scholarly journals Evaluasi Modulasi MFSK untuk Transmisi Data Melalui Kanal Suara GSM

Jurnal INKOM ◽  
2014 ◽  
Vol 8 (1) ◽  
pp. 37
Author(s):  
Rika Sustika ◽  
Oka Mahendra
Keyword(s):  
Mobile Communication ◽  
Bit Error Rate ◽  
Error Rate ◽  
Gaussian Noise ◽  
Linear Prediction ◽  
Signal To Noise Ratio ◽  
Additive White Gaussian Noise ◽  
Signal To Noise ◽  
Global System ◽  
Shift Keying

Pada tulisan ini, dievaluasi performansi skema modulasi MFSK (M-ary Frequency Shift Keying) untuk aplikasi pengiriman data melalui kanal suara GSM (Global System for Mobile Communication). Parameter yang dievaluasi berupa kesalahan bit trasmisi yang dinyatakan dengan laju kesalahan bit atau bit error rate (BER). Evaluasi ini dilakukan untuk menentukan besarnya orde M yang akan dipilih pada aplikasi pengiriman data digital melalui kanal suara GSM. Pada proses simulasi, data digital dikodekan menjadi simbol-simbol lalu dimodulasi menggunakan modulator MFSK menjadi data menyerupai pembicaraan (suara). Suara yang dihasilkan dikodekan dengan algoritma CELP (Code Excited Linear Prediction), kemudian dikirimkan melalui udara yang dimodelkan sebagai kanal AWGN (Additive White Gaussian Noise). Di sisi penerima, sinyal terima yang menyerupai suara ini didemodulasi dan dikonversi kembali menjadi data digital. Dari simulasi menggunakan Eb/No (signal to noise ratio) sebesar 6 dB, diperoleh laju bit 2,5 kbps dengan BER 2,01 x 10-3 untuk M=4, 2,22 x 10-3 untuk M=8, dan 1,87 x 10-3 untuk M=16.

scholarly journals Pemodelan Non-uniform Coded-Modulation pada Kanal Akustik Bawah Air di Lingkungan Perairan Dangkal

2019 ◽  
Vol 9 (1) ◽  
pp. 38
Author(s):  
Sholihah Ayu Wulandari ◽  
Tri Budi Santoso ◽  
I Gede Puja Astawa ◽  
Muhamad Milchan
Keyword(s):  
Error Rate ◽  
Gaussian Noise ◽  
Signal To Noise Ratio ◽  
Additive White Gaussian Noise ◽  
Measurement Data ◽  
Coded Modulation ◽  
Bch Code ◽  
Ieee 802.11A ◽  
Shift Keying ◽  
Binary Information

In this paper, presented an OFDM performance evaluation with the Non-uniform Coded-Modulation in the underwater acoustic channel in shallow water. A row of binary information is encoded by BCH code (7.4) for error correction and combined with Non-uniform modulation which is the result of modification of the subcarrier arrangement of the OFDM standard IEEE 802.11a. Modeling uses 52 subcarriers consisting of 4 pilots and 48 subcarrier data which are divided into three parts, i.e.: 24 subcarrier data with 16-Quadrature Amplitude Modulation (16-QAM) modulation, 12 subcarrier data with Quadrature phase-shift keying (QPSK) modulation and 12 other data subcarriers with Binary key-shift keying (BPSK) modulation. The channel type used describes the Additive White Gaussian Noise (AWGN) condition and is the result of measurement data. The analysis is done in terms of Signal-to-Noise-Ratio (SNR) and Bit Error Rate (BER) show that the value of the error rate of 0.001, modulation of BPSK, QPSK, 16-QAM, and Non-uniform modulation required the power each 5 dB, 8.5 dB, 10.3 dB, and 7.9 dB. However, the proposed system is able to suppress the required power up to 6 dB. The proposed system also shows better performance than fixed modulation and Non-uniform Modulation, which in this case with low power to achieve the same error rate. In addition, the proposed system has a coding gain of 1.9 dB compared to a non-uniform modulation system. Real testing is also done with measurement data at Mangrove estuary, Surabaya. The results show performance similar to simulations performed on Gaussian noise channels.

