scholarly journals Nonisothermal Cold Crystallization Kinetics of Poly(lactic acid)/Bacterial Poly(hydroxyoctanoate) (PHO)/Talc

2019 ◽  
Vol 17 (1) ◽  
pp. 1266-1278
Author(s):  
Omaima Alhaddad ◽  
Safaa H. El-Taweel ◽  
Yasser Elbahloul
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Crystallization Kinetics ◽  
Crystallization Rate ◽  
Cold Crystallization ◽  
Poly Lactic Acid ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Kinetics Of ◽  
Thermal Stability Of

AbstractThe effects of bacterial poly(hydroxyoctanoate) (PHO) and talc on the nonisothermal cold crystallization behaviours of poly(lactic acid) (PLA) were analysed with differential scanning calorimetry (DSC), and the thermal stability of the samples was observed with thermal gravimetric analysis (TGA). The modified Avrami’s model was used to describe the nonisothermal cold crystallization kinetics of neat PLA and its blends. The activation energies E for nonisothermal cold crystallization were calculated by the isoconversional method of Kissinger-Akahira-Sunose (KAS). The DSC results showed that the PLA/PHO blends were immiscible in the whole studied range, and as the PHO and talc content increased, the crystallization rate of PLA accelerated, and the crystallinity of PLA in the PLA samples increased. The values of the Avrami exponent indicated that the nonisothermal cold crystallization of the neat PLA and its blends exhibited heterogeneous, three-dimensional spherulitic growth. The E values were strongly dependent on PHO and talc. The TGA results showed that the presence of PHO and talc slightly influenced the thermal stability of PLA.

scholarly journals Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

Nanomaterials ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 22 ◽  
Author(s):  
Agueda Sonseca ◽  
Salim Madani ◽  
Gema Rodríguez ◽  
Víctor Hevilla ◽  
Coro Echeverría ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Silver Nanoparticles ◽  
Lactic Acid ◽  
Food Packaging ◽  
Synthesis Method ◽  
Crystallization Rate ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
The Matrix ◽  
Degradation Properties

Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application.

scholarly journals Crystallization Kinetics of Poly(lactic acid)–Graphene Nanoscroll Nanocomposites: Role of Tubular, Planar, and Scrolled Carbon Nanoparticles

2021 ◽  
Vol 7 (4) ◽  
pp. 75
Author(s):  
Oluwakemi Ajala ◽  
Caroline Werther ◽  
Rauf Mahmudzade ◽  
Peyman Nikaeen ◽  
Dilip Depan
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Crystallization Kinetics ◽  
Crystallization Rate ◽  
Melting Behavior ◽  
Degree Of Crystallinity ◽  
Poly Lactic Acid ◽  
Avrami Model ◽  
Superior Mechanical Properties ◽  
Kinetics Of

Graphene nanoscrolls (GNS) are 1D carbon-based nanoparticles. In this study, they were investigated as a heterogeneous nucleating agent in the poly(lactic acid) (PLA) matrix. The isothermal and non-isothermal melting behavior and crystallization kinetics of PLA-GNS nanocomposites were investigated using a differential scanning calorimeter (DSC). Low GNS content not only accelerated the crystallization rate, but also the degree of crystallinity of PLA. The Avrami model was used to fit raw experimental data, and to evaluate the crystallization kinetics for both isothermal and non-isothermal runs through the nucleation and growth rate. Additionally, the effect of the dimensionality and structure of the nanoparticle on the crystallization behavior and kinetics of PLA is discussed. GNS, having a similar fundamental unit as CNT and GNP, were observed to possess superior mechanical properties when analyzed by the nanoindentation technique. The scrolled architecture of GNS facilitated a better interface and increased energy absorption with PLA compared to CNTs and GNPs, resulting in superior mechanical properties.

Crystallization Kinetics and Morphology of Poly(Lactic Acid)/Ethylene Acrylate Copolymer Blends

2017 ◽  
Vol 264 ◽  
pp. 25-28
Author(s):  
Mat Taib Razaina ◽  
Cho Yin Tham
Keyword(s):  
Lactic Acid ◽  
Crystallization Kinetics ◽  
Crystallization Rate ◽  
Avrami Equation ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Isothermal Crystallization Kinetics ◽  
Copolymer Blends ◽  
Acrylate Copolymer ◽  
Nucleus Surface

Isothermal crystallization kinetics and morphology of Poly (lactic acid) (PLA) and PLA/ethylene acrylate copolymer (EAC) blends were studied by differential scanning calorimetry (DSC) and polarized optical microscopy (POM) at various temperatures (95–125°C). The DSC data obtained was analyzed using the Avrami equation. The crystallization rate was found to depend on the crystallization temperature (Tc) and EAC content. At a given Tc, the crystallization rate value was greater in the blends than in PLA suggesting that the presence of EAC enhanced crystallization of PLA. Based on the DSC analysis the crystallization rate was maximum when PLA blend with 1 wt.% EAC was isothermally crystallized at 103°C. The presence of EAC did not significantly change in the spherulitic growth rate (G) of PLA. Analysis of the growth rates using the Lauritzen-Hoffman theory showed that a regime II to regime III transition was present for all PLA/EAC blends and that this transition occurred at temperature of 100°C. The fold surface energy values of PLA/EAC blends were lower than that of PLA indicating that PLA chains can readily fold onto the crystal nucleus surface after the incorporation of EAC.

Isothermal cold crystallization kinetics of borassus powder/poly(lactic acid) biocomposites

2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Yogesh Nana Marathe ◽  
Chellaswamy Ramesh ◽  
Manohar Virupax Badiger
Keyword(s):  
Lactic Acid ◽  
Crystallization Kinetics ◽  
Cold Crystallization ◽  
Poly Lactic Acid ◽  
Kinetics Of

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

The Mechanical Characteristics of Straw/poly(Lactic Acid) Composite Materials

2011 ◽  
Vol 335-336 ◽  
pp. 153-156
Author(s):  
Xue Li Wu ◽  
Jian Hui Qiu ◽  
Lin Lei ◽  
Yang Zhao ◽  
Eiichi Sakai
Keyword(s):  
Thermal Stability ◽  
Grain Size ◽  
Lactic Acid ◽  
Mechanical Characteristics ◽  
Fracture Strain ◽  
Filler Content ◽  
Agricultural Wastes ◽  
Poly Lactic Acid ◽  
Effective Utilization ◽  
Thermal Stability Of

To consider the effective utilization of plastics and agricultural wastes, rice straw fibre was extracted from agricultural wastes, and then composited with polylactic acid(PLA). The thermal stability of straw/poly(lactic acid)(straw/PLA) composites decreased (Thermogravimetric Analysis, TGA). Tensile strength, fracture strain and sharply impact strength of straw/PLA were decreased with the increase of filler content and grain size of straw. Yong’s modulus were increased as the increasing of straw content.

Sign in / Sign up

Export Citation Format

Share Document