scholarly journals Sources of PM10 Air Pollution in Rural Area in the Vicinity of a Highway In Žilina Selfgoverning Region, Slovakia

2015 ◽  
Vol 11 (1) ◽  
pp. 58-68 ◽  
Author(s):  
Dušan Jandačka

Abstract Particulate matter results as an aftermath of numerous distinctive processes in the atmosphere and they become a part of everyday life. Their harmful effect and impact on the ambient environment is determined predominantly by the presence of various chemical substances and elements. The chemical composition of these particles (organic and elemental carbon, mineral dust, sea aerosols, secondary particles, especially sulphates and nitrates, heavy metals and further elements) is mainly impacted on by their origin, whereas the primary source of the particulate matter is determined and specified by the profile of chemical elements and substances. Particulate Matter (PM) may originate in various natural resources or anthropogenic sources. Among the natural sources sea salt is to be counted on, dust of the earth crust, pollen and volcanic ashes. Anthropogenic sources do include, predominantly, burning fossil fuels in the fossil-fuel power plants, local heating of households, burning liquefied fossil fuels in the combustion engines of vehicles, noncombustion related emissions as a result of vehicular traffic, resuspension of the road-traffic-related dust.

2015 ◽  
Vol 244 ◽  
pp. 171-181 ◽  
Author(s):  
Daniela Ďurčanská ◽  
Dušan Jandačka

Particulate matter (PM) is one of the striking pollutants and causes appreciable degradation of the environment and therefore the quality of life of the population. PM may originate in various natural resources or anthropogenic sources. Among the natural sources sea salt is to be counted on, dust of the earth crust, pollen and volcanic ashes. Anthropogenic sources do include, predominantly, burning fossil fuels in the fossil-fuel power plants, local heating of households, burning liquefied fossil fuels in the combustion engines of vehicles, non-combustion related emissions as a result of vehicular traffic, resuspension of the road-traffic-related dust. Their harmful effect and impact on the ambient environment is determined predominantly by the aerodynamic diameter of PM and by the presence of various chemical substances and elements. The subject of this presentation is monitoring particulate matter along the cycle of its creation in the vicinity of highway in rural area and an evaluation of fraction ratios PM10, PM2.5 and PM1 with regard to meteorological conditions and traffic volume. Wind speed and temperature appear to be the most significant meteorological factors with proven impact on particulate matter in ambient air. The fine fraction PM2.5 is determining for the total measured fraction PM10. It has also been monitored the chemical composition of PM, in particular the presence of metals in fractions of PM. Some chemical elements (metals) are characteristic for fine fraction PM2.5 and some for coarse fraction PM2.5-10. It depends primarily on measuring seasons, the distribution of potential sources of particulate matter and metals in the time and space.


2012 ◽  
Vol 326-328 ◽  
pp. 330-334 ◽  
Author(s):  
Jan Valíček ◽  
Jana Müllerová ◽  
Vlastimil Kuběna ◽  
Pavel Koštial ◽  
Marta Harničárová ◽  
...  

Pollutants can be classified according to their chemical composition, harmfulness, hazardousness, risk rate and toxicity. The most monitored pollutants are particulate matter (PM), carbon monoxide (CO), nitrogen oxide (NOx), sulfur dioxide (SO2), organic substances which are in the form of gaseous phase in waste gases expressed as total organic carbon, dibenzodioxins and dibenzofurans [1-3]. Other pollutants are divided into several groups and subgroups, such as substances with carcinogenic effects (asbestos, Co, Cd, Be, Ni, As, Cr, dioxins, etc.), solid inorganic contaminants (He, Se, animony, and others) and inorganic pollutants in the form of gases (HCl, HF, ammonia, etc.), organic gases and vapours (phenol, toluene, acetone and many others) and gases causing the greenhouse effect (CO2, methane, N2O, hydrofluorocarbons, etc.). The term particulate matter, or suspended matter refers to the emissions of a wide range of wind drift solids and liquid particles of material in size from several nanometres up to 0.5 mm, which stay in the air for some time. This is a major component of atmospheric pollution, which contributes to harmful effects not only on human health but also on intensity of materials degradation. Into the atmosphere, where we can meet them, regardless of particle size and chemical composition, in the form of a complex heterogeneous mixture, they are released from burning fossil fuels and also from burning biomass-based fuels, while domestic heating accounts for about 16% of the total production of particulate matter [4,5,6]. This percentage represents a degree of imperfect combustion of fuels used in local heating. Emissions from incomplete combustion are undesirable from the point of view of human health as well as from the economic point of view, because this leads to the degradation of materials. Nevertheless, since fuel combustion is necessary for the society, emissions are still produced. This paper presents an automated method of perfect combustion control in local heating in order to minimize emissions being produced.


