scholarly journals The Influence of MMA Esterification on Interfacial Adhesion and Mechanical Properties of Hybrid Kenaf Bast/Glass Fiber Reinforced Unsaturated Polyester Composites

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2276
Author(s):  
Rozyanty Rahman ◽  
Syed Zhafer Firdaus Syed Putra ◽  
Shayfull Zamree Abd Rahim ◽  
Irwana Nainggolan ◽  
Bartłomiej Jeż ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Interfacial Adhesion ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Research Work ◽  
Tensile Fracture ◽  
Kenaf Bast

The demand for natural fiber hybrid composites for various applications has increased, which is leading to more research being conducted on natural fiber hybrid composites due to their promising mechanical properties. However, the incompatibility of natural fiber with polymer matrix limits the performance of the natural fiber hybrid composite. In this research work, the mechanical properties and fiber-to-matrix interfacial adhesion were investigated. The efficiency of methyl methacrylate (MMA)-esterification treatments on composites’ final product performance was determined. The composite was prepared using the hand lay-up method with varying kenaf bast fiber (KBF) contents of 10, 15, 20, 25, 30, 35 (weight%) and hybridized with glass fiber (GF) at 5 and 10 (weight%). Unsaturated polyester (UPE) resin and methyl ethyl ketone peroxide (MEKP) were used as binders and catalysts, respectively. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to examine the effects of MMA-esterification treatment on tensile strength and morphology (tensile fracture and characterization of MMA-esterification treatment) of the composite fabricated. The tensile strength of MMA-treated reinforced UPE and hybrid composites are higher than that of untreated composites. As for MMA treatment, 90 min of treatment showed the highest weight percent gain (WPG) and tensile strength of KBF-reinforced UPE composites. It can be concluded that the esterification of MMA on the KBF can lead to better mechanical properties and adhesion between the KFB and the UPE matrix. This research provides a clear reference for developing hybrid natural fibers, thus contributing to the current field of knowledge related to GF composites, specifically in transportation diligences due to their properties of being lightweight, superior, and involving low production cost.

Influence of stacking sequence and orientation of the fabric on mechanical properties of twill Kenaf/Kevlar reinforced unsaturated polyester hybrid composites

2021 ◽  
pp. 152808372110199
Author(s):  
HT Sreenivas ◽  
N Krishnamurthy ◽  
MS Murali ◽  
GR Arpitha
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Flexural Strength ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Synthetic Fiber ◽  
Stacking Sequence ◽  
The Matrix

The current study investigates on development of hybrid composite with Kenaf/Kevlar as reinforcement and unsaturated Polyester as the matrix considering stacking sequence, the orientation of fabric and twill 2x2 weave of the Kenaf fabric in particular. Five laminates (L1, L2, L3, L4, and L5) were developed by stacking the lamina's one over the other with the matrix and then cured in an autoclave. The laminates were subjected to experimental investigation to evaluate mechanical properties such as tensile strength, flexural strength, hardness, and impact strength. Results indicate that L5 shows good flexural strength and modulus, high hardness, and good impact strength, whereas L4 indicates the best tensile strength and tensile modulus. To summarize, the hybridization resulted in an average of 30% increased mechanical property for Laminate L5. The effect of stacking in L5 has a significant impact on the property of the composite. The results of the study were mainly focused on minimizing the use of synthetic fiber and replacing it with natural fiber. SEM analysis was performed on fractured surfaces of specimens which revealed that the failure of the laminated composite is due to poor interfacial bonding among fiber and matrix. Overall, the composite obtained from the combination of Kenaf and Kevlar fabrics had the best balance of properties finds appropriate application for car bumpers, fenders, boat hull, turbine blade etc.

Effect of Fiber Parameters on the Mechanical Properties of Banana-Glass Fiber Hybrid Composites

2014 ◽  
Vol 592-594 ◽  
pp. 202-205
Author(s):  
V. Santhanam ◽  
M. Chandrasekaran ◽  
N. Venkateshwaran
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Fiber ◽  
Fiber Length ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Synthetic Fiber

Composite materials are widely used for their superior properties such as high strength to weight ratio, high tensile strength, low thermal expansion, low density etc. Due to environmental issues the eco-friendly composites are being explored. Natural fibers as reinforcement for polymer composites are widely studied. But natural fibers lack better mechanical properties when compared with synthetic fibers. Hence mixing the natural fiber with a synthetic fiber such as glass fiber will improve mechanical properties of the composites. In this study banana fiber is mixed with glass fiber, and the mixture is used as reinforcement in epoxy matrix. The composite specimens were prepared using hand layup technique, the fibers were randomly oriented. Further the fiber length was varied as 10, 15, 20 and 25mm and volume fraction as 10%, 15%, 20% and 25%. Experiments were conducted to find the effect of fiber length and volume fraction on tensile strength, flexural strength, water absorption properties of the composites. It is observed that a fiber length of 20mm and 20% fiber volume fraction gave better mechanical properties.

