In situ FT-IR Investigation of Formic Acid Adsorption on Reduced and Reoxidized Copper Catalysts

1994 ◽  
Vol 48 (7) ◽  
pp. 827-832 ◽  
Author(s):  
Graeme J. Millar ◽  
David Newton ◽  
Graham A. Bowmaker ◽  
Ralph P. Cooney
Keyword(s):  
Activation Energy ◽  
Formic Acid ◽  
Maximum Rate ◽  
Heterogeneous Catalysts ◽  
Copper Catalyst ◽  
Copper Catalysts ◽  
Copper Surface ◽  
Desorption Activation Energy ◽  
Ft Ir

An in situ infrared cell capable of studying reactions over heterogeneous catalysts in the temperature range 77 to 773 K has been designed. In particular, the adsorption of formic acid on a model Cu/SiO2 methanol synthesis catalyst was investigated. Exposure of a reduced copper surface to formic acid at 300 K resulted in the formation of both formic acid molecules, which were ligated to the copper catalyst, and chemisorbed bidentate copper formate species. Under temperature-programming conditions, the bidentate species displayed a maximum rate of desorption at 433 K, which correlates to a desorption activation energy of 120 kJ mol−1. In contrast, on the reoxidized catalyst, unidentate formate species were preferentially formed. These exhibited a maximum rate of desorption at a temperature of 408 K, and a desorption activation energy of 113 kJ mol−1. A mechanism was postulated to explain this behavior, and evidence was presented to show that useful kinetic data can be obtained for desorption from a catalyst in the form of a pressed disk.

In Situ FT-IR Study of Photocatalytic Decomposition of Formic Acid to Hydrogen on Pt/TiO2 Catalyst

2008 ◽  
Vol 29 (2) ◽  
pp. 105-107 ◽  
Author(s):  
Tao CHEN ◽  
Guopeng WU ◽  
Zhaochi FENG ◽  
Gengshen HU ◽  
Weiguang SU ◽  
...  
Keyword(s):  
Formic Acid ◽  
Photocatalytic Decomposition ◽  
Tio2 Catalyst ◽  
Ft Ir ◽  
Ir Study

scholarly journals Study the Effect of Various Sulfonation Methods on Catalytic Activity of Carbohydrate-Derived Catalysts for Ester Production

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 638
Author(s):  
Nur Hidayah Deris ◽  
Umer Rashid ◽  
Soroush Soltani ◽  
Thomas Shean Yaw Choong ◽  
Imededdine Arbi Nehdi
Keyword(s):  
Catalytic Activity ◽  
Fatty Acid ◽  
Thermal Treatment ◽  
Heterogeneous Catalysts ◽  
In Situ Polymerization ◽  
Acid Methyl Ester ◽  
Ft Ir ◽  
Concentrated Sulfuric Acid ◽  
Temperature Programmed

In the present study, four types of sulfonation method, including thermal treatment with concentrated sulfuric acid (H2SO4), thermal decomposition of ammonium sulphate (NHSO4), thermal treatment with chlorosulfonic in chloroform (HSO3Cl), and in situ polymerization of poly(sodium4-styrenesulfonate) (PSS), were employed to convert incomplete carbonized glucose (ICG) to sulfonated heterogeneous catalysts for the fatty acid methyl ester (FAME) production. The characteristics of synthesized catalysts were further examined using Raman spectroscopy, Fourier transformation infrared (FT-IR), ammonia temperature programmed desorption (NH3-TPD), Brunauer–Emmett–Teller (BET), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). According to experiments, the sulfonic acid density was varied in a range from 4.408 to 14.643 mmol g−1 over various sulfonation methods. The catalytic activity of synthesized catalysts over different sulfonation methods was determined by performing the conversion of palm fatty acid distillate (PFAD) to ester synthesis in a batch-system reactor. The findings reveal that using PSS-ICG resulted in the highest FAME yield of 96.3% followed by HSO3Cl-ICG of 94.8%, NHSO4-ICG of 84.2%; and H2SO4-ICG of 77.2%. According to results, the ICG sulfonated by PSS method with the highest acid density (14.643 mmol g−1) gave the highest catalytic activity over PFAD conversion to biodiesel. According to experiment results, acid density played a crucial role over FAME yield percentage. Besides acid density, it is also worth mentioning that various sulfonation methods including different mechanisms, chemicals and sulfonating agents played crucial roles in the FAME yield percentage.

