scholarly journals Dry Sliding Wear Behavior of B4C and Graphite Particulates Reinforced A356 Alloy Composites

2018 ◽  
Vol 7 (2.23) ◽  
pp. 446
Author(s):  
Pankaj R Jadhav ◽  
B R Sridhar ◽  
Madeva Nagaral ◽  
Jayasheel I Harti ◽  
V Auradi
Keyword(s):  
Sliding Wear ◽  
Hybrid Composites ◽  
Wear Behavior ◽  
A356 Alloy ◽  
Wear Test ◽  
The Other ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Mechanical Assembly ◽  
Wear Protection

The present works manages readiness of the composites by mix stirring method. A356 amalgam 4 wt. % of B4C and A356-4 wt. % of Graphite and A356-4% B4C-4% Graphite hybrid composites were readied. To enhance the wetting and uniform conveyance of the particles, fortifications were preheated to a temperature of 500 Degree Celsius. The arranged MMCs are subjected to examining SEM instrument which affirms the homogenous uniform appropriation of smaller scale B4C and Graphite particles in the lattice combination without agglomeration. The wear protection of arranged composites was examined by performing dry sliding wear test utilizing DUCOM made stick on plate mechanical assembly. The tests were directed at a consistent heap of 3kg and sliding separation of 4000m over a speed of 100, 200 and 300 rpm. So also the other arrangement of investigations were led at consistent sped of 300 rpm and sliding separation of 4000m and with changing heap of 1kg, 2kg, and 3kg. The outcomes demonstrated that the wear protections of the composites were improved than the lattice material.   

Investigation of Process Parameters on Dry Sliding Wear of Self-Lubricating Metal Matrix Composites

2018 ◽  
Author(s):  
Senthil Kumar Velukkudi Santhanam ◽  
Dhanashekar Manickam ◽  
Karthikeyan Sivagnanam
Keyword(s):  
High Performance ◽  
Sliding Wear ◽  
Moringa Oleifera ◽  
Hybrid Composites ◽  
A356 Alloy ◽  
Secondary Reinforcement ◽  
Wear Test ◽  
Wear Behaviour ◽  
Dry Sliding Wear ◽  
Dry Sliding

In recent years, conventional materials are rapidly replaced by advanced aluminium composites due to its lighter in weight and high-performance characteristics. These materials find vast applications in automotive components because of its excellent combination of properties such as high specific strength, high specific stiffness, better dimensional stability and enhanced wear characteristics. The present work is focused on hybrid composites manufactured by stir casting route where the A356 alloy is the matrix and SiC + Moringa Oleifera Ash (MOA) particles as reinforcements. The influence of Moringa Oleifera Ash (MOA) particles (self-lubricant) on the wear behaviour of the composites is studied. Fabricated composites are tested on a pin-on-disc test rig at dry sliding wear conditions to study the influencing input parameters such as load, sliding distance and composites. A356 Aluminium alloy is reinforced with 5% SiC as primary reinforcement, varying MOA particles with 1% and 3% as secondary reinforcement. The design of experiments (DOE) approach using Taguchi method was adopted to perform the experiments according to L9 orthogonal array and analyse the results. From Taguchi analysis, combination of best suited values is identified and reported. Inquest of influential wear test parameters and its effect on wear and friction is determined using the signal-to-noise ratio and analysis of variance (ANOVA).

Dry Sliding Wear Behavior of 2218 Al-Alloy-Al2O3(TiO2) Hybrid Composites

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Vineet Tirth
Keyword(s):  
Wear Rate ◽  
Sliding Wear ◽  
Hybrid Composites ◽  
Wear Behavior ◽  
Dry Sliding Wear ◽  
Aged Alloy ◽  
Dry Sliding ◽  
Al Alloy ◽  
Mathematical Relationship ◽  
Sliding Distance

