scholarly journals Design of Dual-Band and Low-Profile SIW Cavity-Backed Slot Antenna for 5G Applications

2021 ◽  
Author(s):  
Amit Kumar ◽  
Amit Kumar Singh
Keyword(s):  
Ground Plane ◽  
Effective Length ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
Antenna Performance ◽  
Dual Band Antenna ◽  
Low Profile ◽  
Via Hole

In this communication, the design of a dual-band and low-profile SIW cavity-backed slot antenna operating at K-band and Ka-band has been proposed to expand the Impedance bandwidth (IBW) of the antenna. The dual-band antenna consists of the SIW cavity with two parallel slots etched on the conductor’s ground plane. To obtain a dual-band, higher-order hybrid modes are tuned and combined to form the second band of the proposed antenna with a broader bandwidth. For dual-band antenna, fractional bandwidth of 5.26% and 6.15% are attained with the maximum gain of 5.45 dBi and 6.15 dBi at 24.7 GHz and 27.8 GHz, respectively. A cavity-backed antenna using via-hole and the slot has been proposed to improve an IBW and other antenna performance parameters. Via-hole establishes a connection between the top and bottom surfaces of the cavity, creating a new path for the current to flow by shortening the slot’s effective length. An IBW of 4.2 GHz (15.32%), where a gain of 7.8 dBi and 9.2 dBi have been realized at 25.9 GHz and 28.8 GHz, respectively. Isolation of less than 25 dB has been achieved through simulation. In terms of λ0, the overall volumetric dimension of the proposed antenna is 1.68 λ0×1.31λ0×0.04λ0. The proposed design demonstrates better performance in terms of antenna parameters, including compactness, good radiation characteristics, enhanced impedance bandwidth, and higher gain than the latest state of the art.

scholarly journals A Low Profile Dual-Band High Gain Directional Antenna for Anti-Interference WLAN Station Applications

2021 ◽  
Vol 11 (5) ◽  
pp. 2007
Author(s):  
Yuqing Dou ◽  
Guiting Dong ◽  
Jiafu Lin ◽  
Qibo Cai ◽  
Gui Liu
Keyword(s):  
Frequency Band ◽  
Local Area Network ◽  
Ground Plane ◽  
Directional Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Directional Radiation ◽  
Dual Band Antenna ◽  
Low Profile

This paper presents a low-profile dual-band antenna with directional radiation characteristics for wireless local area network (WLAN) applications. The proposed directional antenna is composed of a coupling microstrip line, two F-shaped strips, two rectangular strips, and a defected ground plane. The measured impedance bandwidth of the proposed antenna is 180 MHz (2.33–2.51 GHz) and 830 MHz (5.09–5.92 GHz), which can cover Institute of Electrical and Electronic Engineers (IEEE) 802.11 a/b/g frequency bands. The dual-band antenna exhibits a desirable directional radiation patterns in the vertical and horizontal planes with the peak gain of 6.55 dBi in the lower frequency band and 8.1 dBi in the higher frequency band. The measured antenna efficiency is 70% at 2.4 GHz and 84.5% at 5.5 GHz. The proposed dual-band WLAN station antenna is designed on a FR4 substrate with overall dimensions of 69 mm × 50 mm × 1.6 mm.

Design of Dual Band Dual Sense Circularly Polarized Wide Slot Antenna with C-shaped Radiator for Wireless Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 343-351 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Centre Frequency ◽  
Low Profile ◽  
Peak Gain

Abstract A low profile wide slot antenna for dual band and dual sense circular polarization (CP) is proposed here and is simulated by using HFSS simulation software.The proposed antenna having a C shaped patch for dual band operation and a wide square slot etched on the ground with two strips for CP operation. In between radiating patch and ground plane, designed antenna has a layer of easily available dielectric (FR-4) material. Proposed antenna shows an impedance bandwidth of 13.8 % at 2.38 GHz of centre frequency and 9.7 % at 4.43 GHz of centre frequency for lower and upper band respectively. The 3-dB axial ratio (AR) bandwidths for lower and upper band are 18.8 % (at 2.44 GHz of centre frequency) and 13.3 % (at 4.29 GHz of centre frequency), respectively. The peak gain for the lower and upper band is found as 4.1 dBi and 3.3 dBi, respectively. A close agreement has been found between the simulated and the measured results.

