scholarly journals The Influence of Pyrolitic Degradation on Mechanical Properties of Carbon Fibres within Recycling Composite Materials

2017 ◽  
Vol 63 (4) ◽  
pp. 8-12
Author(s):  
Michal Návrat ◽  
Jaroslav Závada ◽  
Veronika Glogarová
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Carbon Fibre ◽  
Tensile Tests ◽  
Negative Influence ◽  
Carbon Fibres ◽  
Pyrolysis Process

Abstract The article deals with the influence of thermal pyrolytic degradation on mechanical properties of carbon fibres used in the production of composite material. The carbon fibre has been chosen as the reinforcement of composite and the resin formed a matrix (binder). During the pyrolysis process, the resin was eliminated and the carbon fibre was separated. Pyrolysis was carried out at temperatures of 450 °C, 550 °C and 650 °C. Subsequently also tensile tests were performed on the treated material to compare the mechanical properties of the fibres prior to pyrolysis and after decomposition. The results showed negative influence at the selected temperatures during the pyrolysis treatment on the mechanical properties of the carbon fibres.

scholarly journals Synthesis and Characterization of Composite Materials with Enhanced Thermo-Mechanical Properties for Unmanned Aerial Vehicles (Uavs) and Aerospace Technologies

2021 ◽  
Vol 29 (3) ◽  
Author(s):  
Zahid Iqbal Khan ◽  
Zurina Mohamad ◽  
Abdul Razak Rahmat ◽  
Unsia Habib
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Carbon Fibre ◽  
Unmanned Aerial Vehicles ◽  
Low Cost ◽  
Testing Machine ◽  
Carbon Composite ◽  
Scanning Calorimetry ◽  
Aerial Vehicles

Lightweight and high strength composite materials are vital for unmanned aerial vehicles (UAVs) and aerospace technologies with desired characteristics. Carbon composite materials exhibit extraordinary properties for UAVs and aerospace applications. This study aimed to discover the best-prepared composition of composites material having epoxy LY-5052 and carbon fibres laminate for UAVs. Besides, to develop a low cost with high specific strength composite material for aerospace application to replace metallic alloys. In this work, the vacuum bag technique is used to prepare rectangular strips of three different ratios of carbon fibre/epoxy laminates [(40:60), (50:50) and (60:40)] to obtain the best composite in terms of properties. The thermo-mechanical and viscoelastic behaviour of composite materials were evaluated using differential scanning calorimetry (DSC), universal testing machine (UTM) and dynamic mechanical analysis (DMA). The tensile strength of epoxy LY5052 composites with 60 wt% has enhanced to 986%, and glass transition temperature (Tg) was improved from 71oC to 110oC. Overall, 60 wt% carbon fibre exhibits better thermo-mechanical properties with lightweight, which may be a future composite material for aerospace, especially UAVs technologies.

scholarly journals Acoustic Emission and K-S Metric Entropy as Methods for Determining Mechanical Properties of Composite Materials

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 145
Author(s):  
Lesław Kyzioł ◽  
Katarzyna Panasiuk ◽  
Grzegorz Hajdukiewicz ◽  
Krzysztof Dudzik
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Composite Material ◽  
Composite Materials ◽  
Testing Machine ◽  
Measurement Data ◽  
Entropy Method ◽  
Displacement Sensor ◽  
Metric Entropy ◽  
Plastic Phase