AA2218–Al2O3(TiO2) composites are synthesized by stirring 2, 5, and 7 wt % of 1:2 mixture of Al2O3:TiO2 powders in molten AA2218 alloy. T61 heat-treated composites characterized for microstructure and hardness. Dry sliding wear tests conducted on pin-on-disk setup at available loads 4.91–13.24 N, sliding speed of 1.26 m/s up to sliding distance of 3770 m. Stir cast AA2218 alloy (unreinforced, 0 wt % composite) wears quickly by adhesion, following Archard's law. Aged alloy exhibits lesser wear rate than unaged (solutionized). Mathematical relationship between wear rate and load proposed for solutionized and peak aged alloy. Volume loss in wear increases linearly with sliding distance but drops with the increase in particle wt % at a given load, attributed to the increase in hardness due to matrix reinforcement. Minimum wear rate is recorded in 5 wt % composite due to increased particles retention, lesser porosity, and uniform particle distribution. In composites, wear phenomenon is complex, combination of adhesive and abrasive wear which includes the effect of shear rate, due to sliding action in composite, and abrasive effect (three body wear) of particles. General mathematical relationship for wear rate of T61 aged composite as a function of particle wt % load is suggested. Fe content on worn surface increases with the increase in particle content and counterface temperature increases with the increase in load. Coefficient of friction decreases with particle addition but increases in 7 wt % composite due to change in microstructure.

Dry Sliding Wear Behavior of Hot Pressed Fe-28Al and Fe-28Al-10Ti Alloys

2011 ◽  
Vol 306-307 ◽  
pp. 425-428
Author(s):  
Jing Li ◽  
Xiao Hong Fan ◽  
De Ming Sun
Keyword(s):  
Plastic Deformation ◽  
Sliding Wear ◽  
Wear Behavior ◽  
Wear Test ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Long Distance ◽  
Wear Performance ◽  
Testing Conditions ◽  
Worn Surface

Fe-28Al and Fe-28Al-10Ti alloys were prepared by mechanical alloying and hot pressing. The phases and dry sliding wear behavior were studied. The results show that Fe-28Al bulk materials are mainly characterized by the low ordered B2 Fe3Al structure with some dispersed Al2O3 particles. Fe-28Al-10Ti exhibits more excellent wear resistance than Fe-28Al, especially after long distance sliding wear test. There are obvious differences in wear mechanisms of Fe-28Al and Fe-28Al-10Ti alloys under different testing conditions. Under the load of 100N, there is plastic deformation on the worn surface of Fe-28Al. The main wear performance of Fe-28Al-10Ti is particle abrasion, the characteristics of which are micro cutting and micro furrows, but micro-crack and layer splitting begin to form on the surface of Fe-28Al. Under the load of 200N, serious plastic deformation and work-hardening lead to rapid crack propagation and eventually the fatigue fracture of Fe-28Al. Plastic deformation is the main wear mechanism of Fe-28Al-10Ti under the load of 200N, which are characterized by micro-crack and small splitting from the worn surface.

Microstructure and Wear Properties of In Situ TiC-Cr7C3/Fe Surface Composite

2011 ◽  
Vol 415-417 ◽  
pp. 170-173
Author(s):  
Jing Wang ◽  
Si Jing Fu ◽  
Yi Chao Ding ◽  
Yi San Wang
Keyword(s):  
Sliding Wear ◽  
Wear Behavior ◽  
Wear Test ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Test Machine ◽  
Wear Properties ◽  
Surface Composite ◽  
The Matrix

A wear resistant TiC-Cr7C3/Fe surface composite was produced by cast technique and in-situ synthesis technique. The microstructure and dry-sliding wear behavior of the surface composite was investigated using scanning electron microscope(SEM), X-ray diffraction(XRD) and MM-200 wear test machine. The results show that the surface composite consists of TiC and Cr7C3as the reinforcing phase, α-Fe and γ-Fe as the matrix. The surface composite has excellent wear-resistance under dry-sliding wear test condition with heavy loads.

Dry Sliding Wear Behavior of A356-ZrO2 Metal Matrix Composite

2015 ◽  
Vol 1125 ◽  
pp. 116-120
Author(s):  
Hamidreza Ghandvar ◽  
Saeed Farahany ◽  
Mohd Hasbullah Idris ◽  
Mohammadreza Daroonparvar
Keyword(s):  
Metal Matrix ◽  
Sliding Wear ◽  
Adhesive Wear ◽  
Wear Behavior ◽  
A356 Alloy ◽  
Matrix Alloy ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Friction Behavior ◽  
Wear And Friction

Dry sliding wear and friction behavior of cast A356 Al-Si alloy and composite containing 5wt. % ZrO2 particles were studied by means of a pins-on-disk apparatus over loads of 5N, 20N and a sliding speed of 0.628m/s. The experimental results showed that the composites exhibited a higher wear resistance in comparison to that of the unreinforced A356 alloy. The friction coefficient of tested materials increased with increasing applied load from 5 to 20 N. FESEM investigations revealed that the wear mechanism of the A356 matrix alloy changed from sever abrasive, adhesive wear into mild abrasion and adhesive wear with addition of 5wt. % ZrO2 reinforcement particles.