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

scholarly journals Compact Multiband Microstrip Printed Slot Antenna Design for Wireless Communication Applications

2020 ◽  
Vol 9 (2) ◽  
pp. 52-59
Author(s):  
H. A. Hammas ◽  
M. F. Hasan ◽  
A. S. A. Jalal
Keyword(s):  
Ground Plane ◽  
Wireless Systems ◽  
Ring Structure ◽  
Slot Antenna ◽  
Printed Antenna ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Annular Ring ◽  
Antenna Performance ◽  
Frequency Ratios

In this paper, a compact multiband printed antenna is proposed to cover four resonant bands in the range of 1-6 GHz. The antenna structure is inspired from that of the classical multi-cavity magnetron resonator. The antenna comprises a slot annular ring structure in the ground plane of an Isola FR4 substrate having Ԑr = 3.5 and thickness h=1.5 mm. The outer circle of the annular ring is loaded with radial arranged small circular slots. On the opposite side of the substrate, the antenna is fed with a 50-Ohm microstrip line. To investigate the effect of different antenna elements on the antenna performance, a parametric study is conducted. The antenna is simulated, fabricated, and measured. The simulated 10 dB return loss bandwidths for the four resonant bands are 35% (1.53–2.11GHz), 14% (2.9–3.34GHz), 12% (4.2–4.75GHz), and 9% (4.94–5.39GHz), respectively. Thus, the antenna is a proper candidate for many in use bands of wireless systems (1.65, 3.14, 4.44, 5.24 GHz), including LTE-FDD, GNSS, GSM-450, W-CDMA/HSPA/k, 802.11a, and IEEE 802.11ac WLAN. The results indicate that the designed antenna has quad-band resonant responses with substantial frequency ratios of f4/f3, f3/f2 and f2/f1. Besides, the antenna offers reasonable radiation characteristics with a gain of 2.5, 4.0, 6.2, and 4.2 dBi, throughout the four resonant bands.

A compact, dual wide-band circularly polarized, modified square ring slot antenna for C and Ku band applications

2018 ◽  
Vol 11 (2) ◽  
pp. 182-189 ◽  
Author(s):  
Shilpee Patil ◽  
Anil Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Simulated Data ◽  
Axial Ratio ◽  
Wide Band ◽  
Radiation Characteristic ◽  
Dual Band ◽  
Slot Antenna ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Circularly Polarized

AbstractThis paper presents a compact microstrip antenna using FR-4 substrate for dual band circularly polarized operation using a modified square ring slot in the ground plane with microstrip line feed. Simulation of the impedance characteristic and radiation characteristic for the proposed antenna is carried out using commercially available HFSS software. The simulated data validate measured results and shows good agreement. Proposed antenna shows an impedance bandwidth (return loss >10 dB) of 50.88% at 5.9 GHz of center frequency and 29.92% at 12.8 GHz of center frequency for lower and upper band, respectively. The 3 dB axial ratio bandwidth for lower and upper band is 26.4 and 3.0%, respectively and measured peak gain for the lower and upper band is found as 3.2 and 3.4 dBic, respectively. The proposed antenna can be suitable for wireless communication in C and Ku bands.

scholarly journals T-Shaped Compact Dielectric Resonator Antenna for UWB Application

2019 ◽  
Vol 8 (3) ◽  
pp. 57-63
Author(s):  
A. Zitouni ◽  
N. Boukli-Hacene
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Printed Antenna ◽  
Frequency Range ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Antenna Performance

In this article, a novel T-shaped compact dielectric resonator antenna for ultra-wideband (UWB) application is presented and studied. The proposed DRA structure consists of T-shaped dielectric resonator fed by stepped microstrip monopole printed antenna, partial ground plane and an inverted L-shaped stub. The inverted L-shaped stub and parasitic strip are utilized to improve impedance bandwidth. A comprehensive parametric study is carried out using HFSS software to achieve the optimum antenna performance and optimize the bandwidth of the proposed antenna. From the simulation results, it is found that the proposed antenna structure operates over a frequency range of 3.45 to more than 28 GHz with a fractional bandwidth over 156.12%, which covers UWB application, and having better gain and radiation characteristics.

scholarly journals Dual Band Slotted Printed Circular Patch Antenna With Superstrate and EBG Structure for 5G Applications

2019 ◽  
Vol 38 (1) ◽  
pp. 227-238 ◽  
Author(s):  
Bismah Hasan ◽  
Kamran Raza
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Radiation Characteristics ◽  
Circular Patch ◽  
Feed Line ◽  
Circular Patch Antenna ◽  
Power Radiation