Effect of graphite and silicon carbide fillers on mechanical properties of PA6 polymer composites

2017 ◽  
Vol 37 (6) ◽  
pp. 547-557 ◽  
Author(s):  
Sekaran Sathees Kumar ◽  
Ganesan Kanagaraj
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Polymer Composites ◽  
Interfacial Adhesion ◽  
Hybrid Composites ◽  
Fracture Morphology ◽  
Tensile Fracture ◽  
Injection Molded ◽  
The Individual

Abstract In this paper, the combined effect of different weight percentages of silicon carbide (SiC) and graphite (Gr) reinforcement on the mechanical properties of polyamide (PA6) composite is studied. Test specimens of pure PA6, 85 wt% PA6+10 wt% SiC+5 wt% Gr and 85 wt% PA6+5 wt% SiC+10 wt% Gr are prepared using an injection molding machine. The tensile, impact, hardness, morphology and thermal properties of the injection molded composites were investigated. The obtained results showed that mechanical properties, such as tensile and impact strength and modulus of the PA6 composites, were significantly higher than the pure PA6, and hybridization with silicon carbide and graphite further enhanced the performance properties, as well as the thermal resistance of the composites. The tensile fracture morphology and the characterization of PA6 polymer composites were observed by scanning electron microscope (SEM) and Fourier transform infrared spectroscopic methods. SEM observation of the fracture surfaces showed the fine dispersion of SiC and Gr for strong interfacial adhesion between fibers and matrix. The individual and combined reinforcing effects of silicon carbide and graphite on the mechanical properties of PA6 hybrid composites were compared and interpreted in this study. Improved mechanical properties were observed by the addition of small amount of SiC and Gr concurrently reinforced with the pure PA6. Finally, thermogravimetric analysis showed that the heat resistance of the composites tended to increase with increasing silicon carbide and graphite content simultaneously.

Mechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene Composites

2008 ◽  
Vol 47-50 ◽  
pp. 486-489 ◽  
Author(s):  
Kasama Jarukumjorn ◽  
Nitinat Suppakarn ◽  
Jongrak Kluengsamrong
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Weight Ratio ◽  
Morphological Properties ◽  
Fiber Reinforced ◽  
Polypropylene Composites ◽  
Specific Strength ◽  
Fiber Reinforced Polymer Composites

Natural fiber reinforced polymer composites became more attractive due to their light weight, high specific strength, biodegradability. However, some limitations e.g. low modulus, poor moisture resistance were reported. The mechanical properties of natural fiber reinforced composites can be improved by hybridization with synthetic fibers such as glass fiber. In this research, mechanical properties of short sisal-PP composites and short sisal/glass fiber hybrid composites were studied. Polypropylene grafted with maleic anhydride (PP-g-MA) was used as a compatibilizer to enhance the compatibility between the fibers and polypropylene. Effect of weight ratio of sisal and glass fiber at 30 % by weight on the mechanical properties of the composites was investigated. Morphology of fracture surface of each composite was also observed.

Glass Fiber/Waste Cotton Fabric Reinforced Hybrid Composites: Mechanical Investigations

2017 ◽  
Vol 263 ◽  
pp. 179-183 ◽  
Author(s):  
Mehmet Safa Bodur ◽  
Mustafa Bakkal ◽  
Karl Englund
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Glass Fiber ◽  
Composite Structures ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Cotton Fibers ◽  
Reinforced Composites ◽  
Hybridization Effect

In this study, the hybridization effect on the mechanical properties of the natural fiber reinforced composites was investigated. For this purpose, glass fibers in different ratios of 2.5, 5 and 10 wt% were added in the polymer composites with cotton fibers at the ratios of 12.5 and 25 wt%. In order to have better interfacial bonding and increase the effectiveness of glass fiber on the mechanical properties, maleic anhydride coupling agent was added in the hybrid composite structures. At the end of the study, the best ratios of maleic anhydride, cotton and glass fiber for this kind composites were explored with respect to the economical and mechanical concerns. This study suggests that hybridization can be considered as most promising way to improve the mechanical properties for this novel composite materials.

scholarly journals Mechanical Properties of Abaca–Glass Fiber Composites Fabricated by Vacuum-Assisted Resin Transfer Method

Polymers ◽  
2021 ◽  
Vol 13 (16) ◽  
pp. 2719
Author(s):  
Marissa A. Paglicawan ◽  
Carlo S. Emolaga ◽  
Johanna Marie B. Sudayon ◽  
Kenneth B. Tria
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Fiber Composites ◽  
Failure Behavior ◽  
Glass Fiber Composites ◽  
Transfer Method

