scholarly journals Investigation into the UV-Protection of Woven Fabrics Composed of Metallic Weft Yarns

2016 ◽  
Vol 16 (3) ◽  
pp. 154-159 ◽  
Author(s):  
Mohammad Ghane ◽  
Ehsan Ghorbani
Keyword(s):  
Production Process ◽  
Uv Radiation ◽  
Electromagnetic Waves ◽  
Structural Parameters ◽  
Measuring Method ◽  
Woven Fabrics ◽  
Uv Protection ◽  
Uv Absorbency

Abstract The destructive effects of sun UV radiation on human skins are now very clear to everyone. Most of the present studies were focused on the fabrics’ structural parameters such as density, warp and weft yarns finenesses, fabric pattern and printing or finishing treatments applied to the fabrics. The aim of this work is achieving a technique through which the produced fabrics possess a higher UV-protection ability. For this purpose, two different metals including aluminium and copper yarns were employed in fabrics production process and their effects on UV-protection ability of the produced fabrics were investigated. Six different fabric samples comprised of either cotton/polyester, nylon yarns as the warp yarns as well as either aluminium or copper yarns as the weft yarns were produced. Using the spectrophotometer technique, which is known as one of the UPF measuring method, the absorbency and reflectivity of fabrics within the specified range of electromagnetic waves (specially the UV radiation) were determined. The results illustrated that the higher UV absorbency was related to the fabric possessing the copper yarns in their structures. It was concluded that the absorption ability of nylon fabrics is higher than that of the cotton/polyester samples.

scholarly journals Use of Extended Cover Factor Theory in UV Protection of Woven Fabric

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1188
Author(s):  
Klara Kostajnšek ◽  
Krste Dimitrovski
Keyword(s):  
Woven Fabrics ◽  
Uv Protection ◽  
Woven Fabric ◽  
Simplified Model ◽  
Light Penetration ◽  
Protective Properties ◽  
Cover Factor ◽  
Coefficient Of Reflection ◽  
Uv Protective Properties

The paper presents an extension of existed cover factor theory more suitable for the evaluation of light penetration through a net woven fabrics structure. It also introduces a new simplified model of predicting the ultraviolet (UV) protective properties of woven fabrics assuming that the coefficient of reflection (KR), transmission (KT), and absorption (KA) of constitutive yarns are known. Since usually they are not, the procedure of preparation of simulation of proper woven fabric samples without interlacing and with known constructional parameters is also presented. The procedure finishes with a fast and cheap detection of missed coefficient for any type of yarns. There are differences between theoretical and measured results, which are not particularly significant in regard to the purpose and demands of investigation.

The effects of the structural parameters of three-dimensional warp interlock woven fabrics with silver-based hybrid yarns on electromagnetic shielding behavior

2019 ◽  
Vol 90 (11-12) ◽  
pp. 1354-1371
Author(s):  
Marzieh Javadi Toghchi ◽  
Carmen Loghin ◽  
Irina Cristian ◽  
Christine Campagne ◽  
Pascal Bruniaux ◽  
...  
Keyword(s):  
Unit Area ◽  
Structural Parameters ◽  
Three Dimensional ◽  
Woven Fabrics ◽  
Electromagnetic Shielding ◽  
Woven Fabric ◽  
Shielding Effectiveness ◽  
Conductive Material ◽  
Conductive Yarns ◽  
Multifilament Yarns

The main objective of the present study was to investigate the increase in the electromagnetic shielding effectiveness (EMSE) of a set of five variants of three-dimensional (3D) warp interlock woven fabrics containing silver multifilament yarns arranged in a 3D orthogonal grid. The EMSE enlargement as a factor of increasing the quantity of the conductive material per unit area was investigated. The quantity of the conductive material per unit area in a 3D woven fabric can be enlarged by increasing either the yarn undulation or the number of conductive yarn systems, while the yarn density and yarn fineness are fixed. Thus, the binding depth of the conductive warp was gradually increased for the first four variants in order to increase the yarn undulation. Alternatively, the conductive weft system was doubled for the last variant with the aim of increasing the quantity of the conductive component. It should be noted that changing the weave structure requires less effort and energy while keeping the same threading of warps in the reed compared to altering the warp density. The EMSE was measured in an anechoic chamber and the shielding was satisfactory for all the variants in the frequency range of 1–6 GHz (19–44 dB). The results revealed that increasing only 7% of the waviness degree of the conductive warps led to 17% EMSE improvement due to increasing of the conductive yarns through the thickness of the variants. Moreover, no upward EMSE was detected for the last variant, despite the fact that the conductive weft system was doubled.

scholarly journals Antimicrobial Activity and Barrier Properties against UV Radiation of Alkaline and Enzymatically Treated Linen Woven Fabrics Coated with Inorganic Hybrid Material

