A? Fuzzy Controller Based High Efficient Pulse Amplitude Modulation Control for a Permanent Magnet Synchronous Motor

2012 ◽  
Vol 13 (1) ◽  
Author(s):  
Abdul Motin Howlader ◽  
Naomitsu Urasaki ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Ahmed Yousuf Saber
Keyword(s):  
Control System ◽  
Permanent Magnet ◽  
Amplitude Modulation ◽  
Fuzzy Controller ◽  
Permanent Magnet Synchronous Motor ◽  
Pulse Amplitude ◽  
Synchronous Motor ◽  
Control Technique ◽  
Pulse Amplitude Modulation ◽  
High Efficient

A pulse amplitude modulation (PAM) control can adjust the DC-link voltage of a motor drive. A bi-directional buck-boost DC-DC converter is required at the primary side of PWM-VSI to implement PAM control. This paper is proposed PAM control technique for a permanent magnet synchronous motor (PMSM) based on fuzzy control system. The PAM coefficient (K_PAM) is a constant value for a conventional PAM control system. It requires online adjustment to improve overall performance of a PAM control system. The proposed fuzzy controller based PAM control regulates the K_PAM according to online commanded load voltage. This paper deals with different operation modes of a bi-directional buck-boost DC-DC cascade converter, motoring (accelerate and steady state) and braking operations of a PMSM at different load conditions and speeds. The total harmonic distortion (THD) and system efficiency are also shown in this paper. Effectiveness of the proposed method is confirmed by simulation results.

The Study of Control Strategy for Sensor-Less PMSM

2014 ◽  
Vol 1006-1007 ◽  
pp. 575-580
Author(s):  
Qing Xie Chen ◽  
Jing Jing Chen ◽  
Yi Biao Fan
Keyword(s):  
Control System ◽  
Permanent Magnet ◽  
High Precision ◽  
Control Strategy ◽  
Control Algorithm ◽  
Simulation Experiment ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Single Chip

Targeting development of control system of a permanent magnet synchronous motor applied to high precision requirement, A strategy is researched to develop a single chip with built-in sensor-less control algorithm which is used as the control core of PMSM control system, the composition of the hardware and the realization of software of the chip are designed, and the simulation experiment is carried out to verify feasibility and rationality of the control strategy as well.

scholarly journals Switching Regulation in the Control of 5-Phase Permanent Magnet Synchronous Motor Fed by 3×5 Direct Matrix Converter

2021 ◽  
Vol 23 (1) ◽  
pp. 27-35
Author(s):  
Muhammad Ishaq ◽  
Yanbo Che ◽  
Kifayat Ullah
Keyword(s):  
Permanent Magnet ◽  
Predictive Control ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Matrix Converter ◽  
Control Technique ◽  
Frequency Regulation ◽  
Frequency Variation ◽  
Switching Frequency ◽  
Output Current

Matrix converter is an AC-AC direct power converter comprising of an array of bi-directional switches. It does not require an intermediate DC-link and allows sinusoidal output waveforms with varying amplitudes and frequencies. The configuration of these bi-directional switches decides the number of inputs and outputs of the matrix converter. This research uses a direct matrix converter (DMC) as a phase-changing device that can convert a three-phase AC voltage into a 5-phase AC voltage. The DMC is modulated with the model predictive control algorithm. The output of DMC is fed to a five-phase permanent magnet synchronous motor (PMSM). The model predictive current control technique for DMC is carried out by developing a mathematical model of an input filter and PM motor used as a load. The predictive control of DMC results in sinusoidal output current, and it also enables the frequency variation in the output current. This frequency variation is useful in controlling the speed of the motor connected to the load. After controlling the 5-phase motor, the switching frequency regulation is done to observe its effect on the motor's stator current waveforms. Switching frequency regulation helps to limit the unnecessary switching of DMC. We developed a MATLAB-based Simulink model to study PMSM, and detailed results are presented. The results show that switching regulation can significantly reduce the switching frequency without compromising the current waveform quality.

Study on speed sensorless system of permanent magnet synchronous motor based on improved direct torque control

2021 ◽  
pp. 014233122110629
Author(s):  
Xiaoxin Hou ◽  
Mingqian Wang ◽  
Guodong You ◽  
Jinming Pan ◽  
Xiating Xu ◽  
...  
Keyword(s):  
Control System ◽  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Switching Frequency ◽  
Speed Sensorless ◽  
Stator Resistance

The traditional direct torque control system of permanent magnet synchronous motor has many problems, such as large torque ripple and variable switching frequency. In order to improve the dynamic and static performance of the control system, a new torque control idea and speed sensorless control scheme are proposed in this paper. First, by deriving the equation of torque change rate, an improved torque controller is designed to replace the torque hysteresis controller of the traditional direct torque control. The improved direct torque control strategy can significantly reduce the torque ripple and keep the switching frequency constant. Then, based on the improved direct torque control and considering the sensitivity of the stator resistance to temperature change, a speed estimator based on the model reference adaptive method is designed. This method realizes the stator resistance on-line identification and further improves the control precision of the system. The performance of the traditional direct torque control and the improved direct torque control are compared by simulation and experiment under different operating conditions. The simulation and experimental results are presented to support the validity and effectiveness of the proposed method.

scholarly journals Operation modes and control algorithms of anisotropic permanent magnet synchronous motor (IPMSM)

2019 ◽  
Vol 140 ◽  
pp. 10006
Author(s):  
Aleksandr Lutonin ◽  
Andrey Shklyarskiy ◽  
Yaroslav Shklyarskiy
Keyword(s):  
Control System ◽  
Permanent Magnet ◽  
Control Strategy ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Speed Limit ◽  
Maximum Torque ◽  
Field Weakening ◽  
Output Torque ◽  
And Control

This paper represents control strategy of anisotropic permanent magnet synchronous motor (IPMSM) in the field-weakening region. Field weakening controller allows to increase maximum achievable speed with output torque reduction. Proposed control system consists of four general modes: MTPA (maximum torque per ampere), MC (maximum current), FW (field weakening), and MTPV (maximum torque per voltage) which must be chosen accordingly to motor speed, current and torque references. Operation point is found as an intersection of torque hyperbola and voltage ellipse curves in d-q motor’s current reference frame involving motor parameters’ limits. However, due to nonlinear dependence between torque and voltage equations, it is quite complicated to obtain both right control mode selection and reference output calculation. In order to solve this problem, a unified control algorithm adopted for wide speed and torque reference with online constraints calculation is proposed. Matlab/Simulink control model of PMSM motor and control system were designed in order to show developed strategy performance. Simulation results shows increasing of speed limit by more than 2.5 times related to nominal speed with high controller’s response. However, speed limit increasing leads to a decrease in motor’s output torque. Due to this fact, presented control strategy is not suitable for applications where nominal torque level is essential for all speed operation points.

Sign in / Sign up

Export Citation Format

Share Document