scholarly journals Kinetic and equilibrium studies on adsorption of Reactive Blue 19 dye from aqueous solutions by nanohydroxyapatite adsorbent

2016 ◽  
Vol 42 (2) ◽  
pp. 3-11 ◽  
Author(s):  
Gabriela Ciobanu ◽  
Simona Barna ◽  
Maria Harja
Keyword(s):  
Dye Removal ◽  
Dye Adsorption ◽  
Kinetic Studies ◽  
Solution Concentration ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Reactive Blue 19 ◽  
Pseudo Second Order

AbstractIn the present study the adsorption of Reactive Blue 19 dye on the hydroxyapatite (HAp) nanopowders was investigated. The batch adsorption experiments were performed by monitoring the adsorbent dosage, contact time, dye solution concentration, pH and temperature. At pH 3 and 20°C, high dye removal rates of about 95.58% and 86.95% for the uncalcined and calcined nanohydroxyapatites, respectively, were obtained. The kinetic studies indicated the dye adsorption onto nanohydroxyapatite samples to follow a pseudo-second order model. The Langmuir isotherm was found to be the best to represent the equilibrium with experimental data. The maximum adsorption capacity of uncalcined and calcined nanohydroxyapatite samples has been found to be 90.09 mg/g and 74.97 mg/g, respectively.

scholarly journals A Novel Geopolymer Foam Based On ZSM-5 Zeolite Fabricated Using Templating Emulsion/Chemical Foaming Method and Its Application in Batch and Continuous Dye Removal Systems

2022 ◽  
Author(s):  
Mahboobeh Monjezi ◽  
Vahid Javanbakht
Keyword(s):  
Adsorption Capacity ◽  
Dye Removal ◽  
Adsorption Process ◽  
Dye Adsorption ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Continuous Systems ◽  
Green Materials ◽  
Pseudo Second Order ◽  
Chemical Foaming

Abstract Geopolymers as sustainable and environmentally friendly “green materials”, can be synthesized by utilizing waste material and by-products. A porous geopolymer foam adsorbent based on ZSM-5 zeolite was prepared using templating emulsion/chemical foaming method in different conditions and used for dye removal in batch and continuous systems. The parameters affecting the dye adsorption including temperature, concentration, and pH, kinetics, isotherm, and thermodynamics of the process were investigated. The results of the geopolymer foam synthesis showed that thermal pretreatment of the zeolite has a positive effect on the strength and adsorption capacity. Moreover, the increase in sodium silicate more than the stoichiometric reduces the strength and adsorption capacity. The findings obtained from the batch adsorption process showed that the adsorption kinetics of the pseudo-second-order model and the adsorption isotherm of the Temkin model is adjusted with the experimental data. Thermodynamic results indicated that the process of dye adsorption with geopolymer foam is exothermic. The results from continuous experiments indicated more compatibility of the adsorption process with the models of Thomas and Bohart-Adams. The maximum adsorption capacity of methylene blue in batch and continuous processes was 9.82 and 8.17 mg/g. The adsorbent reduction was performed successfully by chemical and thermal processes.

scholarly journals Highly Effective Covalently Crosslinked Composite Alginate Cryogels for Cationic Dye Removal

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 178
Author(s):  
Serap Sezen ◽  
Vijay Kumar Thakur ◽  
Mehmet Murat Ozmen
Keyword(s):  
Adsorption Capacity ◽  
Dye Removal ◽  
Low Cost ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
High Porosity ◽  
Order Model ◽  
Removal Capacity ◽  
Pseudo Second Order ◽  
The One

