scholarly journals Study of nanoclay blends based on poly(ethylene terephthalate)/poly(ethylene naphthalene 2,6-dicarboxylate) prepared by reactive extrusion

2014 ◽  
Vol 34 (5) ◽  
pp. 431-439 ◽  
Author(s):  
Foued Zouai ◽  
Said Bouhelal ◽  
M. Esperanza Cagiao ◽  
Fatma Zohra Benabid ◽  
Djafer Benachour ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
Tensile Modulus ◽  
Reactive Extrusion ◽  
Organic Peroxide ◽  
Scanning Calorimetry ◽  
Tetramethylthiuram Disulfide ◽  
X Ray Scattering ◽  
Poly Ethylene Terephthalate ◽  
One Step ◽  
Poly Ethylene

Abstract The success of processing compatible blends, based on poly(ethylene terephthalate) (PET)/poly(ethylene naphthalene 2,6-dicarboxylate) (PEN)/clay nanocomposites in one step by reactive melt extrusion is described. Untreated clay was first purified and functionalized “in situ” with a compound based on an organic peroxide/sulfur mixture and (tetramethylthiuram disulfide) as the activator for sulfur. The PET and PEN materials were first separately mixed in the molten state with functionalized clay. The PET/4 wt% clay and PEN/7.5 wt% clay compositions showed total exfoliation. These compositions, denoted nPET and nPEN, respectively, were used to prepare new nPET/nPEN nanoblends in the same mixing batch. The nPET/nPEN nanoblends were compared to neat PET/PEN blends. The blends and nanocomposites were characterized using various techniques. Microstructural and nanostructural properties were investigated. Fourier transform infrared spectroscopy (FTIR) results showed that the exfoliation of tetrahedral clay nanolayers is complete and the octahedral structure totally disappears. It was shown that total exfoliation, confirmed by wide angle X-ray scattering (WAXS) measurements, contributes to the enhancement of impact strength and tensile modulus. In addition, WAXS results indicated that all samples are amorphous. The differential scanning calorimetry (DSC) study indicated the occurrence of one glass transition temperature Tg, one crystallization temperature Tc and one melting temperature Tm for every composition. This was evidence that both PET/PEN and nPET/nPEN blends are compatible in the entire range of compositions. In addition, the nPET/nPEN blends showed lower Tc and higher Tm values than the corresponding neat PET/PEN blends. In conclusion, the results obtained indicate that nPET/nPEN blends are different from the pure ones in nanostructure and physical behavior.

In Situ High Temperature X-Ray Diffraction Studies of Modified Poly(Ethylene Terephthalate)

1992 ◽  
Vol 36 ◽  
pp. 379-386
Author(s):  
T. Blanton ◽  
R. Seyler
Keyword(s):  
High Temperature ◽  
Ethylene Terephthalate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Pet Crystallization

The effect of dimethyl-5-sodiosulfoisophthalate, SIP, on poly(ethylene terephthalate), PET, crystallization has been studied using in situ high-temperature x-ray diffraction, HTXRD. At low levels of SIP modification, PET-like crystallinity was observed. At high SIP levels, clustering of polyester ionomers was observed and crystallization was significantly suppressed. The HTXRD data along with differential scanning calorimetry, DSC, and small angle x-ray scattering, SAXS, indicate that the change from bulk crystallization to bulk ionomer formation occurred when 8-12 mol% of the diester linkages contained SIP.

scholarly journals Comparative Study of Structural Changes of Polylactide and Poly(ethylene terephthalate) in the Presence of Trichoderma viride

2021 ◽  
Vol 22 (7) ◽  
pp. 3491
Author(s):  
Grażyna B. Dąbrowska ◽  
Zuzanna Garstecka ◽  
Ewa Olewnik-Kruszkowska ◽  
Grażyna Szczepańska ◽  
Maciej Ostrowski ◽  
...  
Keyword(s):  
Structural Changes ◽  
Ethylene Terephthalate ◽  
Molecular Mechanisms ◽  
Blot Hybridization ◽  
Trichoderma Viride ◽  
Cost Effective ◽  
Plastic Pollution ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

