽  
Olga Paiva ◽  
Maria de Fátima Andrade ◽  
Lucas Pereira ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Ductile Cast Iron ◽  
Treatment Conditions

scholarly journals An Investigation into Mechanical Properties of Ductile Cast Iron with Different Heat Treatment Processes

2019 ◽  
Vol 63 (3) ◽  
pp. 183-187
Author(s):  
Romany R. Moussa ◽  
Amer E. Ali ◽  
Ragab K. Abdel-Magied ◽  
Mohamed N. Elshiekh
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cast Iron ◽  
Wear Rate ◽  
Experimental Tests ◽  
Mechanical Tests ◽  
Heat Treatments ◽  
Ductile Cast Iron ◽  
Treatment Processes ◽  
Heat Treated

The mechanical properties as well as microstructure of the ductile cast iron (DCI) are most likely affected by heat treatments. In this work, the mechanical properties of different heat treated of DCI alloy were investigated. Two heat treatment (HT) processes were conducted for DCI; austempering and quenching followed by lower tempering. The melted alloy of DCI was poured in Y-block, from which the specimens of the mechanical tests were prepared. Experimental tests were carried out to investigate the effect of these HT processes on the mechanical properties. A comparison between mechanical properties due to HT and as cast DCI are presented and discussed. The results showed that there is a difference in microstructure, homogeneity, wear rate and compression of DCI based on the conducted heat treatment.

Permanent Mold Casting Practice and Microstructure and Mechanical Properties of Thin-Sectioned ADI Casting

2007 ◽  
Vol 26-28 ◽  
pp. 531-534
Author(s):  
B.M. Moon ◽  
Bong Hwan Kim ◽  
Je Sik Shin ◽  
Sang Mok Lee
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Ductile Cast Iron ◽  
Treatment Temperature ◽  
Chemical Compositions ◽  
Permanent Mold ◽  
Permanent Mold Casting ◽  
Treatment Practice ◽  
Mold Casting ◽  
Si Content

For thin-walled casting development of austempered ductile iron (ADI), permanent mold casting and accompanied heat treatment practice were systematically investigated to suppress and/or remove chill defects of ductile cast iron (DCI) with various thickness of 2 to 9 mm and to ensure mechanical properties of the final ADI casting. Si content was increased up to 3.8% to reduce the chill formation tendency under a high cooling rate. The residual Mg content remarkably affected the nodule count, while the nodule size and spherodization were proven to have weak relationships. Austenitizing process followed by austempering was very sensitive to chemical compositions (Si and Sn) and heat treatment temperature. As a practical application, the steel bar coupler for a structural frame was tried to produce without subsequent machining.

scholarly journals Effect of heat treatment and cryogenics on hardness of ductile cast iron microstructure (FCD­50)

2018 ◽  
Vol 2 (12 (92)) ◽  
pp. 20-26 ◽  
Author(s):  
Suriasnyah Sabarudin ◽  
Pratikto Pratikto ◽  
Agus Suprapto ◽  
Yudy Surya Irawan
Keyword(s):  
Heat Treatment ◽  
Cast Iron ◽  
Ductile Cast Iron
Sign in / Sign up

Export Citation Format

Share Document