Pulsation Simulation and Energy Consumption Analysis of Series Pump Valve Cooperative Control Hydraulic System

In order to reduce the pulsation and the energy consumption of the hydraulic system, the series pump and valve cooperative control hydraulic system is designed, and the pulsation simulation and energy consumption analysis of it is carried out. Firstly, the working principle of series pump valve co control system is studied. Secondly, the mathematical model of series pump valve cooperation control system is established. And then the Controller of series pump valve cooperation control system is designed. Finally, the simulation analysis of the proposed hydraulic system is carried out, and results show that the proposed system has high stability and low energy consumption.

Location Determination Of Optimal Emergency System For Hurricane Disaster Based On Mathematical Modeling

Journal of Computer Science Research ◽

10.30564/jcsr.v2i1.1657 ◽

2020 ◽

Vol 2 (1) ◽

Author(s):

Shizhong Ma

Keyword(s):

Control System ◽

Optical Communication ◽

Simulation Analysis ◽

Control System Design ◽

Optical Communication System ◽

Location Determination ◽

Space Optical Communication ◽

Working Principle ◽

AbstractThis article first introduces the current research status of space optical communication, and gives a brief overview of the development and application prospects of space optical communication, explaining its important research significance. Then, the working principle of ATP in space optical communication system is studied, the mathematical model of ATP control system is established according to the actual needs, and the ATP control system design of space optical communication is designed. By selecting appropriate motors and gyroscopes as the actuators and detection elements of the system, substituting the actual parameters for simulation analysis, and correcting and verifying the results, some useful results are obtained. The simulation results show the rationality and effectiveness of the ATP design scheme.

Design of ATP control system for space optical communication

Control and Systems Engineering ◽

10.18063/cse.v4i1.1134 ◽

2020 ◽

Vol 4 (1) ◽

Author(s):

Shizhong Ma ◽

Mingming Wang ◽

Xiaohui Li

Keyword(s):

Control System ◽

Optical Communication ◽

Simulation Analysis ◽

Control System Design ◽

Communication Research ◽

Optical Communication System ◽

Space Optical Communication ◽

Working Principle ◽

Simulation Results ◽

This article first introduces the significance of studying space optical communication and the current research status at home and abroad, and gives a general discussion on the application prospects and development trends of space optical communication, and elaborates the necessity and importance of conducting optical communication research. Then, the working principle of ATP in space optical communication system is studied, the mathematical model of ATP control system is established according to the actual needs, and the ATP control system design of space optical communication is designed. By selecting appropriate motors and gyroscopes as the actuators and detection elements of the system, substituting the actual parameters for simulation analysis, and correcting and verifying the results, some useful results are obtained. The simulation results show the rationality and effectiveness of the ATP design scheme.

Development of Sheet Material Stamping Automatic Feeding and Pick-Up Device

10.4028/www.scientific.net/amr.139-141.1915 ◽

2010 ◽

Vol 139-141 ◽

pp. 1915-1918

Author(s):

Yan Rong Li ◽

Zong Wei Niu ◽

Xiao Peng Sun

Keyword(s):

Control System ◽

Control Theory ◽

Hall Effect ◽

Power Supply ◽

Hydraulic System ◽

Sheet Material ◽

Labor Intensity ◽

Production Safety ◽

Potential Safety ◽

Working Principle

In stamping production the traditional manual feeding and pick-up manner can lead to potential safety problem. The automatic feeding and automatic pick-up device can ensure the production safety and ease workers’ labor intensity. A kind of automatic feeding and automatic pick-up device and its control system are designed. The configuration, function and working principle of the mechanism were described. Hydraulic system was taken as power supply. Siemens S7-200 was adapted as the center of control system, Hall-effect switch sensor CS1020 was used to detect the position of components. Control theory was studied and programmed. The device described in this paper can realize stamping automatic. Adjusting the position and number of sensors can realize the feeding and pick-up automation of all kind of workpiece, make the system has flexibility and suit the change of production.

Simulation Analysis of Synchronization Control for Ultrahigh Pressure Sterilization Equipment Based on AMESim

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.496-500.1340 ◽

2014 ◽

Vol 496-500 ◽

pp. 1340-1343

Author(s):

Gui Hua Fang ◽

Xiao Yan Li

Keyword(s):

Hydraulic System ◽

Simulation Analysis ◽

Hydraulic Cylinder ◽

Synchronous Motor ◽

Ultrahigh Pressure ◽

Synchronization Control ◽

Working Principle ◽

Working Performance ◽

Sterilization Equipment ◽

Synchrony Measure

This paper introduces the working principle of the ultrahigh pressure sterilization equipment, the hydraulic system of hydraulic cylinder promoting the plug moving is analyzed by simulation, and then the hydraulic system added synchronous motor is analyzed by simulation, which found that the latter hydraulic system has higher synchrony measure , and it can improve the working performance of the original equipment, and it has certain reference significance to the improvement of the hydraulic system of the equipment.