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5701
Author(s):  
Joanna Olczyk ◽  
Jadwiga Sójka-Ledakowicz ◽  
Anetta Walawska ◽  
Anna Antecka ◽  
Katarzyna Siwińska-Ciesielczyk ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Uv Radiation ◽  
New Technologies ◽  
Barrier Properties ◽  
Dip Coating ◽  
Sem Analysis ◽  
Woven Fabrics ◽  
Protection Factor ◽  
Ultraviolet Protection Factor ◽  
Harmful Effects

One of the directions of development in the textiles industry is the search for new technologies for producing modern multifunctional products. New solutions are sought to obtain materials that will protect humans against the harmful effects of the environment, including such factors as the activity of microorganisms and UV radiation. Products made of natural cellulose fibers are often used. In the case of this type of material, it is very important to perform appropriate pretreatment before subsequent technological processes. This treatment has the aim of removing impurities from the surface of the fibers, which results in the improvement of sorption properties and adhesion, leading directly to the better penetration of dyes and chemical modifiers into the structure of the materials. In this work, linen fabrics were subjected to a new, innovative treatment being a combination of bio-pretreatment using laccase from Cerrena unicolor and modification with CuO-SiO2 hybrid oxide microparticles by a dip-coating method. To compare the effect of alkaline or enzymatic pretreatment on the microstructure of the linen woven fabrics, SEM analysis was performed. The new textile products obtained after this combined process exhibit very good antimicrobial activity against Candida albicans, significant antibacterial activity against the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus, as well as very good UV protection properties (ultraviolet protection factor (UPF) > 40). These innovative materials can be used especially for clothing or outdoor textiles for which resistance to microorganisms is required, as well as to protect people who are exposed to long-term, harmful effects of UV radiation.

Characterization of the effect of fabric structure on the optical properties of woven fabrics

2019 ◽  
Vol 23 (1) ◽  
pp. 58-70
Author(s):  
Paniz Khosravani ◽  
Nazanin Ezazshahabi ◽  
Masoud Latifi
Keyword(s):  
Optical Properties ◽  
Structural Parameters ◽  
Human Perception ◽  
Comparative Judgment ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Content Type ◽  
Weave Structure ◽  
The Aesthetic ◽  
Fabric Surface

Purpose This paper aims to study the optical properties of woven fabrics. Design/methodology/approach The current study was carried out to objectively evaluate the luster of a group of woven fabrics with different weave structures and weft densities, with the aid of a goniophotometer. The results obtained from the objective luster measurement were validated by a set of pair comparison subjective tests using Thurstone’s law of comparative judgment. Findings The proper correlation with the R2 value of more than 0.96, between subjective and objective tests, confirmed the reliability and accordance of objective results with the human perception of luster. Statistical analysis of the luster results clarified that the effect of fabric structural parameters such as weave structure and weft density are significant at the confidence range of 95 per cent. The highest luster index was achieved for the twill 3/1 weave structure and the lowest luster belonged to the plain pattern. In addition, an increase in the density of the fabric leads to better luster. Moreover, it was concluded that the surface roughness affects the luster. A rise in the roughness value of the woven fabric causes reduction in its luster property. Originality/value Optical properties of woven fabrics, which are mainly attributed through the measurement of luster, are important for qualifying the aesthetic characteristics of the fabrics with various weave structures. Bearing in mind the influence of fabric surface properties on the aesthetic features of cloths, obtaining information in this field is a guide for selecting the suitable fabric for various end uses.

scholarly journals Ultraviolet Protection by Fabric Engineering

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mukesh Kumar Singh ◽  
Annika Singh
Keyword(s):  
Areal Density ◽  
Woven Fabrics ◽  
Uv Protection ◽  
Comfort Level ◽  
Protection Factor ◽  
Ultraviolet Protection Factor ◽  
Wear Comfort ◽  
Ultraviolet Protection ◽  
Multifilament Yarns ◽  
Fabric Structures

Background. The increasing emission of greenhouse gases has evoked the human being to save the ozone layer and minimize the risk of ultraviolet radiation (UVR). Various fabric structures have been explored to achieve desired ultraviolet protection factor (UPF) in various situations. Objective. In this study, the effect of various filament configurations like twisted, flat, intermingled, and textured in multifilament yarns on fabric in different combinations is assessed in order to engineer a fabric of better ultraviolet protection factor (UPF). Methods. In order to engineer a fabric having optimum UV protection with sufficient comfort level in multifilament woven fabrics, four different yarn configurations, intermingled, textured, twisted, and flat, were used to develop twelve different fabric samples. The most UV absorbing and most demanding fibre polyethylene terephthalate (PET) was considered in different filament configuration. Results. The combinations of intermingled warp with flat, intermingled, and textured weft provided excellent UVR protection comparatively at about 22.5 mg/cm2 fabric areal density. The presence of twisted yarn reduced the UV protection due to enhanced openness in fabric structure. Conclusion. The appropriate combination of warp and weft threads of different configuration should be selected judiciously in order to extract maximum UV protection and wear comfort attributes in multifilament woven PET fabrics.

