scholarly journals Combustion of Mixtures of Natural Gas and Hydrogen Containing producer Gas in a SI Engine : Emission Characteristics under Various Fuel Mixture Conditions

2002 ◽  
Vol 2002.37 (0) ◽  
pp. 176-177
Author(s):  
Kazuyuki Narusawa ◽  
Shigeo Hori ◽  
Byeongil An ◽  
Toben Kvist Jensen
2020 ◽  
Vol 8 (5) ◽  
pp. 330 ◽  
Author(s):  
Michal Puškár ◽  
Melichar Kopas ◽  
Dušan Sabadka ◽  
Marek Kliment ◽  
Marieta Šoltésová

Taking into consideration the quality of air, it is necessary to ensure a continued reduction of the gaseous emissions that are produced by the maritime transport. The most effective solution of this serious worldwide problem is application of a suitable fuel mixture, which contains a bio-component, i.e. the biofuel. The presented scientific study is focused on influence of the biofuels on production of the gaseous emissions in the case of a diesel auxiliary engine, which is used in the ship transport. There were created various fuel mixtures with different content of the bio-component in order to investigate their emission characteristics. The individual experimental measurements were performed at the different engine loading levels and using a variable engine speed spectrum. The obtained results demonstrated a significant influence of the fuel mixtures on the whole combustion process, on the heat release process, on the pressure time behaviour as well as on the engine emission characteristics.


Author(s):  
A. P. Shaikin ◽  
I. R. Galiev

The article analyzes the influence of chemical composition of hythane (a mixture of natural gas with hydrogen) on pressure in an engine combustion chamber. A review of the literature has showed the relevance of using hythane in transport energy industry, and also revealed a number of scientific papers devoted to studying the effect of hythane on environmental and traction-dynamic characteristics of the engine. We have studied a single-cylinder spark-ignited internal combustion engine. In the experiments, the varying factors are: engine speed (600 and 900 min-1), excess air ratio and hydrogen concentration in natural gas which are 29, 47 and 58% (volume).The article shows that at idling engine speed maximum pressure in combustion chamber depends on excess air ratio and proportion hydrogen in the air-fuel mixture – the poorer air-fuel mixture and greater addition of hydrogen is, the more intense pressure increases. The positive effect of hydrogen on pressure is explained by the fact that addition of hydrogen contributes to increase in heat of combustion fuel and rate propagation of the flame. As a result, during combustion, more heat is released, and the fuel itself burns in a smaller volume. Thus, the addition of hydrogen can ensure stable combustion of a lean air-fuel mixture without loss of engine power. Moreover, the article shows that, despite the change in engine speed, addition of hydrogen, excess air ratio, type of fuel (natural gas and gasoline), there is a power-law dependence of the maximum pressure in engine cylinder on combustion chamber volume. Processing and analysis of the results of the foreign and domestic researchers have showed that patterns we discovered are applicable to engines of different designs, operating at different speeds and using different hydrocarbon fuels. The results research presented allow us to reduce the time and material costs when creating new power plants using hythane and meeting modern requirements for power, economy and toxicity.


Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1342
Author(s):  
Van Chien Pham ◽  
Jae-Hyuk Choi ◽  
Beom-Seok Rho ◽  
Jun-Soo Kim ◽  
Kyunam Park ◽  
...  

This paper presents research on the combustion and emission characteristics of a four-stroke Natural gas–Diesel dual-fuel marine engine at full load. The AVL FIRE R2018a (AVL List GmbH, Graz, Austria) simulation software was used to conduct three-dimensional simulations of the combustion process and emission formations inside the engine cylinder in both diesel and dual-fuel mode to analyze the in-cylinder pressure, temperature, and emission characteristics. The simulation results were then compared and showed a good agreement with the measured values reported in the engine’s shop test technical data. The simulation results showed reductions in the in-cylinder pressure and temperature peaks by 1.7% and 6.75%, while NO, soot, CO, and CO2 emissions were reduced up to 96%, 96%, 86%, and 15.9%, respectively, in the dual-fuel mode in comparison with the diesel mode. The results also show better and more uniform combustion at the late stage of the combustions inside the cylinder when operating the engine in the dual-fuel mode. Analyzing the emission characteristics and the engine performance when the injection timing varies shows that, operating the engine in the dual-fuel mode with an injection timing of 12 crank angle degrees before the top dead center is the best solution to reduce emissions while keeping the optimal engine power.


Sign in / Sign up

Export Citation Format

Share Document