scholarly journals Utilization of dolerite waste powder for improving geotechnical parameters of compacted clay soil

2021 ◽  
Vol 13 (1) ◽  
pp. 1523-1535
Author(s):  
Syed Husnain Ali Shah ◽  
Mohammad Arif ◽  
Qasim ur Rehman ◽  
Fawaz Manzoor
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Void Ratio ◽  
Clay Soil ◽  
Atterberg Limits ◽  
Degree Of Saturation ◽  
Dry Density ◽  
Compacted Clay ◽  
Grain Sizes

Abstract This study explores how dolerite cutting waste could be utilized for improving the quality of compacted clay soils. Different proportions of dolerite waste powder with varying grain sizes were used as admixtures and their impact on clay soil properties investigated. Ten samples were prepared by mixing clay soil with different proportions of dolerite waste powder having grain sizes of 0.210, 0.297, and 0.420 mm. The resulting samples were subjected to Proctor compaction, and their maximum dry density and optimum moisture content were measured. Next, all the compacted samples were subjected to geotechnical testing, including the determination of Atterberg limits, California bearing ratio (CBR), unconfined compressive strength, and specific gravity (Gs). The values of compaction parameters, Atterberg limits, and Gs were utilized for finding the porosity, void ratio, saturation potential, liquidity index (LI), and consistency index (CI). The results demonstrate that the addition of dolerite powder produces a substantial improvement in the plasticity index, compaction parameters, CBR, unconfined compressive strength, Gs, porosity, void ratio, degree of saturation, LI, and CI. The foremost reason for this improvement is the presence of denser and less water-adoring minerals in the added dolerite relative to pristine clay soil. Furthermore, the observed positive impact on the soils’ geotechnical comportment is comparatively higher with coarser than finer dolerite because of the decrease in surface area that causes a reduction in the moisture content and porosity but an increase in the density of soil.

scholarly journals Strength Improvement of Weak Subgrade Soil Using Cement and Lime

2019 ◽  
Vol 4 (1) ◽  
Author(s):  
Anigilaje B Salahudeen ◽  
Ja’afar A Sadeeq
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Optimum Moisture Content ◽  
Atterberg Limits ◽  
California Bearing Ratio ◽  
Natural Soil ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Subgrade Soil

The study investigate the suitability of subgrade soil in Baure Local Government Area of Kastina State Nigeria for road construction. The strength properties of the  subgrade was improved using lime and cement. Several analysis including the particle size distribution, specific gravity, Atterberg limits, compaction characteristics, unconfined compressive strength and California bearing ratio tests were performed on natural and lime/cement treated soil samples in accordance with BS 1377 (1990) and BS 1924 (1990) respectively. Soil specimens were prepared by mixing the soil with lime and cement in steps of 0, 3, 6, and 9% by weight of dry soil in several percentage combinations. The Atterberg limits of the weak subgrade soils improved having a minimum plasticity index value of 5.70 % at 3%Lime/6%Cement contents. The maximum dry density (MDD) values obtained showed a significant improvement having a peak value of 1.66 kN/m3 at 9%Lime/9%Cement contents. Similarly, a minimum value of 18.50 % was observed for optimum moisture content at 9%Lime/9%Cement contents which is a desirable reduction from a value of 25.00 % for the natural soil. The unconfined compressive test value increased from 167.30 kN/m2 for the natural soil to 446.77 kN/m2 at 9%Lime/9%Cement contents 28 days curing period. Likewise, the soaked California bearing ratio values increased from 2.90 % for the natural soil to 83.90 % at 9%Lime/9%Cement contents. Generally, there were improvements in the engineering properties of the weak subgrade soil when treated with lime and cement. However, the peak UCS value of 446.77 kN/m2 fails to meet the recommended UCS value of 1710 KN/m2 specified by TRRL (1977) as a criterion for adequate stabilization using Ordinary Portland Cement.            Keywords: Weak subgrade soil, Lime, Cement, Atterberg limits, Maximum dry density, Optimum moisture content, Unconfined compressive strength, California bearing ratio

scholarly journals Effect of Lime and Fly ash on Load Bearing Capacity of Expansive Clay soil

