Effect of graphite and silicon carbide fillers on mechanical properties of PA6 polymer composites

2017 ◽  
Vol 37 (6) ◽  
pp. 547-557 ◽  
Author(s):  
Sekaran Sathees Kumar ◽  
Ganesan Kanagaraj
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Polymer Composites ◽  
Interfacial Adhesion ◽  
Hybrid Composites ◽  
Fracture Morphology ◽  
Tensile Fracture ◽  
Injection Molded ◽  
The Individual

Abstract In this paper, the combined effect of different weight percentages of silicon carbide (SiC) and graphite (Gr) reinforcement on the mechanical properties of polyamide (PA6) composite is studied. Test specimens of pure PA6, 85 wt% PA6+10 wt% SiC+5 wt% Gr and 85 wt% PA6+5 wt% SiC+10 wt% Gr are prepared using an injection molding machine. The tensile, impact, hardness, morphology and thermal properties of the injection molded composites were investigated. The obtained results showed that mechanical properties, such as tensile and impact strength and modulus of the PA6 composites, were significantly higher than the pure PA6, and hybridization with silicon carbide and graphite further enhanced the performance properties, as well as the thermal resistance of the composites. The tensile fracture morphology and the characterization of PA6 polymer composites were observed by scanning electron microscope (SEM) and Fourier transform infrared spectroscopic methods. SEM observation of the fracture surfaces showed the fine dispersion of SiC and Gr for strong interfacial adhesion between fibers and matrix. The individual and combined reinforcing effects of silicon carbide and graphite on the mechanical properties of PA6 hybrid composites were compared and interpreted in this study. Improved mechanical properties were observed by the addition of small amount of SiC and Gr concurrently reinforced with the pure PA6. Finally, thermogravimetric analysis showed that the heat resistance of the composites tended to increase with increasing silicon carbide and graphite content simultaneously.

scholarly journals The Influence of MMA Esterification on Interfacial Adhesion and Mechanical Properties of Hybrid Kenaf Bast/Glass Fiber Reinforced Unsaturated Polyester Composites

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2276
Author(s):  
Rozyanty Rahman ◽  
Syed Zhafer Firdaus Syed Putra ◽  
Shayfull Zamree Abd Rahim ◽  
Irwana Nainggolan ◽  
Bartłomiej Jeż ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Interfacial Adhesion ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Research Work ◽  
Tensile Fracture ◽  
Kenaf Bast

The demand for natural fiber hybrid composites for various applications has increased, which is leading to more research being conducted on natural fiber hybrid composites due to their promising mechanical properties. However, the incompatibility of natural fiber with polymer matrix limits the performance of the natural fiber hybrid composite. In this research work, the mechanical properties and fiber-to-matrix interfacial adhesion were investigated. The efficiency of methyl methacrylate (MMA)-esterification treatments on composites’ final product performance was determined. The composite was prepared using the hand lay-up method with varying kenaf bast fiber (KBF) contents of 10, 15, 20, 25, 30, 35 (weight%) and hybridized with glass fiber (GF) at 5 and 10 (weight%). Unsaturated polyester (UPE) resin and methyl ethyl ketone peroxide (MEKP) were used as binders and catalysts, respectively. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to examine the effects of MMA-esterification treatment on tensile strength and morphology (tensile fracture and characterization of MMA-esterification treatment) of the composite fabricated. The tensile strength of MMA-treated reinforced UPE and hybrid composites are higher than that of untreated composites. As for MMA treatment, 90 min of treatment showed the highest weight percent gain (WPG) and tensile strength of KBF-reinforced UPE composites. It can be concluded that the esterification of MMA on the KBF can lead to better mechanical properties and adhesion between the KFB and the UPE matrix. This research provides a clear reference for developing hybrid natural fibers, thus contributing to the current field of knowledge related to GF composites, specifically in transportation diligences due to their properties of being lightweight, superior, and involving low production cost.

Correlation between Curing Temperature and the Properties of Conductive Composites

2013 ◽  
Vol 750-752 ◽  
pp. 119-122 ◽  
Author(s):  
Xiao Ya Wang ◽  
Zhi Dong Xia ◽  
Zhe Li
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Crosslink Density ◽  
Fracture Morphology ◽  
Curing Temperature ◽  
Tensile Fracture ◽  
Elongation At Break ◽  
Conductive Composites ◽  
The Stability ◽  
Better Than

This study was carried out to discuss the influence of curing temperature on the performance of conductive composites filled with nickel-coated graphite (NCG). The electrical conductivity, crosslink density, mechanical properties and tensile fracture morphology have been investigated. The results indicated that curing temperature had great impact on the electrical conductivity and mechanical properties. Voluem resistivity decreased from 43.1 to 0.08 ohm-cm at 125°C-205°C, and the reason was discussed in light of formation and break of the conductive network in the composites. The stability of SR-NCG cured at 165°C-205°C were also better than those cured at other curing temperature. Besides, tensile strength increased from 2.41 to 7.19Mpa at 125°C-225°C, elongation at break have a 56% increase, and Shore A hardness also incresed from 74 to 82.

scholarly journals Technological Relevance, Research Prospect and Applications of Aluminium-Silicon Carbide-Graphite Hybrid Metal Matrix Composites for Thermal Characterization

2018 ◽  
Vol 8 (02) ◽  
Author(s):  
S A Mohan Krishna ◽  
T N Shridhar ◽  
L Krishnamurthy ◽  
K B Vinay ◽  
G V Naveen Prakash
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Thermal Expansion ◽  
Hybrid Composites ◽  
Coefficient Of Thermal Expansion ◽  
Aluminium Matrix ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Research Prospect

Aluminium matrix composites belong to the family of materials whose mechanical, tribological, thermal and electrical properties can be customized effectively. Most of the commercial work on MMCs has been highlighted on Aluminium as the matrix material. The combination of light weight, environmental resistance and beneficial mechanical properties has made Aluminium alloys exceedingly popular; these properties also make Aluminium best suited for use as a matrix metal. The thermophysical properties of these composites can be tailor made and have excellent specific mechanical properties. These composites can be fabricated with ease. Aluminium matrix composites reinforced with the particles of Silicon Carbide possess high yield strength, low coefficient of thermal expansion or thermal expansivity, high modulus of elasticity and excellent wear resistance by maintaining volume proportion up to 20%. Aluminium hybrid composites can be customized to provide moderate Coefficient of Thermal Expansion (CTE) and high thermal conductivity that are favorable for the applications pertaining to thermal management equipment. However, it is necessary to evaluate different percentage combinations of reinforcements with matrix Aluminium to check for thermal stability and to measure thermal conductivity and coefficient of thermal expansion. It is expected that, Aluminium-Silicon Carbide-Graphite hybrid composites can be used as load bearing material for the above applications. In this paper, a review about the said hybrid composites to investigate thermal properties for engineering applications have been discussed based on its technological relevance, applications and research prospect.

Sign in / Sign up

Export Citation Format

Share Document