Plastic pollution is one of the crucial global challenges nowadays, and biodegradation is a promising approach to manage plastic waste in an environment-friendly and cost-effective way. In this study we identified the strain of fungus Trichoderma viride GZ1, which was characterized by particularly high pectinolytic activity. Using differential scanning calorimetry, Fourier-transform infrared spectroscopy techniques, and viscosity measurements we showed that three-month incubation of polylactide and polyethylene terephthalate in the presence of the fungus lead to significant changes of the surface of polylactide. Further, to gain insight into molecular mechanisms underneath the biodegradation process, western blot hybridization was used to show that in the presence of poly(ethylene terephthalate) (PET) in laboratory conditions the fungus produced hydrophobin proteins. The mycelium adhered to the plastic surface, which was confirmed by scanning electron microscopy, possibly due to the presence of hydrophobins. Further, using atomic force microscopy we demonstrated for the first time the formation of hydrophobin film on the surface of aliphatic polylactide (PLA) and PET by T. viride GZ1. This is the first stage of research that will be continued under environmental conditions, potentially leading to a practical application.

The Melting Behavior of Poly(Ethylene Terephthalate)/ Attapulgite Nanocomposites

2013 ◽  
Vol 773 ◽  
pp. 530-533
Author(s):  
Chen Liu ◽  
Xiang Hui Lu ◽  
Xue Qi ◽  
Peng Li
Keyword(s):  
Crystallization Temperature ◽  
Isothermal Crystallization ◽  
Ethylene Terephthalate ◽  
Melting Process ◽  
Melting Behavior ◽  
Crystallization Time ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene ◽  
Crystallization From The Melt

The melting and recrystallization behavior of Poly(ethylene terephthalate) (PET)/ Attapulgite(At)nanocomposites after isothermal crystallization from the melt was studied by Step-scan differential scanning calorimetry (SDSC). The influence of At contents, crystallization temperature and crystallization time on the melting process were examined. Two melting endotherms(in the SDSC CP.A curves, reversible part) and one recrystallization exotherm (in the SDSC CP.IsoK curves, irreversible part)of PET/At nanocomposites after isothermal crystallization were observed during the melt process. This ascribes to the melting-recrystallization mechanism .The low temperature endotherm attributes to the melting of primary crystal formed during the isothermal treating and the high temperature endotherm resulting from the melting of recrystallization materials. The reason why more recrystallization happened with the increase of At content was given and the process of recrystallization was described in detail. The effects of crystal perfection and recrystallization were minimized by increasing of crystallization temperature and time.

Thermal Properties of Ester-Type Easy Cationic Dyeable Poly(ethylene Terephthalate) (ECDP) Polymers

2010 ◽  
Vol 44-47 ◽  
pp. 2409-2413 ◽  
Author(s):  
Yu Sun ◽  
Guo Zheng ◽  
Hong Xiang Yang ◽  
Yan Jun Liu ◽  
Xiao Ning Li
Keyword(s):  
Thermal Properties ◽  
Diethylene Glycol ◽  
Ethylene Terephthalate ◽  
Glycol Succinate ◽  
Glycol Adipate ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Monomer Content ◽  
Diethylene Glycol Succinate ◽  
Poly Ethylene

This study investigated the thermal properties of ester-type easy cationic dyeable poly(ethylene terephthalate) (ECDP) polymers using differential scanning calorimetry (DSC), therogravimetric analysis (TGA). The mass ratios of 5-sodium sulfo bis(-hydroxyethyl) isophthalate(SIPE) for ECDP polymers were 2.8%, 5.5%, 6.8%, respectively. The fourth monomers were diethylene glycol adipate (DGA), diethylene glycol succinate (DGS) and diethylene glycol subacate (DES) with different contents. The results suggested that the Tg of ester-type ECDP decreased with the increasing the molecule weight of the fourth monomer at fixed SIPE and fourth monomer contents. The Tch of ECDP polymer to be lower than that of the CDP polymer with the same SIPE content. And it decreased as SIPE and fourth monomer contents increased, it also decreased with the increasing of the molecule weight of the fourth monomer given the same SIPE content. The effect of the ester-type soft segments reduced the Tm of ECDP. The thermal stability of ECDP polymer was less than PET and CDP polymers, and it decreased with increasing SIPE content, but increased with the ester-type fourth monomer content increasing.

Sign in / Sign up

Export Citation Format

Share Document