Green synthesis and characterization of flower-like PbS and metal-doped nanostructures via hydrothermal method

2017 ◽  
Vol 40 (1-2) ◽  
Author(s):  
Mohsen Kord ◽  
Kambiz Hedayati ◽  
Marziyeh Farhadi
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Method ◽  
Ultra Violet ◽  
Cost Effective ◽  
Effect Of Temperature ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Metal Doped ◽  
Acid Blue

AbstractIn this work, flower-like nanoparticles of lead sulfide (PbS) and metal-doped PbS nanostructures were synthesized via a simple hydrothermal method in water as a green solvent. The effect of temperature, precipitating agent and capping agent on the morphology and particle size of the products was investigated. Sugars were used as green, safe, cost-effective, and bio-compatible capping agents. The prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and ultra violet-visible spectroscopy. The effect of PbS as a photocatalyst on the degradation of three different azo dyes was investigated. Acid brown, acid violet, and acid blue were totally degraded at 60 min under ultra-violet irradiation.

scholarly journals The Characterization of Lithium Titanate Microspheres Synthesized by a Hydrothermal Method

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Wei Liu ◽  
Yu Wang ◽  
Xiaolin Jia ◽  
Baojia Xia
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Method ◽  
Hydrothermal Reaction ◽  
Lithium Titanate ◽  
Kirkendall Effect ◽  
X Ray Diffraction ◽  
Average Pore ◽  
Transmission Electron ◽  
Adsorption Desorption

Lithium titanate microspheres were synthesized by a hydrothermal method. The structure and morphology of samples were characterized by X-ray diffraction, infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy, respectively. The specific surface area and average pore diameter of samples were studied by N2adsorption-desorption isotherms. The results indicated that amorphous phase changed to lithium titanium oxide hydrate, accompanying mesopores formed between agglomerated primary particles in hydrothermal reaction. After sintering, mesoporous Li4Ti5O12microspheres assembled by nanosized particle were obtained and had a diameter of about 400–700 nm. Then, a possible formation process analogous to the Kirkendall effect was proposed. Moreover, the effect of sintering temperature on the electrochemical properties of Li4Ti5O12microspheres was investigated.

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

scholarly journals Preparation and Characterization of Polyhydroxybutyrate/Polycaprolactone Nanocomposites

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Cha Ping Liau ◽  
Mansor Bin Ahmad ◽  
Kamyar Shameli ◽  
Wan Md Zin Wan Yunus ◽  
Nor Azowa Ibrahim ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Basal Spacing ◽  
Cooh Group ◽  
Physical Interaction ◽  
X Ray Diffraction ◽  
Ion Exchange Reaction ◽  
Transmission Electron ◽  
Matrix Enhancement ◽  
Double Hydroxide

Polyhydroxybutyrate (PHB)/polycaprolactone (PCL)/stearate Mg-Al layered double hydroxide (LDH) nanocomposites were prepared via solution casting intercalation method. Coprecipitation method was used to prepare the anionic clay Mg-Al LDH from nitrate salt solution. Modification of nitrate anions by stearate anions between the LDH layers via ion exchange reaction. FTIR spectra showed the presence of carboxylic acid (COOH) group which indicates that stearate anions were successfully intercalated into the Mg-Al LDH. The formation of nanocomposites only involves physical interaction as there are no new functional groups or new bonding formed. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the mixtures of nanocomposites are intercalated and exfoliated types. XRD results showed increasing of basal spacing from 8.66 to 32.97 Å in modified stearate Mg-Al LDH, and TEM results revealed that the stearate Mg-Al LDH layers are homogeneously distributed in the PHB/PCL polymer blends matrix. Enhancement in 300% elongation at break and 66% tensile strength in the presence of 1.0 wt % of the stearate Mg-Al LDH as compare with PHB/PCL blends. Scanning electron microscopy (SEM) proved that clay improves compatibility between polymer matrix and the best ratio 80PHB/20PCL/1stearate Mg-Al LDH surface is well dispersed and stretched before it breaks.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

scholarly journals Shape Tuning of Magnetite Nanoparticles Obtained by Hydrothermal Synthesis: Effect of Temperature

2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Nayely Torres-Gómez ◽  
Osvaldo Nava ◽  
Liliana Argueta-Figueroa ◽  
René García-Contreras ◽  
Armando Baeza-Barrera ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Nanoparticle Synthesis ◽  
Effect Of Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Pure Phase ◽  
High Level ◽  
Shape Tuning ◽  
Magnetite Phase

In this work, we present a simple and efficient method for pure phase magnetite (Fe3O4) nanoparticle synthesis. The phase structure, particle shape, and size of the samples were characterized by Raman spectroscopy (Rm), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDS), and transmission electron microscopy (TEM). The morphology tuning was controlled by the temperature of the reaction; the nanoparticles were synthesized via the hydrothermal method at 120°C, 140°C, and 160°C, respectively. The Rm and XRD spectra showed that all the nanoparticles were Fe3O4 in a pure magnetite phase. The obtained nanoparticles exhibited a high level of crystallinity with uniform morphology at each temperature, as can be observed through TEM and SEM. These magnetic nanoparticles exhibited good saturation magnetization and the resulting shapes were quasi-spheres, octahedrons, and cubes. The samples showed striking magnetic properties, which were examined by a vibrating sample magnetometer (VSM). It has been possible to obtain a good morphological control of nanostructured magnetite in a simple, economical, and scalable method by adjusting the temperature, without the modification of any other synthesis parameter.

scholarly journals An Efficient and Novel Ammonia Sensor Based on Polypyrrole/Tin Oxide/MWCNT Nanocomposite