2019 ◽  
Vol 8 (11) ◽  
pp. 554-563
Keyword(s):  
Fly Ash ◽  
Moisture Content ◽  
Bearing Capacity ◽  
Clay Soil ◽  
Expansive Soil ◽  
Atterberg Limits ◽  
Dry Density ◽  
Index Test ◽  
Expansive Clay ◽  
Compaction Test

Expansive soil is a problematic soil which found in wide part of the world that has a high degree of sensitivity, nature of expansion and shrink behavior during water adding and removing this caused insufficient bearing capacity, excessive differential settlement and instability on excavation and embankment forming those conditions accelerate damage of building structure, road highway and dam. Attempt to undertake construction in such type of soil result will be bearing capacity failure, settlement problem. One of the well-known application of Lime and fly ash were improve Atterberg limits, compaction characteristics, bearing capacity and prevention of swelling problem of expansive clay that is why the main reason to select lime and fly ash in this project, both are good binding material to increase the cohesion force and shear strength of soil and assured to established rigid pavements and foundations. The mixing proportion of lime, fly ash and combination of lime and fly ash are (0%, 2 %, 4 % ), (10%, 15% ,20% ), (2 %+10 %, 2 % +15 %, 2 % +20 %) and (4 %+10 %, 4 % + 15 % , 4 %+ 20 %) with expansive soil respectively and then explored how much it modify the characteristics of soil like maximum dry density moisture content, consistency limits, FSI, UCS and CBR value which compare to untreated soil. Lime and fly ash treated soil carried out various tests Such as Moisture content test, consistency limit, compaction test, Unconfined Compression swelling index test and California bearing ratio test then after justify weather the bearing capacity of soil is good or not . Classification of soil was determined by conducting plasticity index and swelling index tests. Effect of lime and fly ash on soil index properties were assessed by conducting Atterberg limits test, strength of soil were assessed by conducting compaction test, UCS tests and CBR test and swelling properties were checked by conducting swelling index test. Expansive clay soil were mixed with lime, fly ash and combination of lime - fly ash by replacement process of soil and then cured for 7, 14 and 28 days.

scholarly journals Stabilization of Marine Clay Soil Using Polyurethane

2018 ◽  
Vol 250 ◽  
pp. 01004 ◽  
Author(s):  
Samaila Saleh ◽  
Nur Zurairahetty Mohd Yunus ◽  
Kamarudin Ahmad ◽  
Nazri Ali
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Clay Soil ◽  
Organic Matter Content ◽  
Road Construction ◽  
Liquid Limit ◽  
Matter Content ◽  
Marine Clay ◽  
The Road

Many chemicals stabilisation techniques are being employed all over the world to improve the engineering and physical properties of the problematic soils and reduce the potential damages caused by them. Out of those chemical stabilisation technics, application of Polyurethane to improve the strength of marine clay was investigated in the laboratory. Characterization of the soil geotechnical properties was carried out by conducting laboratory test that includes natural moisture content, Atterberg limits, grains sizes analyses, specific gravity, moisture-density relationship, unconfined compressive strength (UCS), organic matter content and PH tests. Unconfined compressive strength test at optimum moisture content with varying the dose of the Polyurethane content was conducted to test the effectiveness of Polyurethane as a chemical stabiliser. The result of the preliminary tests of the sample shows that the soil has a liquid limit of 65%, plastic limit of 26% and plasticity index of 53%. The percentages of gravel, sand and fines in the marine clay sample were 0 %, 1.32 % and 98.68 % respectively %. The results of the UCS test also revealed that Polyurethane stabilisation improved the strength of marine clay by 230%. Thus, the improvement in strength of stabilised marine clay soil can significantly reduce the overall thickness of the pavement and total cost of the road construction in future.

scholarly journals Experimental Study on Unconfined Compressive Strength of Basalt Fiber Reinforced Clay Soil

