scholarly journals Design and Analysis of a Wide Stopband Microstrip Dual-band Bandpass Filter

2021 ◽  
Vol 9 (2) ◽  
pp. 83-90
Author(s):  
Salah I. Yahya ◽  
Abbas Rezaei ◽  
Yazen A. Khaleel
Keyword(s):  
Bandpass Filter ◽  
Design Method ◽  
Dual Band ◽  
Equivalent Model ◽  
Harmonic Suppression ◽  
Coupled Resonators ◽  
Transmission Zeros ◽  
Novel Structure ◽  
Compact Size ◽  
Coupled Lines

A novel configuration of a dual-band bandpass filter (BPF) working as a harmonic attenuator is introduced and fabricated. The proposed filter operates at 3 GHz, for UHF and SHF applications, and 6.3 GHz, for wireless applications. The presented layout has a symmetric structure, which consists of coupled resonators. The designing of the proposed resonator is performed by introducing a new LC equivalent model of coupled lines. To verify the LC model of the coupled lines, the lumped elements are calculated. The introduced filter has a wide stopband up to 85 GHz with 28th harmonic suppression, for the first channel, and 13th harmonic suppression, for the second channel. The harmonics are attenuated using a novel structure. Also, the proposed BPF has a compact size of 0.056 λg2. Having several transmission zeros (TZs) that improve the performance of the presented BPF is another feature. The proposed dual-band BPF is fabricated and measured to verify the design method, where the measurement results confirm the simulations.

scholarly journals Wideband Band-Pass Filter Design Using Coupled Line Cross-Shaped Resonator

Electronics ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 2173
Author(s):  
Dong-Sheng La ◽  
Xin Guan ◽  
Shuai-Ming Chen ◽  
Yu-Ying Li ◽  
Jing-Wei Guo
Keyword(s):  
Bandpass Filter ◽  
Filter Design ◽  
Design Method ◽  
Band Pass Filter ◽  
Coupled Line ◽  
Pass Filter ◽  
Transmission Zeros ◽  
Coupled Lines ◽  
Band Pass ◽  
Line Cross

In this paper, a wideband bandpass filter with a coupled line cross-shaped resonator (CLCSR) is proposed. The proposed bandpass filter is composed of two open-end parallel coupled lines, one short-end parallel coupled line, one branch microstrip line, and the parallel coupled line feed structure. With the use of the even and odd mode approach, the transmission zeros and transmission poles of the proposed bandpass filter are analyzed. The coupling coefficient of the parallel coupled line feed structure is big, so the distance between the parallel coupled line is too small to be processed. A three microstirp lines coupled structure is used to realize strong coupling and cross coupling. This structure also can reduce the return loss in passband and increase the out-of-band rejection. The transmission zeros can be adjusted easily by varying the lengths of the open-end parallel coupled line or the short-end parallel coupled line. The proposed bandpass filter is fabricated and measured. The simulated results agree well with the measured ones, which shows that the design method is valid.

Compact dual-mode microstrip bandpass filter based on slotted square patch resonator

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Karthie S. ◽  
Zuvairiya Parveen J. ◽  
Yogeshwari D. ◽  
Venkadeshwari E.
Keyword(s):  
Bandpass Filter ◽  
Filter Design ◽  
Center Frequency ◽  
Dual Mode ◽  
Content Type ◽  
Transmission Zeros ◽  
Compact Size ◽  
Mode Response ◽  
Better Than ◽  
Good Agreement

Purpose The purpose of this paper is to present the design of a compact microstrip bandpass filter (BPF) in dual-mode configuration loaded with cross-loop and square ring slots on a square patch resonator for C-band applications. Design/methodology/approach In the proposed design, the dual-mode response for the filter is realized with two transmission zeros (TZs) by the insertion of a perturbation element at the diagonal corner of the square patch resonator with orthogonal feed lines. Such TZs at the edges of the passband result in better selectivity for the proposed BPF. Moreover, the cross-loop and square ring slots are etched on a square patch resonator to obtain a miniaturized BPF. Findings The proposed dual-mode microstrip filter fabricated in RT/duroid 6010 substrate using PCB technology has a measured minimum insertion loss of 1.8 dB and return loss better than 24.5 dB with a fractional bandwidth (FBW) of 6.9%. A compact size of 7.35 × 7.35 mm2 is achieved for the slotted patch resonator-based dual-mode BPF at the center frequency of 4.76 GHz. As compared with the conventional square patch resonator, a size reduction of 61% is achieved with the proposed slotted design. The feasibility of the filter design is confirmed by the good agreement between the measured and simulated responses. The performance of the proposed filter structure is compared with other dual-mode filter works. Originality/value In the proposed work, a compact dual-mode BPF is reported with slotted structures. The conventional square patch resonator is deployed with cross-loop and square ring slots to design a dual-mode filter with a square perturbation element at its diagonal corner. The proposed filter exhibits compact size and favorable performance compared to other dual-mode filter works reported in literature. The aforementioned design of the dual-mode BPF at 4.76 GHz is suitable for applications in the lower part of the C-band.