2020 ◽  
Vol 32 (6) ◽  
pp. 1505-1510
Author(s):  
Ahmad Husain ◽  
Mohd Urooj Shariq ◽  
Anees Ahmad
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Charge Carriers ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Ammonia Sensing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

In present study, the synthesis and characterization of a novel polypyrrole (PPy)/tin oxide (SnO2)/MWCNT nanocomposite along with pristine polypyrrole is reported. These materials have been studied for their structural and morphological properties by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. PPy/SnO2/MWCNT nanocomposite has been converted into a pellet-shaped sensor, and its ammonia sensing studies were carried out by calculating the variation in the DC electrical conductivity at different concentration of ammonia ranging from 10 to 1500 ppm. The sensing response of the sensor was determined at 1500, 1000, 500, 200, 100 and 10 ppm and found to be 70.4, 66.1, 62.2, 55.4, 50.8 and 39.7%, respectively The sensor showed a complete reversibility at lower concentrations along with excellent selectivity and stability. Finally, a sensing mechanism was also proposed involving polarons (charge carriers) of polypyrrole and lone pairs of ammonia molecules

scholarly journals Gnidia glauca- and Plumbago zeylanica-Mediated Synthesis of Novel Copper Nanoparticles as Promising Antidiabetic Agents

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Dhiraj A. Jamdade ◽  
Dishantsingh Rajpali ◽  
Komal A. Joshi ◽  
Rohini Kitture ◽  
Anuja S. Kulkarni ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Copper Nanoparticles ◽  
Critical Role ◽  
Cost Effective ◽  
Significant Inhibition ◽  
Antidiabetic Activity ◽  
X Ray Diffraction ◽  
One Pot ◽  
Plumbago Zeylanica ◽  
Transmission Electron

Rapid, eco-friendly, and cost-effective one-pot synthesis of copper nanoparticles is reported here using medicinal plants like Gnidia glauca and Plumbago zeylanica. Aqueous extracts of flower, leaf, and stem of G. glauca and leaves of P. zeylanica were prepared which could effectively reduce Cu2+ ions to CuNPs within 5 h at 100°C which were further characterized using UV-visible spectroscopy, field emission scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, dynamic light scattering, X-ray diffraction, and Fourier-transform infrared spectroscopy. Further, the CuNPs were checked for antidiabetic activity using porcine pancreatic α-amylase and α-glucosidase inhibition followed by evaluation of mechanism using circular dichroism spectroscopy. CuNPs were found to be predominantly spherical in nature with a diameter ranging from 1 to 5 nm. The phenolics and flavonoids in the extracts might play a critical role in the synthesis and stabilization process. Significant change in the peak at ∼1095 cm−1 corresponding to C-O-C bond in ether was observed. CuNPs could inhibit porcine pancreatic α-amylase up to 30% to 50%, while they exhibited a more significant inhibition of α-glucosidase from 70% to 88%. The mechanism of enzyme inhibition was attributed due to the conformational change owing to drastic alteration of secondary structure by CuNPs. This is the first study of its kind that provides a strong scientific rationale that phytogenic CuNPs synthesized using G. glauca and P. zeylanica can be considered to develop candidate antidiabetic nanomedicine.

Characterization of Fe–Ni(C) nanocapsules synthesized by arc discharge in methane

1999 ◽  
Vol 14 (5) ◽  
pp. 1782-1790 ◽  
Author(s):  
X. L. Dong ◽  
Z. D. Zhang ◽  
S. R. Jin ◽  
W. M. Sun ◽  
X. G. Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Arc Discharge ◽  
Carbon Layer ◽  
Magnetization Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Disperse Spectroscopy

Ultrafine Fe–Ni(C) particles of various compositions were prepared by arc discharge synthesis in a methane atmosphere. The particles were characterized by x-ray diffraction, transmission electron microscopy, energy disperse spectroscopy, chemical analysis, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and magnetization measurement. The carbon atoms solubilizing at interstitial sites in γ–(Fe, Ni, C) solution particles have the effects of forming austenite structure and changing microstructures as well as magnetic properties. A carbon layer covers the surface of Fe–Ni(C) particles to form the nanocapsules and protect them from oxidization. The mechanism of forming Fe–Ni(C) nanocapsules in the methane atmosphere was analyzed.

Microstructural Characterization of Pt/Ti and RuO2 Electrodes on SiO2/Si Annealed in the Oxygen Ambient

1996 ◽  
Vol 433 ◽  
Author(s):  
Jeong Soo Lee ◽  
Hyun JA Kwon ◽  
Young Woo Jeong ◽  
Hyun HA Kim ◽  
Kyu HO Park ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Film Surface ◽  
Microstructural Characterization ◽  
Silicide Phase ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Degree Of Oxidation ◽  
Thin Interlayer ◽  
Increasing Temperature

AbstractMicrostructures and interdiffusions of Pt/Ti/SiO2/Si and RuO2/SiO2/Si during annealing in O2 were investigated using x-ray diffraction, Auger electron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The degree of oxidation and the interdiffusion of elements have remarkably increased with increasing temperature above 500 °C for the Pt/Ti/SiO2/Si case. The generation of Pt hillocks commenced at 500 °C. The Pt-silicide phase was also observed near the TiOx/SiO2 interface. The microstructural variations occurred to only a small amount for the RuO2/SiO2/Si case over the temperature range 300 – 700 °C. While there was no hillock formation, the RuO2 film surface was roughened by the thermal grooving phenomenon. A thin interlayer phase was found at the RuO2/SiO2 interface.

Sign in / Sign up

Export Citation Format

Share Document