Currently, macroporous hydrogels have been receiving attention in wastewater treatment due to their unique structures. As a natural polymer, alginate is used to remove cationic dyes due to its sustainable features such as abundance, low cost, processability, and being environmentally friendly. Herein, alginate/montmorillonite composite macroporous hydrogels (cryogels) with high porosity, mechanical elasticity, and high adsorption yield for methylene blue (MB) were generated by the one-step cryogelation technique. These cryogels were synthesized by adding montmorillonite into gel precursor, followed by chemical cross-linking employing carbodiimide chemistry in a frozen state. The as-prepared adsorbents were analyzed by FT-IR, SEM, gel fraction, swelling, uniaxial compression, and MB adsorption tests. The results indicated that alginate/montmorillonite cryogels exhibited high gelation yield (up to 80%), colossal water uptake capacity, elasticity, and effective dye adsorption capacity (93.7%). Maximum adsorption capacity against MB was 559.94 mg g−1 by linear regression of Langmuir model onto experimental data. The Pseudo-Second-Order model was fitted better onto kinetic data compared to the Pseudo-First-Order model. Improved porosity and mechanical elasticity yielding enhanced dye removal capacity make them highly potential alternative adsorbents compared to available alginate/montmorillonite materials for MB removal.

Adsorptive Removal of Cd(II) by a Novel Extracellular Biopolymer Produced by Pseudomonas alcaligenes: Equilibrium and Kinetics

2010 ◽  
Vol 171-172 ◽  
pp. 15-18
Author(s):  
Zeng Quan Ji ◽  
Tian Hai Wang ◽  
Kai Hong Luo ◽  
Yao Qing Wang
Keyword(s):  
Chemical Interaction ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Metallic Ions ◽  
Equilibrium Studies ◽  
Kinetic Rates ◽  
Equilibrium And Kinetics ◽  
Potential Applications ◽  
Pseudo Second Order ◽  
Pseudomonas Alcaligenes

An extracellular biopolymer (PFC02) produced by Pseudomonas alcaligenes was used as an alternative biosorbent to remove toxic Cd(II) metallic ions from aqueous solutions. The effect of experimental parameters such as pH, Cd(II) initial concentration and contact time on the adsorption was studied. It was found that pH played a major role in the adsorption process, the optimum pH for the removal of Cd(II) was 6.0. The FTIR spectra showed carboxyl, hydroxyl and amino groups of the PFC02 were involved in chemical interaction with the Cd(II) ions. Equilibrium studies showed that Cd(II) adsorption data followed Langmuir model. The maximum adsorption capacity (qmax) for Cd(II) ions was estimated to be 93.55 mg/g. The kinetic studies showed that the kinetic rates were best fitted to the pseudo-second-order model. The study suggestted that the novel extracellular biopolymer biosorbent have potential applications for removing Cd(II) from wastewater.

scholarly journals Adsorption and Equilibrium Studies on the Removal of Methyl Red from Aqueous Solution Using White Potato Peel Powder

2017 ◽  
Vol 72 ◽  
pp. 52-64 ◽  
Author(s):  
Conrad K. Enenebeaku ◽  
Nnaemeka J. Okorocha ◽  
Uchechi E. Enenebeaku ◽  
Ikechukwu C. Ukaga
Keyword(s):  
Aqueous Solution ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Methyl Red ◽  
Potato Peel ◽  
White Potato ◽  
Equilibrium Studies

The potential of white potato peel powder for the removal of methyl red (MR) dye from aqueous solution was investigated. The adsorbent was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were studied to observe their effects in the dye adsorption process. The optimum conditions for the adsorption of MR onto the adsorbent (WPPP) was found to be contact (80 mins), pH (2) and temperature (303K) for an initial MR dye concentration of 50mg/l and adsorbent dose of 1.0g. The experimental equilibrium adsorption data of the (MR) dye fitted best and well to the Freundlich isotherm model. The maximum adsorption capacity was found to be 30.48mg/g for the adsorption of MR. The kinetic data conforms to the pseudo – second order kinetic model.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

scholarly journals Removal of Crystal Violet Dye from Aqueous Solutions onto Date Palm Fiber by Adsorption Technique