ANALISIS SENSITIVITAS VIDEO MPEG-4 BERDASARKAN STRUKTUR FRAME PADA TRANSMISI DVB-T

2020 ◽  
Vol 25 (2) ◽  
pp. 86-97
Author(s):  
Sandy Suryo Prayogo ◽  
Tubagus Maulana Kusuma
Keyword(s):  
Deep Learning ◽  
Bit Error Rate ◽  
Error Rate ◽  
Signal To Noise Ratio ◽  
Similarity Index ◽  
Structural Similarity ◽  
Signal To Noise ◽  
Structural Similarity Index ◽  
Noise Ratio

DVB merupakan standar transmisi televisi digital yang paling banyak digunakan saat ini. Unsur terpenting dari suatu proses transmisi adalah kualitas gambar dari video yang diterima setelah melalui proses transimisi tersebut. Banyak faktor yang dapat mempengaruhi kualitas dari suatu gambar, salah satunya adalah struktur frame dari video. Pada tulisan ini dilakukan pengujian sensitifitas video MPEG-4 berdasarkan struktur frame pada transmisi DVB-T. Pengujian dilakukan menggunakan simulasi matlab dan simulink. Digunakan juga ffmpeg untuk menyediakan format dan pengaturan video akan disimulasikan. Variabel yang diubah dari video adalah bitrate dan juga group-of-pictures (GOP), sedangkan variabel yang diubah dari transmisi DVB-T adalah signal-to-noise-ratio (SNR) pada kanal AWGN di antara pengirim (Tx) dan penerima (Rx). Hasil yang diperoleh dari percobaan berupa kualitas rata-rata gambar pada video yang diukur menggunakan metode pengukuran structural-similarity-index (SSIM). Dilakukan juga pengukuran terhadap jumlah bit-error-rate BER pada bitstream DVB-T. Percobaan yang dilakukan dapat menunjukkan seberapa besar sensitifitas bitrate dan GOP dari video pada transmisi DVB-T dengan kesimpulan semakin besar bitrate maka akan semakin buruk nilai kualitas gambarnya, dan semakin kecil nilai GOP maka akan semakin baik nilai kualitasnya. Penilitian diharapkan dapat dikembangkan menggunakan deep learning untuk memperoleh frame struktur yang tepat di kondisi-kondisi tertentu dalam proses transmisi televisi digital.

scholarly journals Design and Implementation of a Chaotic Scheme in Additive White Gaussian Noise Channel

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Nizar Al Bassam ◽  
Oday Jerew
Keyword(s):  
Bit Error Rate ◽  
Gaussian Noise ◽  
Chaotic Systems ◽  
Gaussian Approximation ◽  
Additive White Gaussian Noise ◽  
Design And Implementation ◽  
Shift Keying ◽  
Transmitted Signal ◽  
Chaos Shift Keying ◽  
Channel Environment

A new chaotic scheme named Flipped Chaotic On-Off Keying (FCOOK) is proposed for binary transmission. In FCOOK, the low correlation value between the stationary signal and its mirrored version is utilized. Transmitted signal for binary 1 is a chaotic segment added to its time flipped (mirrored) version within one bit duration, while in binary 0, no transmission takes place within the same bit duration. The proposed scheme is compared with the standard chaotic systems: Differential Chaos Shift Keying (DCSK) and Correlation Delay Shift Keying (CDSK). The Bit Error Rate (BER) of FCOOK is studied analytically based on Gaussian approximation method. Results show that the BER performance of FCOOK outperforms DCSK and CDSK in AWGN channel environment and with variousEb/Nolevels. Additionally, FCOOK offers a double bit rate compared with the standard DCSK.

scholarly journals A Full-Duplex LED-to-LED Visible Light Communication System

Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1713
Author(s):  
Hyunwoo Jung ◽  
Sung-Man Kim
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Signal To Noise Ratio ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Full Duplex ◽  
Signal To Noise ◽  
Light Emitting ◽  
Half Duplex

We experimentally demonstrated full-duplex light-emitting diode (LED)-to-LED visible light communication (VLC) using LEDs as the transmitter and receiver. Firstly, we investigated the performance dependency on the wavelengths of the LED transmitter and receiver by measuring the rise time and signal-to-noise ratio (SNR). Through the investigation, we were able to choose the optimal LED color set for LED-to-LED VLC using Shannon’s channel capacity law. The bit error rate (BER) results of full-duplex and half-duplex LED-to-LED VLC systems with the optimal LED sets are shown to compare the performance. Furthermore, we discuss major distortions and signal losses in the full-duplex LED-to-LED VLC system.

Design and Simulation of OFDM System Based on Matlab

2014 ◽  
Vol 635-637 ◽  
pp. 1081-1085
Author(s):  
Xin Xin Sha ◽  
Jian Zhou ◽  
Yuan Xue Song
Keyword(s):  
Bit Error Rate ◽  
Error Rate ◽  
Channel Coding ◽  
Signal To Noise Ratio ◽  
Average Power ◽  
System Structure ◽  
Power Ratio ◽  
Basic System ◽  
Ofdm System ◽  
Signal To Noise

OFDM is a key modulation and multiplexing technique. The basic system structure of OFDM is introduced firstly. This paper chose appropriate implementation schemes for channel coding, PAPR(Peak To Average Power Ratio) reducing and synchronization of the OFDM system based on the minimum BER(Bit Error Rate). Finally, the paper realized the simulation and got the BER in different SNR(Signal To Noise Ratio) in the matlab environment .