Due to the unique properties of polymer composites, these materials are used in many industries, including shipbuilding (hulls of boats, yachts, motorboats, cutters, ship and cooling doors, pontoons and floats, torpedo tubes and missiles, protective shields, antenna masts, radar shields, and antennas, etc.). Modern measurement methods and tools allow to determine the properties of the composite material, already during its design. The article presents the use of the method of acoustic emission and Kolmogorov-Sinai (K-S) metric entropy to determine the mechanical properties of composites. The tested materials were polyester-glass laminate without additives and with a 10% content of polyester-glass waste. The changes taking place in the composite material during loading were visualized using a piezoelectric sensor used in the acoustic emission method. Thanks to the analysis of the RMS parameter (root mean square of the acoustic emission signal), it is possible to determine the range of stresses at which significant changes occur in the material in terms of its use as a construction material. In the K-S entropy method, an important measuring tool is the extensometer, namely the displacement sensor built into it. The results obtained during the static tensile test with the use of an extensometer allow them to be used to calculate the K-S metric entropy. Many materials, including composite materials, do not have a yield point. In principle, there are no methods for determining the transition of a material from elastic to plastic phase. The authors showed that, with the use of a modern testing machine and very high-quality instrumentation to record measurement data using the Kolmogorov-Sinai (K-S) metric entropy method and the acoustic emission (AE) method, it is possible to determine the material transition from elastic to plastic phase. Determining the yield strength of composite materials is extremely important information when designing a structure.

Study on Mechanical Properties of the Composite Materials Film by Speckle Projection Method

2012 ◽  
Vol 496 ◽  
pp. 281-284
Author(s):  
Wen Wen Liu ◽  
Zhi Wang ◽  
Yun Hai Du ◽  
Xian Zhong Xu ◽  
Da Quan Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Projection Method ◽  
Dynamic Deformation ◽  
Calibration Method ◽  
Deformation Measurement ◽  
Lens Distortion

An improved accurate speckle projection method is used for study the mechanical properties of the composite material film in the paper. A system for deformation measurement is developed with the telecentric lenses, in which such conventional lens’ disadvantages such as lens distortion and perspective error will be diminished. Experiments are performed to validate the availability and reliability of the calibration method. The system can also be used to measure the dynamic deformation and then results are also given.

Development of green nanocomposites reinforced by cellulose nanofibers extracted from paper sludge

2015 ◽  
Vol 29 (06n07) ◽  
pp. 1540025 ◽  
Author(s):  
Hitoshi Takagi ◽  
Antonio N. Nakagaito ◽  
Kazuya Kusaka ◽  
Yuya Muneta
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Mechanical Treatment ◽  
Raw Materials ◽  
Cellulose Nanofibers ◽  
Tensile Tests ◽  
Cellulose Nanofiber ◽  
Paper Sludge ◽  
Reinforcing Effect ◽  
Mechanical And Physical Properties

Cellulose nanofibers have been showing much greater potential to enhance the mechanical and physical properties of polymer-based composite materials. The purpose of this study is to extract the cellulose nanofibers from waste bio-resources; such as waste newspaper and paper sludge. The cellulosic raw materials were treated chemically and physically in order to extract individualized cellulose nanofiber. The combination of acid hydrolysis and following mechanical treatment resulted in the extraction of cellulose nanofibers having diameter of about 40 nm. In order to examine the reinforcing effect of the extracted cellulose nanofibers, fully biodegradable green nanocomposites were fabricated by composing polyvinyl alcohol (PVA) resin with the extracted cellulose nanofibers, and then the tensile tests were conducted. The results showed that the enhancement in mechanical properties was successfully obtained in the cellulose nanofiber/PVA green nanocomposites.

scholarly journals Tension mechanical properties of recycled glass-epoxy composite material

2012 ◽  
pp. 189-198 ◽  
Author(s):  
Jelena Petrovic ◽  
Darko Ljubic ◽  
Marina Stamenovic ◽  
Ivana Dimic ◽  
Slavisa Putic
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Composite Materials ◽  
Modulus Of Elasticity ◽  
Epoxy Composite ◽  
Raw Materials ◽  
Mechanical Tests ◽  
Recycled Glass ◽  
Before And After

The significance of composite materials and their applications are mainly due to their good properties. This imposes the need for their recycling, thus extending their lifetime. Once used composite material will be disposed as a waste at the end of it service life. After recycling, this kind of waste can be used as raw materials for the production of same material, which raises their applicability. This indicates a great importance of recycling as a method of the renowal of composite materials. This study represents a contribution to the field of mechanical properties of the recycled composite materials. The tension mechanical properties (tensile strength and modulus of elasticity) of once used and disposed glass-epoxy composite material were compared before and after the recycling. The obtained results from mechanical tests confirmed that the applied recycling method was suitable for glass-epoxy composite materials. In respect to the tensile strength and modulus of elasticity it can be further assessed the possibility of use of recycled glass-epoxy composite materials.