FT-IR microspectroscopic analysis of diseased white matter brain tissues

1995 ◽  
Vol 53 ◽  
pp. 968-969
Author(s):  
Steven M. Le Vine ◽  
David L. Wetzel
Keyword(s):  
White Matter ◽  
Gray Matter ◽  
Twitcher Mouse ◽  
Grid Pattern ◽  
Marked Contrast ◽  
Spatially Resolved ◽  
Ft Ir ◽  
Ir Microspectroscopy ◽  
Chemical Evidence

In situ FT-IR microspectroscopy has allowed spatially resolved interrogation of different parts of brain tissue. In previous work the spectrrscopic features of normal barin tissue were characterized. The white matter, gray matter and basal ganglia were mapped from appropriate peak area measurements from spectra obtained in a grid pattern. Bands prevalent in white matter were mostly associated with the lipid. These included 2927 and 1469 cm-1 due to CH2 as well as carbonyl at 1740 cm-1. Also 1235 and 1085 cm-1 due to phospholipid and galactocerebroside, respectively (Figs 1and2). Localized chemical changes in the white matter as a result of white matter diseases have been studied. This involved the documentation of localized chemical evidence of demyelination in shiverer mice in which the spectra of white matter lacked the marked contrast between it and gray matter exhibited in the white matter of normal mice (Fig. 3).The twitcher mouse, a model of Krabbe’s desease, was also studied. The purpose in this case was to look for a localized build-up of psychosine in the white matter caused by deficiencies in the enzyme responsible for its breakdown under normal conditions.

scholarly journals Morphology Controlled Synthesis of γ-Al2O3 Nano-Crystallites in Al@Al2O3 Core–Shell Micro-Architectures by Interfacial Hydrothermal Reactions of Al Metal Substrates

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 310
Author(s):  
Dohyeon Han ◽  
Doohwan Lee
Keyword(s):  
Electrostatic Interactions ◽  
Heterogeneous Catalysts ◽  
Metal Substrate ◽  
Inorganic Anions ◽  
Core Shell ◽  
Hydroxyl Groups ◽  
Hydrothermal Reactions ◽  
Fine Control ◽  
Reaction Processes

Fine control of morphology and exposed crystal facets of porous γ-Al2O3 is of significant importance in many application areas such as functional nanomaterials and heterogeneous catalysts. Herein, a morphology controlled in situ synthesis of Al@Al2O3 core–shell architecture consisting of an Al metal core and a porous γ-Al2O3 shell is explored based on interfacial hydrothermal reactions of an Al metal substrate in aqueous solutions of inorganic anions. It was found that the morphology and structure of boehmite (γ-AlOOH) nano-crystallites grown at the Al-metal/solution interface exhibit significant dependence on temperature, type of inorganic anions (Cl−, NO3−, and SO42−), and acid–base environment of the synthesis solution. Different extents of the electrostatic interactions between the protonated hydroxyl groups on (010) and (001) facets of γ-AlOOH and the inorganic anions (Cl−, NO3−, SO42−) appear to result in the preferential growth of γ-AlOOH toward specific crystallographic directions due to the selective capping of the facets by adsorption of the anions. It is hypothesized that the unique Al@Al2O3 core–shell architecture with controlled morphology and exposed crystal-facets of the γ-Al2O3 shell can provide significant intrinsic catalytic properties with enhanced heat and mass transport to heterogeneous catalysts for applications in many thermochemical reaction processes. The direct fabrication of γ-Al2O3 nano-crystallites from Al metal substrate with in-situ modulation of their morphologies and structures into 1D, 2D, and 3D nano-architectures explored in this work is unique and can offer significant opportunities over the conventional methods.

In situ construction of phenanthroline-based cationic radical porous hybrid polymers for metal-free heterogeneous catalysis

2021 ◽  
Vol 9 (12) ◽  
pp. 7556-7565
Author(s):  
Guojian Chen ◽  
Yadong Zhang ◽  
Ke Liu ◽  
Xiaoqing Liu ◽  
Lei Wu ◽  
...  
Keyword(s):  
Heterogeneous Catalysis ◽  
Heterogeneous Catalysts ◽  
Hybrid Polymers ◽  
Metal Free ◽  
Oxidation Of Sulfides

Constructing phenanthroline-based cationic radical porous hybrid polymers as versatile metal-free heterogeneous catalysts for both oxidation of sulfides and CO2 conversion.

scholarly journals Experimental and Theoretical Studies of Sonically Prepared Cu–Y, Cu–USY and Cu–ZSM-5 Catalysts for SCR deNOx

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 824
Author(s):  
Przemysław J. Jodłowski ◽  
Izabela Czekaj ◽  
Patrycja Stachurska ◽  
Łukasz Kuterasiński ◽  
Lucjan Chmielarz ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Ultrasonic Irradiation ◽  
Active Phase ◽  
Spectroscopic Studies ◽  
In Situ Drifts ◽  
Ft Ir ◽  
Diffuse Reflectance Infrared ◽  
Experimental And Theoretical Studies