scholarly journals Dual band Stepped Impedance Interdigital Microstrip Filter for LTE Bands

2019 ◽  
Vol 4 (7) ◽  
pp. 28-30
Author(s):  
William Johnson ◽  
Cavin Roger Nunes ◽  
Savio Sebastian Dias ◽  
Siddhi Suresh Parab ◽  
Varsha Shantaram Hatkar
Keyword(s):  
Insertion Loss ◽  
Bandpass Filter ◽  
Dual Band ◽  
Band Pass Filter ◽  
Coupled Resonators ◽  
Microstrip Filter ◽  
Resonant Frequencies ◽  
Pass Filter ◽  
Band Pass ◽  
Low Insertion Loss

In this paper, a dual band microstrip bandpass filter has been proposed utilizing three edge coupled resonators, interdigital stubs and DGS technique. To enhance the coupling degree, two interdigital coupled feed lines are employed in this filter. The suppressing cell consists of stepped impedance ladder type resonators, which provides a wide stopband. The proposed suppressing cell has clear advantages like low insertion loss in the passband and suitable roll off. The frequency response of the filter looks like a standard dual band band-pass filter. The filter exhibits a dual passband with resonant frequencies at 2.2GHz and 3.45GHz covers LTE1 and LTE22 bands.

scholarly journals Closed-loop ring resonator topology for bandpass filter applications

2020 ◽  
Vol 17 (3) ◽  
pp. 1422
Author(s):  
Norfishah Ab Wahab ◽  
M. N. Md Tan ◽  
M. N. Hushim
Keyword(s):  
Transmission Lines ◽  
Closed Loop ◽  
Bandpass Filter ◽  
Ring Resonator ◽  
Single Mode ◽  
Ring Structure ◽  
Transmission Zeros ◽  
Quarter Wavelength ◽  
Coupled Lines ◽  
Loop Ring

<p class="Pa41">This paper presents a single mode pseudo-elliptic bandpass resonator based on closed-loop ring topology. The resonator is built from six quarter wavelength transmission lines to form a square closed-loop ring structure. This structure creates transmission zeros at the lower and upper sidebands so that high selectivity bandpass filter response is achieved. The advantage of this topology is that the design is less complex since no perturbation is needed on the ring lines for creation of transmission zeros. Higher-order filters can be constructed by introducing quarter-wavelength coupled-lines, coupled at both input and output of the closed-loop ring resonator. For proof of concept, the filters are designed at 10 GHz up to 3<sup>rd</sup> order, simulated using full-wave electromagnetic simulator on microstrip substrate, <em>FR-4</em> with characteristics given as <em>Ԑr </em>= 4.70, <em>h </em>= 1.499 mm and <em>tan δ </em>= 0.012.  The filters are simulated and responses are found to be agreeable with the proposed idea.</p>

scholarly journals Design of a Microwave Lowpass – Bandpass Filter using Deep Learning and Artificial Intelligence

2021 ◽  
Vol 3 (1) ◽  
pp. 1-16
Author(s):  
Saeed Roshani ◽  
◽  
Hossein Heshmati ◽  
Sobhan Roshani ◽  
◽  
...  
Keyword(s):  
Artificial Intelligence ◽  
Deep Learning ◽  
Insertion Loss ◽  
Dual Band ◽  
Transmission Zeros ◽  
Compact Size ◽  
Electrical Devices ◽  
Low Pass ◽  
Artificial Neural Network Ann ◽  
Better Than

In this paper, a lowpass – bandpass dual band microwave filter is designed by using deep learning and artificial intelligence. The designed filter has compact size and desirable pass bands. In the proposed filter, the resonators with Z-shaped and T-shaped lines are used to design the low pass channel, while coupling lines, stepped impedance resonators and open ended stubs are utilized to design the bandpass channel. Artificial neural network (ANN) and deep learning (DL) technique has been utilized to extract the proposed filter transfer function, so the values of the transmission zeros can be located in the desired frequency. This technique can also be used for the other electrical devices. The lowpass channel cut off frequency is 1 GHz, with better than 0.2 dB insertion loss. Also, the bandpass channel main frequency is designed at 2.4 GHz with 0.5 dB insertion loss in the passband.