2020 ◽  
Vol 20 (1) ◽  
pp. 409-429 ◽  
Author(s):  
Marco Pandolfi ◽  
Dennis Mooibroek ◽  
Philip Hopke ◽  
Dominik van Pinxteren ◽  
Xavier Querol ◽  
...  

Abstract. Here we report results of a detailed analysis of the urban and non-urban contributions to particulate matter (PM) concentrations and source contributions in five European cities, namely Schiedam (the Netherlands, NL), Lens (France, FR), Leipzig (Germany, DE), Zurich (Switzerland, CH) and Barcelona (Spain, ES). PM chemically speciated data from 12 European paired monitoring sites (one traffic, five urban, five regional and one continental background) were analysed by positive matrix factorisation (PMF) and Lenschow's approach to assign measured PM and source contributions to the different spatial levels. Five common sources were obtained at the 12 sites: sulfate-rich (SSA) and nitrate-rich (NSA) aerosols, road traffic (RT), mineral matter (MM), and aged sea salt (SS). These sources explained from 55 % to 88 % of PM mass at urban low-traffic-impact sites (UB) depending on the country. Three additional common sources were identified at a subset of sites/countries, namely biomass burning (BB) (FR, CH and DE), explaining an additional 9 %–13 % of PM mass, and residual oil combustion (V–Ni) and primary industrial (IND) (NL and ES), together explaining an additional 11 %–15 % of PM mass. In all countries, the majority of PM measured at UB sites was of a regional+continental (R+C) nature (64 %–74 %). The R+C PM increments due to anthropogenic emissions in DE, NL, CH, ES and FR represented around 66 %, 62 %, 52 %, 32 % and 23 %, respectively, of UB PM mass. Overall, the R+C PM increments due to natural and anthropogenic sources showed opposite seasonal profiles with the former increasing in summer and the latter increasing in winter, even if exceptions were observed. In ES, the anthropogenic R+C PM increment was higher in summer due to high contributions from regional SSA and V–Ni sources, both being mostly related to maritime shipping emissions at the Spanish sites. Conversely, in the other countries, higher anthropogenic R+C PM increments in winter were mostly due to high contributions from NSA and BB regional sources during the cold season. On annual average, the sources showing higher R+C increments were SSA (77 %–91 % of SSA source contribution at the urban level), NSA (51 %–94 %), MM (58 %–80 %), BB (42 %–78 %) and IND (91 % in NL). Other sources showing high R+C increments were photochemistry and coal combustion (97 %–99 %; identified only in DE). The highest regional SSA increment was observed in ES, especially in summer, and was related to ship emissions, enhanced photochemistry and peculiar meteorological patterns of the Western Mediterranean. The highest R+C and urban NSA increments were observed in NL and associated with high availability of precursors such as NOx and NH3. Conversely, on average, the sources showing higher local increments were RT (62 %–90 % at all sites) and V–Ni (65 %–80 % in ES and NL). The relationship between SSA and V–Ni indicated that the contribution of ship emissions to the local sulfate concentrations in NL has strongly decreased since 2007 thanks to the shift from high-sulfur- to low-sulfur-content fuel used by ships. An improvement of air quality in the five cities included here could be achieved by further reducing local (urban) emissions of PM, NOx and NH3 (from both traffic and non-traffic sources) but also SO2 and PM (from maritime ships and ports) and giving high relevance to non-urban contributions by further reducing emissions of SO2 (maritime shipping) and NH3 (agriculture) and those from industry, regional BB sources and coal combustion.