scholarly journals “An Investigation of wear behavior of TiO2 nanoparticles mixed with Hybrid powder coating on MS material”

2021 ◽  
Vol 9 (12) ◽  
pp. 2350-2355
Author(s):  
Akshay Shinde
Keyword(s):  
Wear Resistance ◽  
Wear Rate ◽  
Tio2 Nanoparticles ◽  
Sliding Wear ◽  
Wear Behavior ◽  
Wear Test ◽  
Powder Coating ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Maximum Contribution

Abstract: To improve the wear resistance of the hybrid powder coating, TiO2 nanoparticles was hot mixed to form a homogenous mixture with the powder in the range varying wt. dry sliding wear test conducted to determine the wear resistance. The experiments were design according to Taguchi L9 array to find the optimum nanoparticles content required to minimize the wear rate of the coating. ANOVA was used to determine the effect of the parameters on wear rate. It showed that reinforcement has the maximum contribution on the wear rate of the coating as compared to load and frequency. From the graph of means optimum parametric values was obtained at 2 % wt of reinforcement, 2 N load and 2 Hz frequency. The wear rate decrease with the increase in reinforcement. Keywords: Taguchi Method, Tribometer, Hybrid powder, TiO2, Wear Rate.

Role of Zirconia Filler on Mechanical Properties and Dry Sliding Wear Behavior of Glass/Basalt Hybrid Fabric Reinforced Epoxy Composites

2019 ◽  
Vol 895 ◽  
pp. 200-205
Author(s):  
B.S. Kanthraju ◽  
Bheemappa Suresha ◽  
H.M. Somashekar
Keyword(s):  
Mechanical Properties ◽  
Wear Rate ◽  
Sliding Wear ◽  
Wear Behavior ◽  
Mechanical Test ◽  
Basalt Fiber ◽  
Wear Test ◽  
Specific Wear Rate ◽  
Dry Sliding Wear ◽  
Dry Sliding

This paper presents the effect of zirconia filler on mechanical properties and dry sliding wear of bidirectional hybrid (glass and basalt fiber) fabric reinforced epoxy (G-B/E) composites. Fabrication was done by hand layup method followed by compression molding. The effect of zirconia filler loading on mechanical characteristics like hardness, tensile and flexure of fabricated G-B/E composites were determined according to ASTM standards. Also, wear behavior under dry sliding condition was performed using pin-on-disc machine for different applied normal loads/sliding distance. Experimental results reveal that incorporation of zirconia filler improves the mechanical properties. Further, the wear test results indicated addition of zirconia into G-B/E hybrid fiber composites plays important role on specific wear rate under the tribo-conditions selected for the study. Further, inclusion of zirconia into G-B/E composites shows improved wear resistance and addition of 6 wt. % of zirconia exhibits least specific wear rate compared to other hybrid G-B/E composites. In addition, Scanning electron microscope images of selected mechanical test fractured coupons also have been discussed.

Dry Sliding Wear Performance of A356 Alloy with Minor Additions of Magnesium

2014 ◽  
Vol 592-594 ◽  
pp. 175-180 ◽  
Author(s):  
M.S. Prabhudev ◽  
Virupaxi Auradi ◽  
Karodi Venkateshwarlu ◽  
S.M. Suresha ◽  
S.A. Kori
Keyword(s):  
Sliding Wear ◽  
Alloy Composition ◽  
Wear Behavior ◽  
A356 Alloy ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Wear Performance ◽  
Mg Addition ◽  
Mg Content ◽  
Worn Surface

In the present investigation, effect of minor additions of magnesium (Mg) content on the dry sliding wear behavior of A356 alloy has been reported. Alloy composition, normal pressures and sliding distances on A356 alloy has been studied. The worn surfaces were characterized by SEM microanalysis. The results indicate that, the wear rate of A356 alloy increases with increase in normal pressures and sliding distances in all the cases and decreases with 0.7% Mg addition to the A356 alloy. This is due to the change in microstructure resulting in improvement of hardness and strength of the alloy. The worn surface study indicates that, the formation of oxide layer between the mating surfaces during sliding improves sliding wear performance.

Sign in / Sign up

Export Citation Format

Share Document