scholarly journals Changes in the Strength of the Polymer Concrete Used in the Electroplating Vats Under Operational Load

2017 ◽  
Vol 27 (4) ◽  
pp. 185-193
Author(s):  
Lidia Radna ◽  
Volodymyr Sakharov
Keyword(s):  
Strength Test ◽  
Polymer Concrete ◽  
Sustained Load ◽  
Copper Industry ◽  
Concrete Material ◽  
Operational Conditions ◽  
Tensile Strength Test ◽  
Operational Load ◽  
Strength Tests ◽  
Increased Strength

Abstract Due to the strong and aggressive electrolyte media and thermal load, design of the electroplating vats in the copper industry often relies on the resin concrete. The article presents the results of the strength tests of the polymer concrete based on the "Derakane" resin, used in the construction of electroplating vats. Samples were taken from the real vats - both new and 17-year old. Strength tests included compression and bending tensile strength test. To assess the effect of operational conditions the tests were performed on the same-age vats, some of which were never used while others were subjected to the operational load. During the operation, the vats sustained load of the anode and cathode weights, cyclic electrolyte loading with a temperatures up to 60°C. As a result, it was noted that the operational conditions led to the increased strength of the polymer concrete material.

scholarly journals EARLY STRENGTH TESTING AFTER ACL RECONSTRUCTION IMPACTS ISOKINETIC STRENGTH PERFORMANCE AT TIME OF RETURN TO SPORT

2021 ◽  
Vol 9 (7_suppl3) ◽  
pp. 2325967121S0011
Author(s):  
Adam Weaver ◽  
Dylan Roman ◽  
Maua Mosha ◽  
Nicholas Giampetruzzi
Keyword(s):  
Test Performance ◽  
Knee Extension ◽  
Strength Test ◽  
Strength Testing ◽  
Isokinetic Strength ◽  
Rehabilitation Process ◽  
Strength Performance ◽  
Knee Extension Strength ◽  
Isometric Knee Extension ◽  
Strength Tests

Background: The standard of care in ACL reconstruction (ACLR) typically involves standardized strength testing at 6 months or later to assess a patient’s readiness to return to play (RTP) using isokinetic and isometric testing, and functional strength testing. Recent literature suggests that isokinetic knee extension strength should demonstrate 89% limb symmetry index (LSI) or greater prior to returning to sport. However, there is little known on the effects of strength testing early in the rehabilitation process and the relationship to strength test performance at time of RTP. Purpose: The purpose of this study was to examine how early post-operative strength test performance impacts isokinetic strength outcomes at RTP testing in adolescents. Methods: The retrospective cohort study included patients undergoing primary ACLR between 12 and 18 years of age, early post-operative strength measures, and isokinetic dynamometer strength at RTP from July 2017 and April 2019. Data was dichotomized into desired outcomes at 3 months: >70% isometric knee extension LSI, > 20 repetitions on anterior stepdown test (AST), > 90% LSI Y Balance. At RTP testing, isokinetic knee extension strength data was categorized into >89% LSI at 3 speeds (300, 180, 60°/sec). Chi square testing and odds ratio statistics were used to examine association and its magnitude. Results: 63 patients met inclusion criteria (38 females; 15.37±1.66 years old). >70% LSI isometric knee extension strength at 3 months showed a significant association (Table 2) and demonstrated the strongest odds of having >89% LSI on isokinetic strength tests at all 3 speeds at RTP with 180°/sec being the highest (OR=14.5; 95% CI=4.25,49.43; p= <0.001). Performance on AST showed a significant association (χ2 (1, n=63) = 17.00, p <0.001), and highest odds at 180°/sec (OR=4.61; 95% CI = 1.59, 13.39, p=<0.001) and 60°/sec (OR= 3.07; 95% CI = 1.10, 8.63, p= 0.04). Combination of performance on isometric strength tests and AST showed a significant association to isokinetic strength at all three speeds, but less predictive then isometrics in isolation. (Table 2). There was no significant relationship between YBR LSI at 3 months and isokinetic strength at 6 months. Conclusion: Standardized strength testing early in rehabilitation can help identify patients that will successfully complete RTP testing. Our results suggest that isometric knee extension strength and timed anterior stepdown test provide meaningful clinical information early in the rehabilitation process. This data also suggests that the use of YBAL for predicting isokinetic strength performance is limited. [Table: see text][Table: see text]

scholarly journals PENGARUH PENGGUNAAN LIMBAH PLASTIK POLYPROPYLENE (PP) SEBAGAI CAMPURAN AGREGAT KASAR TERHADAP KUAT TEKAN DAN TARIK PADA BETON FC’ 25 MPA