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Lei Gao ◽  
Guohui Hu ◽  
Nan Xu ◽  
Junyi Fu ◽  
Chao Xiang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Clay Soil ◽  
Soil Column ◽  
Basalt Fiber ◽  
Dry Density ◽  
Fiber Reinforced ◽  
Maximum Dry Density ◽  
Sem Images ◽  
Reinforced Clay

In order to study the mechanism and effect of basalt fiber reinforced clay soil, a series of unconfined compressive strength tests conducted on clay soil reinforced with basalt fiber have been performed under the condition of optimum water content and maximum dry density. Both the content and length of basalt fiber are considered in this paper. When the effect of content is studied, the 12 mm long fibers are dispersed into clay soil at different contents of 0.05%, 0.1%, 0.15%, 0.20%, 0.25%, 0.30%, and 0.35%. When the effect of length is researched, different lengths of basalt fibers with 4 mm, 8 mm, 12 mm, and 15 mm are put into soil at the same content of 0.05%. Experimental results show that basalt fiber can effectively improve the UCS of clay soil. And the best content and length are 0.25% and 12 mm, respectively. The results also show that the basalt fiber reinforced clay soil has the “poststrong” characteristic. About the reinforcement mechanism, the fiber and soil column-net model is proposed in this paper. Based on this model and SEM images, the effect of fiber content and length is related to the change of fiber-soil column and formation of effective fiber-soil net.

Laboratory Investigation on the Strength Characteristics of Cement-Treated Base

2014 ◽  
Vol 507 ◽  
pp. 353-360 ◽  
Author(s):  
Amiruddin Ismail ◽  
Mojtaba Shojaei Baghini ◽  
Mohamed Rehan Karim ◽  
Foad Shokri ◽  
Ramez A. Al-Mansob ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Resilient Modulus ◽  
Tension Test ◽  
Engineering Properties ◽  
Dry Density ◽  
Flexure Strength ◽  
Indirect Tension ◽  
Indirect Tension Test

Cement-Treated Base (CTB) is a non-conventional method used in road bases materials to improve its engineering properties due to the hardening of cement when moisture is present and extends the period of curing times. This study investigates the effects of cement additive on properties of base layer using laboratory mechanistic evaluation of stabilized soil mixtures. Laboratory tests conducted were Unconfined Compressive Strength (UCS), Indirect Tension test for Resilient Modulus (ITRM) and Flexure Strength (FS) tests. The results revealed that by adding Portland cement, the mechanical properties of the mixture have improved where the UCS is found to be an important quality indicator. In addition, the variables that influenced these tests, which are cement content, curing time, moisture content, and dry density, play important role to determine the performance of CTB. This paper presents the finding of a correlation conducted to analyse the influences of these variables using regression and ANOVA to establish significant models with the aim of predicting the strength base on mixture parameters. Keywords: Cement-Treated Base, Unconfined Compressive Strength, Indirect Tension test for Resilient Modulus, Flexure Strength, Moisture Content, Dry Density, Regression Analysis.

A Study of Soil Stabilization by Hydrated Lime at Kampung Kedaik Asal, Rompin, Pahang, Malaysia

2014 ◽  
Vol 695 ◽  
pp. 738-741
Author(s):  
Azhani Zukri ◽  
Nadiatul Adilah Ahmad Abdul Ghani
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Soil Stabilization ◽  
Optimum Moisture Content ◽  
Natural State ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Lime Content ◽  
Curing Period

This study involves the clay sample which is taken from Kampung Kedaik Asal, Rompin site and evaluation of its properties in natural state and after stabilization. The main objectives of this paper is to estimate the optimum lime content (OLC) needed to stabilize the soil by using Eades-Grim pH Test, to determine the optimum moisture content (OMC) and maximum dry density (MDD) of the treated soil by Standard Proctor Test and also the strength value of the soil specimens with different percentages of lime content corresponding with different curing period by Unconfined Compressive Strength (UCS) Test. From this study, the optimum amount to stabilize the clay soil and minimum amount of lime required to stabilize the soil pH level to 12 is 5%. The results showed that addition of lime decreased the maximum dry density (MDD) and increased the optimum moisture content (OMC). Unconfined compressive test on 48 sets of samples has been carried out for 7, 14 and 28 days of curing with different lime contents such as 5%, 7% and 9%. The highest unconfined compressive strength (UCS) achieved is 321 kN/m2 for clay stabilized with 9% lime content cured at 28 days. From the test results, it was found that the longer the immersion of curing period with higher lime content, the greater the compressive strength of the specimen.