Slotted circular printed layered patch antenna is designed, simulated and fabricated for 5G (Fifth Generation) wireless communication applications. The antenna consists of slots in the main radiating circular patch element for miniaturizing the size of the radiating element and providing dual band radiation characteristics. The feed line is separated on bottom substrate layer with EBG (Electromagnetic Band-Gap) embedded for enhancing the gain characteristics of the antenna. Superstrate layer is also used for improving the gain of the antenna where the distance from the radiating antenna element is optimized for maximizing the impedance bandwidth and radiation characteristics. The feed realization and impedance matching of the radiating slotted circular patch antenna is done by inducing slot at the middle ground plane of the slot embedded circular patch antenna system. The proposed configuration provides power radiation gain values of more than 5 dB for the Ka band of communications, whereas the impedance bandwidth of the antenna is verified for the dual resonances at 27.5 and 28.5 GHz. Dual band radiation characteristics are attained by embedding and optimizing the slot length and width in the circular patch radiator element that is placed on the upper face of the substrate RT Rogers Duroid 5880 layer. The length of the microstrip feed line embedded in the lower layer of the substrate is optimized for providing required bandwidth characteristics for the dual frequency point radiations. The antenna configuration is designed, modeled and simulated in CST (Central Standard Time) Microwave studio. The antenna is fabricated and measured vs simulated frequency response, gain patterns and current density plots are presented for the verification of antenna operation in the desired frequency bands.

scholarly journals Miniature Slotted Semi-Circular Dual-Band Antenna for WiMAX and WLAN Applications

2020 ◽  
Vol 20 (2) ◽  
pp. 115-124
Author(s):  
Dhirgham Kamal Naji
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Order Mode ◽  
Circular Patch ◽  
Area Reduction ◽  
Antenna Miniaturization ◽  
Dual Band Antenna ◽  
Simple Geometry

In this paper, a new approach is presented for designing a miniaturized microstrip patch antenna (MPA) for dual-band applications. The proposed MPA consists of a semi-circular patch radiator fed by a 50-Ω coplanar waveguide (CPW) structure with a tapered-ground plane for enhancing impedance bandwidth over the dual-band. By inserting a folded U-shaped slot into the semi-circular patch, the proposed antenna introduces an additional higher-order mode but does not modify the resonance frequency of the lower-order mode of the patch, yielding the desired dual-band response. For antenna miniaturization, the circular-shaped radiator of the reference antenna (RA) was converted into a semi-circular radiating patch. Agreement between CST and HFSS simulated results led us to manufacture a prototype of the designed antenna on one side of an inexpensive FR-4 substrate with an overall dimension of 17 × 18 × 0.8 mm<sup>3</sup>. The measured result in terms of reflection coefficient S11 confirms that the antenna operates in both 3.5 GHz (3.4–3.7 GHz) and 5.8 GHz (5.725–5.875 GHz) bands suitable for use in WiMAX and WLAN applications, respectively. Moreover, besides an area reduction of 32% compared with the RA counterpart, the proposed antenna has other features, a simple geometry, and is easy to manufacture in comparison with previously reported antenna structures.

Cantor fractal-based printed slot antenna for dual-band wireless applications

2014 ◽  
Vol 8 (2) ◽  
pp. 263-270 ◽  
Author(s):  
Jawad Ali ◽  
Seevan Abdulkareem ◽  
Ali Hammoodi ◽  
Ali Salim ◽  
Mahmood Yassen ◽  
...  
Keyword(s):  
Ground Plane ◽  
Design Procedure ◽  
Dual Band ◽  
Slot Antenna ◽  
Geometrical Parameters ◽  
Wireless Applications ◽  
Antenna Performance ◽  
Compact Size ◽  
Wide Range ◽  
Slot Structure

Fractal geometries are attractive for antenna designers seeking antennas with compact size and multiband resonant behavior. This paper presents the design of a new microstrip-fed printed slot antenna for use in dual-band wireless applications. The slot structure of the proposed antenna is in the form of Cantor square fractal geometry of the second iteration. The slot structure has been etched on the ground plane of a substrate with relative permittivity of 4.4 and 1.6 mm in thickness. A parametric study is conducted to explore the effects of some geometrical parameters on the antenna performance. Results show that the antenna possesses a dual-band behavior with a wide range of resonant frequency ratio. In addition to the ease of fabrication and simple design procedure, the antenna offers desirable radiation characteristics. A prototype of the proposed antenna has been simulated, fabricated, and measured. The measured 10 dB return loss bandwidths for the lower and the upper resonant bands are 42% (2.35–3.61 GHz) and 20% (5.15–6.25 GHz), respectively. This makes the proposed antenna suitable to cover a number of operating bands of wireless systems (2.4 GHz-Bluetooth, 2.4 GHz ISM, 2.4/5.8 GHz-WLAN, 3.5 GHz-WiMAX, and 5.8 GHz-ITS).

Sign in / Sign up

Export Citation Format

Share Document