scholarly journals BIT ERROR RATE ANALYSIS IN DIFFERENT TERRAINS FOR LTE

2019 ◽  
Vol 7 (7) ◽  
pp. 331-339
Author(s):  
Dilshad Mahjabeen ◽  
Moshiur Rahman Tarafder ◽  
T Saikat Ahmed
Keyword(s):  
Rural Area ◽  
Bit Error Rate ◽  
Error Rate ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Rate Analysis ◽  
Receiving Antenna ◽  
Noise Ratio ◽  
Clear Idea

Focus of this paper is mainly evaluating the performance of Long Term Evolution (LTE) system in different terrains such as urban, suburban and rural area. The performance parameters such as, Bit Error Rate (BER) and the Data Throughput are reported in terms of Signal to Noise Ratio (SNR). The system parameters taken into consideration are signal to noise ratio (SNR), number of receiving antenna (RxAn), reference channel and duplex mode. All of the simulations were performed in MATLAB, version 2014a simulink. The results are presented in table and graph which gives clear idea of the effect of environment on signal and receiver sensitivity. Also bit-error-rate, an important parameter in case of receiving signal, is analyzed with respect to SNR values. A comparative analysis of bit-error-rate is performed between three areas for same conditions which proves that LTE signal is well suited in a rural area than that of a suburban and urban area.

Simulated Study for OOK Modulation in the Mud Pulse Telemetry

2015 ◽  
Vol 727-728 ◽  
pp. 809-812
Author(s):  
Bo Qin Xu ◽  
Zhu Jun Zhang ◽  
Jun Wei Hu
Keyword(s):  
Numerical Simulation ◽  
Bit Error Rate ◽  
Error Rate ◽  
Pressure Wave ◽  
Signal To Noise Ratio ◽  
Signal Amplitude ◽  
Modulation Scheme ◽  
Drilling Process ◽  
Signal To Noise ◽  
Process Pressure

Mud pulse telemetry (MPT) transmits data from borehole to surface during the drilling process. Pressure wave is generated in the drilling channel and is used as carrier of the downhole data. Through numerical simulation, this paper analyzes the bit error rate (BER) of mud pulse telemetry under different signal to noise ratio (SNR) based on on-off keying (OOK) modulation scheme. By observing the effect of waveform error on BER, the allowed variation ranges in signal amplitude and period are obtained.

scholarly journals ANÁLISIS DEL DESEMPEÑO DE UN SISTEMA DE COMUNICACIONES CON MODULACIÓN 16/64 QAM BASADO EN HARDWARE RECONFIGURABLE

2014 ◽  
Vol 25 (1) ◽  
pp. 99-112
Author(s):  
Juan Camilo Zemanate Zuñiga ◽  
Julián Andrés Muñoz Hidalgo ◽  
Victor Manuel Quintero Flórez
Keyword(s):  
Bit Error Rate ◽  
Error Rate ◽  
Gaussian Noise ◽  
Additive White Gaussian Noise ◽  
Field Programmable Gate Arrays ◽  
System Generator ◽  
Gate Arrays ◽  
Field Programmable ◽  
El Sistema ◽  
Programmable Gate Arrays

En el presente artículo se analiza el desempeño de un sistema de comunicaciones banda base con Modulación de Amplitud en Cuadratura (QAM, Quadrature Amplitude Modulation), implementado sobre un Arreglo de Compuertas Programables de Campo (FPGA, Field Programmable Gate Arrays), a partir de la Tasa de Error de Bit (BER, Bit Error Rate) y del comportamiento del hardware reconfigurable.El sistema de comunicaciones banda base consideró un canal de Ruido Blanco Gaussiano Aditivo (AWGN, Additive White Gaussian Noise) y las modulaciones 16 QAM y 64 QAM. Se diseñó a través de la herramienta System Generator® de Xilinx®, se validó (a nivel de simulación) por medio de la comparación con un modelo en Simulink ® y se implementó sobre un FPGA Spartan 6 de Xilinx® mediante la descarga de un archivo de programación. Como resultados se obtuvieron las curvas de desempeño del sistema de comunicaciones banda base con modulación 16/64 QAM, las cuales fueron comparadas con las curvas de desempeño teóricas ofrecidas por la herramienta Bertool® de Matlab® para su correspondiente análisis. De este modo, se concluyó que dada la similitud de las curvas de desempeño obtenidas a partir de System Generator®, Simulink®, implementación y Bertool®, el sistema de comunicaciones banda base alcanzó resultados óptimos sobre hardware reconfigurable.

Sign in / Sign up

Export Citation Format

Share Document