scholarly journals Black Cotton Soil Stabilization by Using Fly Ash - Kota Stone Slurry Mix

2021 ◽  
Vol 9 (11) ◽  
pp. 1699-1703
Author(s):  
Phoolwanti Nanda
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Soil Stabilization ◽  
Atterberg Limits ◽  
Black Cotton Soil ◽  
Strength Development ◽  
Dry Density ◽  
X Ray ◽  
Soil Stabilizer

Abstract: The usage of waste material for stabilizing black cotton soil has been a sustainable interest. Kota stone slurry is a waste from kota stone and fly ash is a waste from industries containing high amount of sodium and magnesium, was used as a soil stabilizer for blac cotton soil improvement in this study. This research investigated the effects of sizes and percentages of kota stone slurry mix and fly ash on the physical and strength properties, which included particle size distribution, Atterberg limits, compaction, and unconfined compressive strength (UCS) of blac cotton soil. Micro structural characterization, including the scanning electron microscopic, energy dispersive X-ray spectroscopy, and X-ray diffraction was conducted on both untreated and treated black cotton soil samples to examine the mechanism of strength development. The addition of kota stone slurry and fly ash reduced the water holding capacity, which then caused the reduction in soil plasticity (from 18 to 11%) and optimum water content (from 20 to 16%) along with the increase in peak dry density (from 1.66 to 1.74 Mg/m3). The strength of black cotton soil may increased from 50 to almost 220 kPa. The optimum kota stone slurry and fly ash contents, providing the highest UCS, were at 20 and 30% for 0.063 mm kota stone slurry and fly ash and 0.15 mm kota stone slurry and fly ash, respectively. The UCS improvement of treated marine clay is attributed to the formation of cementation compounds, mainly aluminum magnesium silicate hydrate (A–M–S–H). The outcome of this research will allow the use of RBT as a low-carbon soil stabilizer across civil engineering applications. Keywords: Stablization, Fly ash, kota stone slurry, Atterberg limits, Compaction, and unconfined compressive strength

scholarly journals Experimental Study of the Effects of Some Selected Geotechnical Indices on the Unconfined Compressive Strength of Lateritic Soil

2019 ◽  
Vol 2 (Issue 1) ◽  
Author(s):  
G.O Adunoye ◽  
O.C Onah ◽  
F.O Ajibade
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Specific Gravity ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Soil Samples ◽  
Atterberg Limits ◽  
Effective Size ◽  
Natural Moisture Content ◽  
Coefficient Of Uniformity

This study undertook an experimental study of the comparative effects of Atterberg limits, particles size and compaction parameters on the unconfined compressive strength of selected soils. This was with a view to ascertaining which of the combinations of the soil properties will produce a good prediction of the unconfined compressive strength. To achieve this aim, soil samples were obtained from selected locations within Ife Central Local Government Area, Osun State, Nigeria. The following tests were conducted on the soil samples, following standard procedures: natural moisture content determination, specific gravity, Atterberg limits, compaction and unconfined compressive strength. Using Regression tool, the results obtained from the laboratory tests were used to develop the relationships between each of the index properties and unconfined compressive strength. Results showed that the natural moisture content of soil samples ranges between 18.48 % and 25.03 %; specific gravity ranges between 2.35 and 2.69; liquid limit ranges between 39.95 % and 83.98 %; plastic limit ranges between 29.32 % and 51.18 %; and plasticity index is between 8.74 % and 33.56 %. The maximum dry density ranges between 15.30kN/m3 and 19.30kN/m3 with their optimum moisture contents ranging between 13.80 % and 35.50 % while unconfined compressive strength is between 36.00 kN/m2 and 97.14 kN/m2. The results of regression analysis showed that effective size and coefficient of uniformity have the greatest effect (R2 = 0.82) on unconfined compressive strength of the tested soil samples. Therefore, the study concluded that effective size and coefficient of uniformity could be used to estimate the unconfined compressive strength of the soils.