Modeling the Effects of Color on the UV Protection Provided by Cotton Woven Fabrics Dyed with Azo Dyestuffs

2009 ◽  
Vol 48 (22) ◽  
pp. 9817-9822 ◽  
Author(s):  
Ascensión Riva ◽  
Inés Algaba ◽  
Montserrat Pepió ◽  
Remedios Prieto
Keyword(s):  
Woven Fabrics ◽  
Uv Protection

Multi-objective optimization of parametric combination of injected slub yarn for producing knitted and woven fabrics with least abrasive damage

2017 ◽  
Vol 21 (2) ◽  
pp. 111-133 ◽  
Author(s):  
Arunangshu Mukhopadhyay ◽  
Vinay Kumar Midha ◽  
Nemai Chandra Ray
Keyword(s):  
Structural Parameters ◽  
Research Work ◽  
Optimal Solution ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Content Type ◽  
Multi Objective ◽  
Score Analysis ◽  
The Impact ◽  
Slub Yarn

Purpose This study aims to optimize the parametric combination of injected slub yarn to achieve least abrasive damage on fabrics produced from it. Design/methodology/approach Single base injected slub yarn structural parameters, vis-à-vis slub length, slub thickness and slub frequency, were varied during preparation of yarn samples under this research work. A total of 17 yarn samples were produced according to the Box and Bhenken design of the experiment. Subsequently knitted and woven (using injected slub yarns in the weft only) fabric samples were prepared from these yarns. Yarn and fabric samples were abraded with standard instruments to see the impact of yarn structural parameters on abrasive damage of fabric in terms of fabric mass loss and appearance deterioration. From the test results, empirical models relating to slub parameters and fabric abrasion behavior were developed through a backward elimination regression approach. Subsequently, a set of optimal parametric combinations was derived with multi-objective evolutionary algorithms by using MATLAB software. This was followed by ranking all optimal solutions through technique for order preference by similarity to idle solution (TOPSIS) score analysis. Findings The injected slub yarn’s structural parameters have a strong influence on the abrasive damage of knitted and woven fabric. It is seen that the best suitable parametric combination of slub parameters for achieving the least abrasive damage is not the same for knitted and woven fabric. Practical implications The spinner can explore this concept to find out the best suitable parametric combination during pattern making of injected slub yarn through MATLAB solution followed by TOPSIS score analysis based on their priority of criteria level to ensure better abrasion behavior of fabric produced. Originality/value Optimization of parametric combination of injected slub yarns will help to ensure production of fabric with most resistance to abrasion for specific applications. The studies showed that the optimal solution for woven and knitted fabrics is different. The result indicates that in the case of knitted fabric, comparatively lesser slub thickness is found to be suitable for getting better fabric abrasion resistance, whereas in the case of woven fabric, comparatively higher slub thickness is found suitable for the same.

Correlation Analysis Based on the Performance and Structural Parameters of Woven Fabrics for Bedding

2013 ◽  
Vol 796 ◽  
pp. 240-244
Author(s):  
Xun Ke Sun ◽  
Tao Qiu ◽  
Mei Jun Chen ◽  
Cen Feng
Keyword(s):  
Correlation Analysis ◽  
Correlation Coefficient ◽  
Performance Indicators ◽  
Partial Correlation ◽  
Structural Parameters ◽  
Scientific Evidence ◽  
Woven Fabrics ◽  
Main Factors ◽  
Spss Software ◽  
Partial Correlation Coefficient

Typical woven fabrics for bedding were selected from the market in this paper. Based on test and analysis results of the structural parameters, the relevant performance indicators were measured in consideration of mechanical properties,comfort and style of fabrics, and the test data were systematically integrated and the relevant quantitative data were ultimately obtained. Meanwhile, Fabric Assurance Tester was used to determine the style of the fabrics and tested indicators were chosen, following with normalized statistics and processing. In addition, SPSS software was applied for the correlation analysis between fabric properties and structural parameters through the correlation and partial correlation analysis.According to the results of correlation coefficient,partial correlation coefficient, the paper revealed the intrinsic link between the fabric’s structural parameters and its properties. As to the main factors of the structural parameters which greatly affect the performance of the fabrics, they will provide scientific evidence for the design and development of fabric.

Synthesis of MnO2 nanoparticles and their effective utilization as UV protectors for outdoor high voltage polymeric insulators used in power transmission lines

2016 ◽  
Vol 18 (48) ◽  
pp. 32876-32890 ◽  
Author(s):  
Dipankar Ghosh ◽  
Subhendu Bhandari ◽  
Dipak Khastgir
Keyword(s):  
Uv Radiation ◽  
High Voltage ◽  
Transmission Lines ◽  
Power Transmission ◽  
Uv Protection ◽  
Power Transmission Lines ◽  
Effective Utilization ◽  
Mno2 Nanoparticles ◽  
Polymeric Insulators ◽  
Outdoor Insulators

The mechanism of the UV protection of polymers by MnO2 where UV radiation is absorbed by MnO2 particles present in the PDMS/EVA–MnO2 composite used in high voltage outdoor insulators for power transmission lines.

Sign in / Sign up

Export Citation Format

Share Document