Rig Test and Analysis of Dynamic Engagement Process of Wet Clutch

10.4028/www.scientific.net/amr.945-949.1461 ◽

2014 ◽

Vol 945-949 ◽

pp. 1461-1464

Author(s):

Han Yu Jin ◽

Xiu Sheng Cheng ◽

Xiu Feng Song

Keyword(s):

Mathematical Model ◽

Experimental Verification ◽

Constant Pressure ◽

Simulation Analysis ◽

Test Rig ◽

Wet Clutch ◽

Engagement Process ◽

Working Principle ◽

The working principle of wet clutch was analyzed and the mathematical model was established for torque deliver. Experimental verification and simulation analysis was carried out for the clutch model in the situation of constant pressure engaging process. An efficiency examination of wet clutch implemented on the test rig and provided theory evidence for pressure precisely control.

Design of Computer Measurement and Control System for Electro-Hydraulic Stepping Cylinder

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.101-102.1138 ◽

2011 ◽

Vol 101-102 ◽

pp. 1138-1141

Author(s):

Sheng Hao Zhou ◽

Jun Kai Cao ◽

Jin Chun Song

Keyword(s):

Control System ◽

Hydraulic System ◽

Electrical System ◽

Measurement And Control System ◽

Computer Measurement ◽

Working Principle ◽

And Control ◽

Measurement And Control

To meet the requirements of measurement and control system for common servo-cylinder and considering the characteristics of electro-hydraulic stepping cylinder, a computer measurement and control system is designed. In this paper, the working principle of hydraulic system, the structure of electrical system, the process of measurements and the functions of testing software based on LabVIEW are introduced.

Control Design of Foreign Fibers Detecting System Paving Mechanism

10.4028/www.scientific.net/amr.846-847.228 ◽

2013 ◽

Vol 846-847 ◽

pp. 228-232

Author(s):

Hua Qing Wang ◽

Jian Cheng Yang ◽

Kai Yang ◽

Jian Feng Qin ◽

Ze Xu Zhou ◽

...

Keyword(s):

Mathematical Model ◽

Control System ◽

Control Design ◽

Line Speed ◽

On Line ◽

Working Principle ◽

The Mathematical Model ◽

The Relationship

In this paper the working principle of cotton foreign fibers detecting and clearing on line device paving and loosing part is described, and the mathematical model of the relationship between line speed is established, and paving part control system that is suitable for this device has been designed on this basis.

Equilibrium Automatic Wind Door and Electronic Control System

10.4028/www.scientific.net/amr.476-478.2613 ◽

2012 ◽

Vol 476-478 ◽

pp. 2613-2616

Author(s):

Guang Zhen Cheng ◽

Hong Fei Lin ◽

Yun Ting Zheng

Keyword(s):

Control System ◽

Coal Mine ◽

Hydraulic System ◽

Ladder Diagram ◽

Electronic Control ◽

Underground Coal Mine ◽

Electrical Control ◽

Programmable Controller ◽

Electronic Control System ◽

Working Principle

This paper will introduce the application status of the wind door of the underground coal mine, the structure and composition, the working principle, the hydraulic system, and the electrical control system of the automatic wind door which is controlled by PLC. This paper will focus on the design of the programmable controller program and show the ladder diagram of the corresponding program and the outer way of wiring.

The Mathematical Modeling, Simulation, and Practice of a Multipoint Synchronous Lifting Control Case Study for Bridges

Mathematical Problems in Engineering ◽

10.1155/2019/5936434 ◽

2019 ◽

Vol 2019 ◽

pp. 1-10 ◽

Cited By ~ 1

Author(s):

Jianjun Wang ◽

Jingyi Zhao ◽

Wenlei Li

Keyword(s):

Control System ◽

Hydraulic System ◽

Simulation Software ◽

Matlab Simulation ◽

Fuzzy Pid Controller ◽

Hydraulic Cylinders ◽

Construction Accidents ◽

Adaptive Pid Control ◽

The Mathematical Model ◽

Synchronization Accuracy

In the combined transportation of multiple girder transport vehicles, the lifting of multiple hydraulic cylinders must ensure a certain synchronization accuracy, otherwise the bridge structure will be damaged, and even serious construction accidents will occur. The synchronous lifting of a large prefabricated bridge is studied. According to the requirements of synchronous lifting of the bridge, the appropriate control strategy is selected and the hydraulic system of synchronous lifting device is designed. The mathematical model of the synchronous lifting hydraulic system is established, and the fuzzy PID controller is applied. The simulation of the fuzzy adaptive PID control system for the synchronous lifting device is carried out by using MATLAB simulation software, and the simulation results indicate that the rationality of the control system is verified. The experimental results show that the control of the system is convenient and the synchronization accuracy is high, which can provide a reference for the synchronous lifting control.