2019 ◽  
Vol 3 (2) ◽  
pp. 81-89
Author(s):  
Angga Pirman Firdaus ◽  
Jonbi
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Strength Test ◽  
Plastic Waste ◽  
Concrete Mixture ◽  
Strength Testing ◽  
Concrete Compressive Strength ◽  
Tensile Strength Test ◽  
Compressive Strength Test ◽  
Waste Mixture

Indonesia ranks second in the world's largest plastic waste producer after China. Each year, Indonesia can contributeup to 187.2 million tons of plastic waste, while China reaches 262.9 million tons of plastic waste. Based on the data, one way to utilize plastic waste by using plastic waste as a mixture of concrete, where the plastic used is polypropylene (PP) plastic with different percentage of concrete mixture, the test includes compressive strength test and tensile concrete. The results of concrete compressive strength testing with polypropylene (PP) plastic waste mixture of 5%, 10% and 15% at age 28 in aggregate aggregate mixture decreased by 5.15%, 6.89% and 13.53%. As for the result of concrete tensile strength test with polypropylene (PP) plastic waste mixture of 5%, 10% and 15% at age 28 in crude aggregate mixture decreased 17,61%, 24,13% dan 23,24%.

Assessment of post-heat behavior of cement mortar incorporating silica fume and granulated blast-furnace slag

2020 ◽  
Vol 11 (2) ◽  
pp. 221-246
Author(s):  
Ghasem Pachideh ◽  
Majid Gholhaki
Keyword(s):  
Tensile Strength ◽  
Flexural Strength ◽  
Blast Furnace Slag ◽  
Strength Test ◽  
Content Type ◽  
Granulated Blast Furnace Slag ◽  
Cement Mortars ◽  
Strength Tests ◽  
Pozzolanic Materials ◽  
Furnace Slag

Purpose With respect to the studies conducted so far and lack of researches on the post-heat behavior of cement mortars containing pozzolanic materials, the purpose of this paper is to investigate the post-heat mechanical characteristics (i.e. compressive, tensile and flexural strength) of cement mortars containing granulated blast-furnace slag (GBFS) and silica fume (SF). In doing so, selected temperatures include 25, 100, 250, 500, 700 and 9000c. Last, the X-ray diffraction test was conducted to study the microstructure of mixtures and subsequently, the results were presented as power-one mathematical relations. Design/methodology/approach Totally, 378 specimens were built to conduct flexural, compressive and tensile strength tests. Accordingly, these specimens include cubic and prismatic specimens with dimensions of 5 × 5 × 5 cm and 16 × 4 × 4 cm, respectively, to conduct compressive and flexural strength tests together with briquette specimen used for tensile strength test in which cement was replaced by 7, 14 and 21 per cent of SF and GBFS. To study the effect of temperature, the specimens were heated. In this respect, they were heated with a rate of 5°C/min and exposed to temperatures of 25 (ordinary temperature), 100, 250, 500, 700 and 900°C. Findings On the basis of the results, the most profound effect of using GBFS and SF, respectively, takes place in low (up to 250°C) and high (500°C and greater degrees) temperatures. Quantitatively, the compressive, tensile and flexural strengths were enhanced by 73 and 180 per cent, 45 and 100 per cent, 106 and 112 per cent, respectively, in low and high temperatures. In addition, as the temperature elevates, the particles of specimens containing SF and GBFS shrink less in size compared to the reference specimen. Originality/value The specimens were cured according to ASTMC192 after 28 days placement in the water basin. First, in compliance with what has been specified by the mix design, the mortar, including pozzolanic materials and superplasticizer, was prepared and then, the sampling procedure was conducted on cubic specimens with dimension of 5 × 5 × 5 mm for compressive strength test, prismatic specimens with dimensions of 16 × 4 × 4 mm for flexural strength test and last, briquette specimens were provided to conduct tensile strength tests (for each temperature and every test, three specimens were built).