Atmosphere ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 583 ◽  
Author(s):  
Dusan Jandacka ◽  
Daniela Durcanska

Urban air quality is continuing to deteriorate. If we want to do something about this problem, we need to know the cause of the pollution. The big problem, not only in Europe, is the high concentrations of particulate matter (PM) in the urban environment. The origin of these particles can be different, including combustion, transport, industry, natural resources, etc. Particulate matter includes a large amount of the finest PM fractions, which can remain in the air for a long time, easily enter respiratory tracks, and damage human health. Particulate matter is also produced by the abrasion of different parts of roads and vehicle fleets and from resuspension road dust, which concerns matter with larger aerodynamic diameters. For this reason, we carried out a series of measurements at various measuring stations in Žilina, Slovakia, during different measuring seasons. The main objective was to find out the diversity of particulate matter sources in Žilina. The search for the particulate matter origin was carried out by particulate matter measurements, determination of the particulate matter fraction concentrations (PM10, PM2.5, and PM1), an investigation on the effect of secondary factors on the particulate matter concentrations, chemical analyses, and multivariate statistical analyses. Varied behavior of the particulate matter with respect to the measurement station and the measurement season was found. Differences in the concentrations of investigated chemical elements contained in the PM were found. Significant changes in the concentrations of particulate matter are caused not only by primary sources (e.g., road traffic in the city of Žilina), but mainly by the negative events (combination of air pollution sources and meteorological conditions). Maximum concentrations of particulate matter PM10 were measured during the winter season at the measuring station on Komenského Street: PM10 126.2 µg/m3, PM2.5 97.7 µg/m3, and PM1 90.4 µg/m3 were obtained using the gravimetric method. The coarse fraction PM2.5-10 was mainly represented by the chemical elements Mg, Al, Si, Ca, Cr, Fe, and Ba, and the fine fraction PM2.5 was represented by the chemical elements K, S, Cd, Pb, Ni, and Zn. Road transport as a dominant source of PM10 was identified from all measurements in the city of Žilina by using the multivariate statistical methods of principal component analysis (PCA) and factor analysis (FA).


Author(s):  
Rodrigo Ferreira ◽  
Camila Nunes ◽  
Murilo Souza ◽  
Maria Canela

Polycyclic aromatic hydrocarbons (PAH) are products of incomplete combustion of biomass and fossil fuels, that are produced on a larger scale by anthropogenic sources. Burning sugarcane plantations can be a source of atmospheric PAH in regions where this culture predominates. Campos dos Goytacazes, Brazil, is surrounded by sugarcane crops that still use fire as a facilitating method for the harvesting process. This study aims to evaluate the presence of outdoor and indoor PAH in 10 µm particulate matter (PM10) at one university in Campos dos Goytacazes. PM10 samples were collected from January to November 2018. Samples were extracted using an ultrasonic probe and analyzed by gas chromatography coupled to mass spectrometry (GC-MS). The ideal extraction conditions (3 min; 150 W; 50 mL) were defined by 23 full factorial design. The analysis showed a significant PM10 level increase (23.19 to 34.50 µg m-3 in outdoor, and 15.15 to 31.66 µg m-3 in indoor samples) and higher total PAH concentration in the harvesting season (outdoor: 0.73 ng m-3; indoor 0.52 ng m-3) than in non-harvesting season (outdoor: 0.49 ng m-3; indoor: 0.28 ng m-3), however, average PAH values found in outdoor samples in harvesting season did not show significant difference from non-harvesting season.


Author(s):  
Parakram Pyakurel ◽  
Filipe Quintal ◽  
James Auger ◽  
Julian Hanna

One method of reducing atmospheric CO2 emissions in the transportation sector is the replacement of conventional fossil fuel-based vehicles with Electric Vehicles (EVs). However, fossil fuels are still the primary source of electricity production in many regions and the utilization of EVs in such regions increases the electricity demand because of battery charging. This results in increased burning of fossil fuels by thermal power plants and therefore can offset savings in CO2 emissions resulting from the adoption of EVs. In this paper, we consider a scenario where all fossil fuel-based conventional vehicles are replaced by EVs and then estimate the net CO2 emission savings resulting from the adoption of EVs in a region where electricity is primarily supplied by thermal plants. Only emissions generated during the operational phase of vehicle use are considered; emissions during the production phase are not considered. The region under consideration is Madeira, Portugal where thermal plants account for 80% of the total electricity produced. Our findings suggest that although EVs have huge potential to save CO2 emissions, a substantial amount of the savings can be offset due to the increased burning of fossil fuels by thermal plants to meet the electrical demand of charging batteries.