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mashael Alshabanat ◽  
Ghadah Alsenani ◽  
Rasmiah Almufarij
Keyword(s):  
Crystal Violet ◽  
Date Palm ◽  
Dye Removal ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Date Palm Fibers ◽  
Crystal Violet Dye ◽  
Pseudo Second Order ◽  
Influence Of Ph

The adsorption of crystal violet (CV) onto date palm fibers (DPFs) was examined in aqueous solution at 25°C. The experimental maximum adsorption capacity value was0.66×10−6. Langmuir, Freundlich, Elovich and Temkin models were applied to describe the equilibrium isotherms. The influence of pH and temperature on dye removal was evaluated. The percentage removal of CV dye by adsorption onto DPF at different pH and temperatures showed that these factors play a role in the adsorption process. Thermodynamic analysis was performed, and the Gibbs free energyΔGο, enthalpy changeΔHο, and entropyΔSοwere calculated. The negative values ofΔGοindicate spontaneous adsorption. The negative value ofΔHοindicates that the interaction between CV and DPF is exothermic, and the positive value ofΔSοindicates good affinity between DPF and CV. The kinetic data were fitted to a pseudo-second-order model.

scholarly journals Biosorption of lead contaminated wastewater using cattails (Typha angustifolia) leaves: Kinetic studies

2011 ◽  
Vol 76 (7) ◽  
pp. 1037-1047 ◽  
Author(s):  
Sharain Ling ◽  
Collin Joseph ◽  
How Eng
Keyword(s):  
Linear Regression Analysis ◽  
Model Fitting ◽  
Kinetic Studies ◽  
Second Order ◽  
Batch Adsorption ◽  
Typha Angustifolia ◽  
Order Model ◽  
Effective Removal ◽  
Pseudo Second Order ◽  
The Common

In this work, dried leaves of Typha angustifolia (TA), also known as the common cattail, were used as an adsorbent in kinetic studies of Pb(II) adsorption from synthetic aqueous solutions. Batch adsorption studies with dried TA leaves were conducted and they were able to adsorb Pb(II) from 100 mL of a 25 mg L-1 Pb(II) solution effectively with the optimized dosage of 0.6 g. Adsorption equilibrium was achieved within 8 hours with an effective removal percentage of 86.04 %. Adsorption kinetics was further evaluated using four kinetic models, i.e., the pseudofirst order, pseudo-second order, intraparticle diffusion and Elovich model. Fitting of the data was performed based on linear regression analysis. The sorption kinetic data fitted best to the pseudo-second order model with an R2 of 0.9979, followed closely by the Elovich model with an R2 of 0.9952. The obtained results showed the adsorption of Pb(II) by TA leaves, which is an abundant biological material, is feasible, cheap and environmentally friendly.

Parametric and adsorption kinetic studies of methylene blue removal from simulated textile water using durian (Durio zibethinus murray) skin

2015 ◽  
Vol 72 (6) ◽  
pp. 896-907 ◽  
Author(s):  
S. M. Anisuzzaman ◽  
Collin G. Joseph ◽  
D. Krishnaiah ◽  
A. Bono ◽  
L. C. Ooi
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Durio Zibethinus

In this study, durian (Durio zibethinus Murray) skin was examined for its ability to remove methylene blue (MB) dye from simulated textile wastewater. Adsorption equilibrium and kinetics of MB removal from aqueous solutions at different parametric conditions such as different initial concentrations (2–10 mg/L), biosorbent dosages (0.3–0.7 g) and pH solution (4–9) onto durian skin were studied using batch adsorption. The amount of MB adsorbed increased from 3.45 to 17.31 mg/g with the increase in initial concentration of MB dye; whereas biosorbent dosage increased from 1.08 to 2.47 mg/g. Maximum dye adsorption capacity of the durian skin was found to increase from 3.78 to 6.40 mg/g, with increasing solution pH. Equilibrium isotherm data were analyzed according to Langmuir and Freundlich isotherm models. The sorption equilibrium was best described by the Freundlich isotherm model with maximum adsorption capacity of 7.23 mg/g and this was due to the heterogeneous nature of the durian skin surface. Kinetic studies indicated that the sorption of MB dye tended to follow the pseudo second-order kinetic model with promising correlation of 0.9836 < R2 < 0.9918.