The objective of our study was to prepare Y-, USY- and ZSM-5-based catalysts by hydrothermal synthesis, followed by copper active-phase deposition by either conventional ion-exchange or ultrasonic irradiation. The resulting materials were characterized by XRD, BET, SEM, TEM, Raman, UV-Vis, monitoring ammonia and nitrogen oxide sorption by FT-IR and Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS). XRD data confirmed the purity and structure of the Y/USY or ZSM-5 zeolites. The nitrogen and ammonia sorption results indicated that the materials were highly porous and acidic. The metallic active phase was found in the form of cations in ion-exchanged zeolites and in the form of nanoparticle metal oxides in sonochemically prepared catalysts. The latter showed full activity and high stability in the SCR deNOx reaction. The faujasite-based catalysts were fully active at 200–400 °C, whereas the ZSM-5-based catalysts reached 100% activity at 400–500 °C. Our in situ DRIFTS experiments revealed that Cu–O(NO) and Cu–NH3 were intermediates, also indicating the role of Brønsted sites in the formation of NH4NO3. Furthermore, the results from our experimental in situ spectroscopic studies were compared with DFT models. Overall, our findings suggest two possible mechanisms for the deNOx reaction, depending on the method of catalyst preparation (i.e., conventional ion-exchange vs. ultrasonic irradiation).

scholarly journals Synthesis of Poly(methacrylic acid-co-butyl acrylate) Grafted onto Functionalized Carbon Nanotube Nanocomposites for Drug Delivery

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 533 ◽  
Author(s):  
Josué A. Torres-Ávalos ◽  
Leonardo R. Cajero-Zul ◽  
Milton Vázquez-Lepe ◽  
Fernando A. López-Dellamary ◽  
Antonio Martínez-Richa ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Drug Delivery ◽  
Methacrylic Acid ◽  
Butyl Acrylate ◽  
Chemical Vapor ◽  
Vis Spectroscopy ◽  
Ir And Raman Spectroscopies ◽  
Ft Ir

Design of a smart drug delivery system is a topic of current interest. Under this perspective, polymer nanocomposites (PNs) of butyl acrylate (BA), methacrylic acid (MAA), and functionalized carbon nanotubes (CNTsf) were synthesized by in situ emulsion polymerization (IEP). Carbon nanotubes were synthesized by chemical vapor deposition (CVD) and purified with steam. Purified CNTs were analyzed by FE-SEM and HR-TEM. CNTsf contain acyl chloride groups attached to their surface. Purified and functionalized CNTs were studied by FT-IR and Raman spectroscopies. The synthesized nanocomposites were studied by XPS, 13C-NMR, and DSC. Anhydride groups link CNTsf to MAA–BA polymeric chains. The potentiality of the prepared nanocomposites, and of their pure polymer matrices to deliver hydrocortisone, was evaluated in vitro by UV–VIS spectroscopy. The relationship between the chemical structure of the synthesized nanocomposites, or their pure polymeric matrices, and their ability to release hydrocortisone was studied by FT-IR spectroscopy. The hydrocortisone release profile of some of the studied nanocomposites is driven by a change in the inter-associated to self-associated hydrogen bonds balance. The CNTsf used to prepare the studied nanocomposites act as hydrocortisone reservoirs.

scholarly journals Ambient base-free glycerol oxidation over bimetallic PdFe/SiO2 by in situ generated active oxygen species

2021 ◽  
Author(s):  
Ricci Underhill ◽  
Mark Douthwaite ◽  
Richard J. Lewis ◽  
Peter J. Miedziak ◽  
Robert D. Armstrong ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Bimetallic Catalyst ◽  
Electron Paramagnetic Resonance Spectroscopy ◽  
Active Oxygen Species ◽  
Catalytic Performance ◽  
Resonance Spectroscopy ◽  
Oxygen Species ◽  
Paramagnetic Resonance ◽  
Temperature Oxidation

AbstractLow temperature oxidation of alcohols over heterogeneous catalysts is exceptionally challenging, particularly under neutral conditions. Herein, we report on an efficient, base-free method to oxidise glycerol over a 0.5%Pd-0.5%Fe/SiO2 catalyst at ambient temperature in the presence of gaseous H2 and O2. The exceptional catalytic performance was attributed to the in situ formation of highly reactive surface-bound oxygenated species, which promote the dehydrogenation on the alcohol. The PdFe bimetallic catalyst was determined to be significantly more active than corresponding monometallic analogues, highlighting the important role both metals have in this oxidative transformation. Fe leaching was confirmed to occur over the course of the reaction but sequestering experiments, involving the addition of bare carbon to the reactions, confirmed that the reaction was predominantly heterogeneous in nature. Investigations with electron paramagnetic resonance spectroscopy suggested that the reactivity in the early stages was mediated by surface-bound reactive oxygen species; no homogeneous radical species were observed in solution. This theory was further evidenced by a direct H2O2 synthesis study, which confirmed that the presence of Fe in the bimetallic catalyst neither improved the synthesis of H2O2 nor promoted its decomposition over the PdFe/SiO2 catalyst.

Sign in / Sign up

Export Citation Format

Share Document