Forests ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 46
Author(s):  
Na-Ra Jeong ◽  
Seung-Won Han ◽  
Jeong-Hee Kim

As a green infrastructure component, urban street vegetation is increasingly being utilized to mitigate air pollution, control microclimates, and provide aesthetic and ecological benefits. This study investigated the effect of vegetation configurations on particulate matter (PM) flows for pedestrians in road traffic environments via a computation fluid dynamics analysis based on the road width (four and eight-lane) and vegetation configuration (single-, multi-layer planting, and vegetation barrier). Airflow changes due to vegetation influenced PM inflow into the sidewalk. Vegetation between roadways and sidewalks were effective at reducing PM concentrations. Compared to single-layer planting (trees only), planting structures capable of separating sidewalk and roadway airflows, such as a multi-layer planting vegetation barrier (trees and shrubs), were more effective at minimizing PM on the sidewalk; for wider roads, a multi-layer structure was the most effective. Furthermore, along a four-lane road, the appropriate vegetation volume and width for reducing PM based on the breathing height (1.5 m) were 0.6 m3 and 0.4 m, respectively. The appropriate vegetation volume and width around eight-lane roads, were 1.2–1.4 m3 and 0.8–0.93 m, respectively. The results of this study can provide appropriate standards for street vegetation design to reduce PM concentrations along sidewalks.


Author(s):  
Filippo G. Praticò ◽  
Paolo G. Briante

Air pollution is an important issue worldwide. Solid components in air (particulate matter, PM) originate from a variety of natural or anthropogenic sources and have different morphological, physical, and chemical properties. Their presence in the air also depends on meteorological conditions, such as humidity, rainfall, and wind speed. PM pollution has adverse effects on environment and human health. Therefore, it is very important to address sources and processes involved in PM generation. Among the existing sources, a special attention must be paid to PM emissions from road traffic, i.e., exhaust sources (e.g., fuel combustion) and non-exhaust sources (e.g., road, tyre, brakes). These traffic-related sources contribute to PM concentrations in cities, and this calls for research into new possible systems and/or mitigation measures. In light of the facts above, the objectives of this study are 1) To evaluate the contribution to PM emission from traffic-related sources. 2) To evaluate existing mitigation measures and to identify new ones to reduce PM production. First results show that: 1) Non-exhaust sources have a different role in PM generation and they differently affect PM10, PM2.5, and PM0.1. 2) Even if emissions-related regulations have led to reductions in exhaust emissions from road traffic, other mitigation measures could reduce the non-exhaust part of emissions (e.g., brakes wear, road wear, and tyre wear). 3) New technologies could be developed to reduce PM from non-exhaust sources.


2015 ◽  
Vol 26 (3) ◽  
pp. 12-16
Author(s):  
Hanna Jaworska ◽  
Halina Dąbkowska-Naskręt ◽  
Szymon Różański

Abstract The primary source of soils and plants contamination with heavy metals is rapidly growing traffic. One of the places exposed to harmful effect of vehicle exhaust is Leśny Park Kultury and Wypoczynku in Myślęcinek (LPKiW) near Bydgoszcz. Along LPKiW goes a communication road, which may be the source of environment contamination with heavy metals. The main threat for arable areas and forests is lead (Pb), originating from tetraethyl lead, used until recently as an additive in gasoline. The aim of the conducted research was to determine the influence of traffic on the content of lead in soils and pine trees bark on the area of LPKiW located in the close vicinity of a busy traffic route. The research material was collected along the outlet route to A1 highway in the distance of 50 - 75 m from the edge of the road, from 13 representative research points. The content of lead in the research material was determined using ASA method after the mineralization of samples with microwave technique. In surface horizons of the investigated soils the total contents of Pb ranged from 11.71 to 40.58 mg·kg-1, and in subsurface horizons ranged from 8.61 to 9.41 mg·kg-1. The characteristic feature of the investigated soils is the higher accumulation of Pb in surface horizons, which is associated with its absorption by organic matter and clay minerals. The obtained results and literature data as compared with Pb content in reference samples show the influence of vehicles emissions on the Pb content


Sign in / Sign up

Export Citation Format

Share Document