scholarly journals An Innovative Test Method for Tensile Strength of Concrete by Applying the Strut-and-Tie Methodology

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2776 ◽  
Author(s):  
Wen-Cheng Liao ◽  
Po-Shao Chen ◽  
Chung-Wen Hung ◽  
Suyash Kishor Wagh
Keyword(s):  
Tensile Strength ◽  
Test Methods ◽  
Standard Test ◽  
Strength Test ◽  
Tension Test ◽  
Test Method ◽  
Direct Tension ◽  
Direct Tension Test ◽  
Strut And Tie ◽  
Tensile Strength Test

Tensile strength is one of the important mechanical properties of concrete, but it is difficult to measure accurately due to the brittle nature of concrete in tension. The three widely used test methods for measuring the tensile strength of concrete each have their shortcomings: the direct tension test equipment is not easy to set up, particularly for alignment, and there are no standard test specifications; the tensile strengths obtained from the test method of splitting tensile strength (American Society for Testing and Materials, ASTM C496) and that of flexural strength of concrete (ASTM C78) are significantly different from the actual tensile strength owing to mechanisms of methodologies and test setup. The objective of this research is to develop a new concrete tensile strength test method that is easy to conduct and the result is close to the direct tension strength. By applying the strut-and-tie concept and modifying the experimental design of the ASTM C78, a new concrete tensile strength test method is proposed. The test results show that the concrete tensile strength obtained by this proposed method is close to the value obtained from the direct tension test for concrete with compressive strengths from 25 to 55 MPa. It shows that this innovative test method, which is precise and easy to conduct, can be an effective alternative for tensile strength of concrete.

scholarly journals Influence of nicotine on healing of vesical sutures in rabbits

2007 ◽  
Vol 22 (6) ◽  
pp. 479-484 ◽  
Author(s):  
Christiano Machado ◽  
Eduardo Wei Kin Chin ◽  
Sérgio Ossamu Ioshii ◽  
Renato Tâmbara Filho ◽  
Aline Von Bathen
Keyword(s):  
Tensile Strength ◽  
Statistical Difference ◽  
Saline Solution ◽  
Healing Process ◽  
Bladder Wall ◽  
Inflammatory Cells ◽  
Strength Test ◽  
Control Group ◽  
Time Intervals ◽  
Tensile Strength Test

PURPOSE: To study the effects of nicotine on inflammatory cells, deposition of collagen and its interference on the strength of tissue in vesical sutures in rabbits. METHODS: Twenty New Zealand rabbits were used, randomized into two groups: group N, consisting of 10 animals, to which nicotine was administered in the dose of 2mg/kg of weight as a subcutaneous injection, diluted in 1ml of saline solution at 0.9% in a daily administration during the 28 days prior to the surgery; and group C, consisting of 10 animals, to which saline solution at 0.9% was administered in the same conditions and time intervals of the nicotine group. All the animals underwent cystotomy and suture of the bladder wall 28 days after the administration of nicotine or saline solution. The measurements were performed on the fourth and seventh day in each group after cystectomy and euthanasia of the animals. A fragment of bladder was removed and sent for a tensile strength test to evaluate the tissue strength and another fragment underwent a histological analysis of inflammatory process and deposition of collagen. RESULTS: There was a decrease of neutrophils on the fourth postoperative day (p=0.079) and an increase of plasmocytes on the seventh postoperative day (p=0.053) in the animals that were given nicotine, without statistical difference in relation to the control group. In the analysis of the proliferation of fibroblasts, deposition of collagen and tensile strength test, there was no statistical difference in relation to the control group. CONCLUSION: The administration of nicotine in rabbits did not influence the healing process of vesical suture in relation to the inflammatory cells, deposit of collagen and tissue strength of the suture.

Sign in / Sign up

Export Citation Format

Share Document