scholarly journals MICROSTRUCTURE RESEARCH OF THE UNIDIRECTIONAL ORGANOPLASTIC BASED ON RUSAR-NT ARAMID FIBERS AND EPOXY-POLYSULFONE BINDER

2020 ◽  
pp. 19-26
Author(s):  
E.N. Kablov ◽  
◽  
G.S. Kulagina ◽  
G.F. Zhelezina ◽  
S.L. Lonskii ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Composite Material ◽  
Polymer Matrix ◽  
Packing Density ◽  
Tensile Tests ◽  
Polymer Composite Material ◽  
Aramid Fibers ◽  
Before And After ◽  
Binder Structure

This paper studies a polymer composite material - a unidirectional organoplastic based on Rusar-NT aramid fiber and a melt epoxy-polysulfone binder. Organoplastic has the following mechanical properties: tensile strength 2060 MPa, Young's modulus 101 GPa. The microstructure of the fiber and the polymer matrix in the organoplastic samples was studied before and after tensile tests. The features of the formation of the binder structure depending on the packing density of the fibers in organoplastics have been determined. The nature of the destruction of fibers and polymer matrix caused by the uniaxial tension has been studied.

Investigation of Mechanical Properties of Silk and Epoxy Composite Materials

2021 ◽  
Vol 889 ◽  
pp. 27-31
Author(s):  
Norie A. Akeel ◽  
Vinod Kumar ◽  
Omar S. Zaroog
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Composite Materials ◽  
Epoxy Composite ◽  
Mechanical Test ◽  
Weight Ratio ◽  
Industrial Applications ◽  
Sem Analysis ◽  
Equivalent Strength ◽  
Test Impact

This research Investigates the new composite materials are fabricated of two or more materials raised. The fibers material from the sources of natural recycled materials provides certain benefits above synthetic strengthening material given that very less cost, equivalent strength, less density, and the slightest discarded difficulties. In the current experiments, silk and fiber-reinforced epoxy composite material is fabricated and the mechanical properties for the composite materials are assessed. New composite materials samples with the dissimilar fiber weight ratio were made utilizing the compression Molding processes with the pressure of 150 pa at a temperature of 80 °C. All samples were exposed to the mechanical test like a tensile test, impact loading, flexural hardness, and microscopy. The performing results are the maximum stress is 33.4MPa, elastic modulus for the new composite material is 1380 MPa, and hardness value is 20.64 Hv for the material resistance to scratch, SEM analysis of the microstructure of new composite materials with different angles of layers that are more strength use in industrial applications.

scholarly journals A Study of Some Mechanical Properties of Composite Materials with a Dammar-Based Hybrid Matrix and Reinforced by Waste Paper

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1688
Author(s):  
Marius Marinel Stănescu ◽  
Dumitru Bolcu
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Epoxy Resin ◽  
Volume Ratio ◽  
Tensile Tests ◽  
Sem Analysis ◽  
Waste Paper ◽  
Hybrid Resin ◽  
Natural Resin ◽  
Tensile Response

When obtaining environment-friendly hybrid resins made of a blend of Dammar natural resin, in a prevailing volume ratio, with epoxy resin, it is challenging to find alternatives for synthetic resins. Composite materials reinforced with waste paper and matrix made of epoxy resin or hybrid resin with a volume ratio of 60%, 70% and 80% Dammar were studied. All samples obtained have been submitted to tensile tests and Scanning Electron Microscopy (SEM) analysis. The tensile response, tensile strength, modulus of elasticity, elongation at break and the analysis of the fracture surface were determined. The damping properties of vibrations of bars in hybrid resins and in the composite materials under study were also examined. The mechanical properties of the four types of resins and of the composite materials were compared. The chemical composition for a hybrid resin specimen were obtained using the Fourier Transformed Infrared Spectroscopy (FTIR) and Energy, Dispersive X-ray Spectrometry (EDS) analyzes.

Sign in / Sign up

Export Citation Format

Share Document