The application of natural fiber-reinforced composites is gaining interest in the automotive, aerospace, construction, and marine fields due to its advantages of being environmentally friendly and lightweight, having a low cost, and having a lower energy consumption during production. The incorporation of natural fibers with glass fiber hybrid composites may lead to some engineering and industrial applications. In this study, abaca/glass fiber composites were prepared using the vacuum-assisted resin transfer method (VARTM). The effect of different lamination stacking sequences of abaca–glass fibers on the tensile, flexural, and impact properties was evaluated. The morphological failure behavior of the fractured-tensile property was evaluated by 3D X-ray Computed Tomography and Scanning Electron Microscopy (SEM). The results of mechanical properties were mainly dependent on the volume fraction of abaca fibers, glass fibers, and the arrangement of stacking sequences in the laminates. The higher volume fraction of abaca fiber resulted in a decrease in mechanical properties causing fiber fracture, resin cracking, and fiber pullout due to poor bonding between the fibers and the matrix. The addition of glass woven roving in the composites increased the mechanical properties despite the occurrence of severe delamination between the abaca–strand mat glass fiber.

scholarly journals Development and Testing of Pine Apple and Glass Fiber Reinforced Epoxy Hybrid Composites

2019 ◽  
Vol 8 (3) ◽  
pp. 2450-2453
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Glass Fiber Reinforced

Usage of Natural Fiber Composites (NFC) is increased rapidly due to the bio degradability nature of the fibers. These natural fibers are mixed with synthetic fibers to obtain better mechanical properties. In this study, pine apple and glass fiber reinforced epoxy composites are developed and their mechanical properties were evaluated. Composites were prepared by varying the fibers content and by using hand layup process with glass moulds of size 160 x 160 x 3 mm3 . The obtained laminates were sliced as per the ASTM criterion to test the properties. Higher glass fiber content in the composite specimen obtained higher mechanical properties. The composites can be utilized for the purpose of manufacturing components like doors panels, desks, roof tops etc.

MECHANICAL PROPERTIES OF SISAL/GLASS FIBER REINFORCED HYBRID COMPOSITES: A REVIEW

2018 ◽  
Vol 6 (2) ◽  
pp. 70-76
Author(s):  
Govind Pathak ◽  
Om Prakash Dubey ◽  
Prafful Kumar Manoharan
Keyword(s):  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Unsaturated Polyester ◽  
Industrial Applications ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Fundamental Research

The natural fiber-reinforced polymer composite is swiftly growing both in phrases of their industrial applications and fundamental research. They are renewable, cheap, absolutely or in part recyclable and biodegradable. The incorporation of herbal fibers consisting of sisal with glass fiber hybrid composites has additionally received growing industrial packages. Herbal and synthetic fibers are mixed in the same matrix (unsaturated polyester) to make sisal/glass fiber hybrid composites and the mechanical residences of those hybrid composites had been studied. A giant development in mechanical homes of sisal/glass fiber hybrid composites has been observed. the chalk powder (additive) is likewise introduced to the resin (unsaturated polyester) in proportions of 1%, 2%, 3% by way of weight of resin respectively and sisal/glass fiber hybrid composites were organized through the usage of this resin to take a look at the effect of chalk powder on mechanical homes of those hybrid composites. It is also found that because the chalk powder quantity increases tensile and flexural residences are decreases.

Effect of Reinforcements on Mechanical Properties of Nickel Alloy Hybrid Metal Matrix Composites Processed by Sand Mold Technique

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
Kumaraswamy Jayappa ◽  
Vijaya Kumar ◽  
Gange Gowda Purushotham
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Hybrid Composites ◽  
Research Work ◽  
Weight Percent ◽  
Matrix Composites ◽  
Hybrid Metal Matrix Composites ◽  
Ni Alloy

Hybrid Metal Matrix Composites (HMMCs) have gained wide applications in aerospace, marine, and domestic areas because of its significant properties relative to external forces and enabling environment. In present research work, Ni-alloy selected as a matrix and Al2O3 of 40–80 μm and TiO2 of 1–5 μm were selected as reinforcements. The composites were prepared by keeping 9 wt. % of TiO2 as unvarying and Al2O3 is varied from 3 weight % to 12 weight % in steps of 3 weight %. Induction furnace is used for the casting of composites and mixing is done by using mechanical stirring at 160 rpm for a time period of 5 min. The prepared composites are then tested for their tensile and hardness as per the ASTM standards. The Scanning Electron Microscopy was used for microstructural study. From experimentation, it was observed that increment in the weight percentage of Al2O3 with constant TiO2 increases the mechanical properties of hybrid composites and proper stirring improves homogeneity in the composite material. The test results show that the addition of Al2O3 up to 9 weight percent increases in tensile strength compared to Ni alloy and tensile strength slowly decreases with the addition of Al2O3 and that the hardness values are directly proportional to the weight percent of the addition of Al2O3 / TiO2.

Sign in / Sign up

Export Citation Format

Share Document