Adsorption of methyl violet from aqueous solution using brown algae Padina sanctae-crucis

2018 ◽  
Vol 43 (6) ◽  
pp. 623-631 ◽  
Author(s):  
Reza Mahini ◽  
Hossein Esmaeili ◽  
Rauf Foroutan
Keyword(s):  
Aqueous Solutions ◽  
Brown Algae ◽  
Contact Time ◽  
Methyl Violet ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Study ◽  
Freundlich Isotherms ◽  
Pseudo Second Order

Abstract Objective The presence of dyes in the water is toxic and harmful to human body so, it must be removed from the water. In the present study, the removal of methyl violet (MV) from aqueous solutions using brown algae “Padina sanctae-crucis” was investigated. Materials and methods The rate of adsorption was investigated under various parameters such as contact time (5–200), pH (2–11), dye concentration (10–60 mg/L), amount of adsorbent (0.25–5 g/L) and temperature (25–45°C). Results The maximum adsorption was achieved in 10 mg/L, pH=8 and adsorbent dose 2 g/L and 80 min contact time for removal of MV from aqueous solutions. Kinetic studies showed that the pseudo second-order model describes adsorbent kinetic behavior better. Besides, experimental data have been modeled using Langmuir and Freundlich isotherms and the results showed that both models are proper to describe adsorption isotherm behavior. In addition, the equilibrium study shows that the adsorption was physical and favorable. Moreover, a thermodynamic study revealed that the adsorption process is exothermic and spontaneously in nature. Furthermore, Maximum adsorption capacity using adsorbent was 10.02 mg/g. Conclusions It could be concluded that the P. sanctae-crucis biomass is a good adsorbent for removing MV dyes from aqueous solutions.

scholarly journals Adsorption Characteristics of Pristine and Magnetic Olive Stones Biochar with Respect to Clofazimine

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 963
Author(s):  
Marwa El-Azazy ◽  
Iman Nabil ◽  
Siham S. Hassan ◽  
Ahmed S. El-Shafie
Keyword(s):  
Cost Effective ◽  
Sem Analysis ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Adsorption Efficiency ◽  
Equilibrium Studies ◽  
Thermal Stabilities ◽  
Olive Stone ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Olive stone biochars (OSBC), both pristine and following magnetization (MAG–OSBC), were utilized as eco-friendly and cost-effective sorbents for the antituberculosis, clofazimine (CLOF). Morphologies, textures, surface functionalities, and thermal stabilities of both adsorbents were explored using SEM, EDX, TEM, BET, FT-IR, Raman, XRD and TGA analyses. SEM analysis showed meso- and macroporous surfaces. BET data showed that the MAG–OSBC possesses a larger surface area (33.82 m2/g) and pore volume. Batch adsorption studies were conducted following the experimental scenario of Box–Behnken (BB) design. The adsorption efficiency of both adsorbents was evaluated in terms of the % removal (%R) and the sorption capacity (qe, mg/g). Dependent variables (%R and qe) were maximized as a function of four factors: pH, sorbent dose (AD), the concentration of CLOF ([CLOF]), and contact time (CT). A %R of 98.10% and 98.61% could be obtained using OSBC and MAG–OSBC, respectively. Equilibrium studies indicated that both Langmuir and Freundlich models were perfectly fit for adsorption of CLOF. Maximum adsorption capacity (qmax) of 174.03 mg/g was obtained using MAG–OSBC. Adsorption kinetics could be best illustrated using the pseudo-second-order (PSO) model. The adsorption–desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 92% after the sixth cycles.

Sign in / Sign up

Export Citation Format

Share Document