Evaluating the Use of Ponded Fly Ash in a Roadway Base Course

1989 ◽  
Vol 178 ◽  
Author(s):  
David Q. Hunsucker ◽  
R. Clark Graves
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Moisture Content ◽  
Field Trial ◽  
Unconfined Compressive Strength ◽  
Hydrated Lime ◽  
Laboratory Evaluation ◽  
Dry Density ◽  
Base Course ◽  
Aggregate Base

AbstractThis paper summarizes findings of laboratory and field trial evaluations of ponded fly ash used as a component in a stabilized aggregate base course. Ponded fly ash is the fine portion of pond ash which is a by-product of a coal burning process and is disposed by sluicing to a disposal pond.Three stabilized aggregate base mixtures containing various proportions of dense graded aggregate, ponded fly ash, and hydrated lime were evaluated in the laboratory relative to maximum dry density, optimum moisture content, unconfined compressive strength, and static chord modulus of elasticity. The mixture that was selected for field trial evaluation had the highest unconfined compressive strength and consisted of 84% dense graded aggregate, 11% ponded fly ash, and 5% hydrated lime.A 750 foot section of a 22 foot wide roadway was constructed in May 1988. Approximately 88 tons of ponded fly ash were utilized in constructing the experimental base. Prior to construction, in-place California Bearing Ratio tests, moisture content determinations and Road Rater deflection tests were performed on the prepared subgrade. The stabilized aggregate base was placed in one 8 inch lift. During construction, relative compaction and moisture content of the base material were monitored by means of nuclear devices. Post construction evaluations included Road Rater deflection tests and coring to obtain samples for laboratory evaluation.To date, the section containing the stabilized aggregate base is performing very well in comparison to the conventionally paved section.

scholarly journals Geotechnical investigation of road pavement failure along arigidi / oke - agbe akoko, southwestern, Nigeria

2020 ◽  
Vol 8 (2) ◽  
pp. 35
Author(s):  
Thompson Henry Tolulope Ogunribido ◽  
Tunde Ezekiel Fadairo
Keyword(s):  
Compressive Strength ◽  
Specific Gravity ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Soil Samples ◽  
California Bearing Ratio ◽  
Dry Density ◽  
Geological Condition ◽  
Road Pavement ◽  
Natural Moisture Content

Twenty soil samples collected from the failed portions in the study area were air dried for two weeks before analyses. Each soil samples were subjected to eight engineering tests which include: natural moisture content, atterberg limit, specific gravity, compaction, unconfined compressive strength, California bearing ratio, grain size and hydrometer analysis. Results showed that the natural moisture content ranged from 17.7% to 37.8%, liquid limit from 48.5% to 62.4%, plastic limit from 18.3% to 26.8%, plasticity index from 25.7% to 37.7%, shrinkage limit from 5.8%-12.5%, optimum moisture content from 14.2% to 32.4%, maximum dry density from 1301 Kg/rn3 to 2002 Kg/rn3. Soaked California bearing ratio ranged from 5% to 17%, unsoaked from 15% to 38%, specific gravity from 2.5 to 2.68, unconfined compressive strength r from 112.8 Kpa to 259.7 Kpa, shear strength from 56.4 Kpa to 129.9 Kpa and hydrometer analysis from 48.5% to 72.1%. Based on the Federal Government specifications for pavement construction, for the soil to be suitable, stabilization with bitumen, Portland cement, lime, coal fly ash, and saw dust should be done. Road pavement failure along Arigidi – Oke Agbe road was due to poor engineering geological condition of the sub-grade soils and poor drainage systems.  

Sign in / Sign up

Export Citation Format

Share Document