Miniaturized Dual-Band Bandpass Filter Using Embedded Dual-Mode Resonator with Controllable Bandwidths

Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
Chuanming Zhu ◽  
Jin Xu ◽  
Wei Kang ◽  
Zhenxin Hu ◽  
Wen Wu
Keyword(s):  
Insertion Loss ◽  
Degrees Of Freedom ◽  
Bandpass Filter ◽  
The Other ◽  
Dual Band ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Low Insertion Loss ◽  
Multiple Transmission ◽  
Mode Resonator

AbstractIn this paper, a miniaturized dual-band bandpass filter (DB-BPF) using embedded dual-mode resonator (DMR) with controllable bandwidths is proposed. Two passbands are generated by two sets of resonators operating at two different frequencies. One set of resonators is utilized not only as the resonant elements that yield the lower passband, but also as the feeding structures with source-load coupling to excite the other to produce the upper passband. Sufficient degrees of freedom are achieved to control the center frequencies and bandwidths of two passbands. Moreover, multiple transmission zeros (TZs) are created to improve the passband selectivity of the filter. The design of the filter has been demonstrated by the measurement. The filter features not only miniaturized circuit sizes, low insertion loss, independently controllable central frequencies, but also controllable bandwidths and TZs.

Miniaturized Bandpass Filter with Wide Stopband using Spiral Configuration of Stepped Impedance Resonator

Frequenz ◽  
2018 ◽  
Vol 72 (9-10) ◽  
pp. 455-458 ◽  
Author(s):  
Vivek Singh ◽  
Vinay Kumar Killamsetty ◽  
Biswajeet Mukherjee
Keyword(s):  
Bandpass Filter ◽  
Short Circuit ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Transmission Zeros ◽  
Quarter Wavelength ◽  
Rejection Level ◽  
Compact Size ◽  
Band Pass ◽  
Stepped Impedance Resonator

Abstract In this letter, a miniaturized Band Pass Filter (BPF) with wide stopband centered at 0.350 GHz for TETRA band applications is proposed using a Spiral Short Circuit quarter wavelength Stepped Impedance Resonator (SSC-SIR) and a stub loaded on feed line for enhancement of rejection level in the stopband. Spiral configuration of the resonator is used for the miniaturization of BPF. The proposed BPF provides a 3dB fractional bandwidth of 13.7 % with two transmission zeros in the lower and upper stopband to provide good selectivity and four transmission zeros which provide wide stopband upto 6.86f0. Proposed BPF has a very compact size of 0.064λg×0.062λg.

Miniaturized Wideband Bandpass Filter based on Capacitor-loaded One-eighth Wavelength Coupled Line

2021 ◽  
Vol 36 (7) ◽  
pp. 865-871
Author(s):  
Jin Shi ◽  
Jiancheng Dong ◽  
Kai Xu ◽  
Lingyan Zhang
Keyword(s):  
Insertion Loss ◽  
Simple Structure ◽  
Bandpass Filter ◽  
State Of The Art ◽  
Center Frequency ◽  
Fractional Bandwidth ◽  
Coupled Line ◽  
Transmission Zeros ◽  
Compact Size ◽  
Multiple Transmission

A novel miniaturized wideband bandpass filter (BPF) using capacitor-loaded microstrip coupled line is proposed. The capacitors are loaded in parallel and series to the coupled line, which makes the filter just require one one-eighth wavelength coupled line and achieve filtering response with multiple transmission poles (TPs) and transmission zeros (TZs). Compared with the state-of-the-art microstrip wideband BPFs, the proposed filter has the advantages of compact size and simple structure. A prototype centered at 1.47 GHz with the 3-dB fractional bandwidth of 86.5% is demonstrated, which exhibits the compact size of 0.003λ2 g (λg is the guided wavelength at the center frequency) and the minimum insertion loss of 0.37 dB.

Dual-mode resonator filter with improved feed-lines for dual-band applications

2020 ◽  
Vol 71 (6) ◽  
pp. 433-435
Author(s):  
Shan Shan Gao ◽  
Jia-Lin Li ◽  
Zhe Lin Zhu ◽  
Jia Li Xu ◽  
Yong Xin Zhao
Keyword(s):  
Simple Structure ◽  
High Selectivity ◽  
Bandpass Filter ◽  
Dual Band ◽  
Dual Mode ◽  
Transmission Zeros ◽  
Good Consistency ◽  
Mode Resonator

AbstractAn improved feedline configuration for dual-mode resonator filter is investigated in this paper. Based on the introduced topology, a dual-mode dual-band bandpass filter with center frequencies of 1.8 and 2.4 GHz is optimally designed, fabricated and tested. The introduced dual-band bandpass filter has simple structure and enables high selectivity to be realized due to two pairs of transmission zeros located near to the lower and upper passband, respectively. Both measured and simulated performances are presented with good consistency.

Sign in / Sign up

Export Citation Format

Share Document