scholarly journals NOTIZEN. Weitere Verbindungen vom Typ A3NO3: K3NO3 und Rb3NO3 / Further Compounds Typ A3NO3: K3NO3 and Rb3NO3

1980 ◽  
Vol 35 (2) ◽  
pp. 237-238 ◽  
Author(s):  
Martin Jansen
Keyword(s):  
Solid State ◽  
Crystal Structures ◽  
Solid State Reaction ◽  
X Ray

Abstract K3NO3 and RbsNO3 were prepared by solid state reaction of equimolar mixtures of K2O/KNO2 and Rb20/RbN02, respectively. According to X-ray powder photographs their crystal structures are derived from the perovs-kite structure. K3NO3 is isostructural with Na3NO3 (a = 521.7 pm, Z = 1), Rb3NO3 represents a tetragonally distorted variant with a = 770.5, c = 550.8 pm and Z = 2.

Molecular Cocrystals of Carboxylic Acids. I. The Crystal Structures of the Adducts of Indole-3-acetic-Acid With Pyridin-2(1H)-one, 3,5-Dinitrobenzoic Acid and 1,3,5-Trinitrobenzene

1991 ◽  
Vol 44 (6) ◽  
pp. 809 ◽  
Author(s):  
DE Lynch ◽  
G Smith ◽  
KA Byriel ◽  
CHL Kennard
Keyword(s):  
Acetic Acid ◽  
Solid State ◽  
Crystal Structures ◽  
Benzene Ring ◽  
Solid State Reaction ◽  
Plant Hormone ◽  
Parent Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Indole 3 Acetic Acid

Three molecular cocrystal adducts of the plant hormone indole-3-acetic acid ( iaa ) have been prepared and their structures determined by X-ray diffraction. They are indole-3-acetic acid-bis [pyridin-2(1H)-one] (1), indole-3-acetic acid-3,5-dinitrobenzoic acid (2) and indole-3-acetic acid-1,3,5-trinitrobenzene (3). Complexes (2) and (3), which may be prepared in a solid-state reaction, are orange and are structurally similar, having significant π-π indole -benzene ring interactions. However, the colourless complex (1) shows no π-π ring interactions. In complex (2), the 3,5-dinitrobenzoic acid molecules form hydrogen-bonded cyclic dimers (O…O, 2.64 Ǻ), while in (3) the indole-3-acetic acid molecules form dimers (O…O, 2.66 Ǻ). This feature contrasts with the structure of adduct (1) in which the pyridin-2(1H)-one molecules exist as dimers [N…O, 2.79, 2.74 Ǻ] analogous to those found in the parent compound.

X-ray Structure Refinement and Vibrational Spectroscopy of Ca8Gd2 (PO4)6 O2

2013 ◽  
Vol 12 (10) ◽  
pp. 719-726
Author(s):  
R. Ayadi ◽  
Mohamed Boujelbene ◽  
T. Mhiri
Keyword(s):  
Solid State ◽  
General Formula ◽  
Vibrational Spectroscopy ◽  
Powder Diffraction ◽  
Infrared Spectra ◽  
Solid State Reaction ◽  
Structure Refinement ◽  
Unit Cell ◽  
Cell Group ◽  
X Ray

The present paper is interested in the study of compounds from the apatite family with the general formula Ca10 (PO4)6A2. It particularly brings to light the exploitation of the distinctive stereochemistries of two Ca positions in apatite. In fact, Gd-Bearing oxyapatiteCa8 Gd2 (PO4)6O2 has been synthesized by solid state reaction and characterized by X-ray powder diffraction. The site occupancies of substituents is0.3333 in Gd and 0.3333 for Ca in the Ca(1) position and 0. 5 for Gd in the Ca (2) position.  Besides, the observed frequencies in the Raman and infrared spectra were explained and discussed on the basis of unit-cell group analyses.

Bis(1-phenyl-1-propyne) complexes of tungsten(II): crystal structures of [WI2(CO)(NCR)(η2-MeC2Ph)2] (R = Me, Et, or Ph)

2001 ◽  
Vol 79 (3) ◽  
pp. 263-271
Author(s):  
Paul K Baker ◽  
Michael GB Drew ◽  
Deborah S Evans
Keyword(s):  
Carbon Monoxide ◽  
Solid State ◽  
Crystal Structures ◽  
Octahedral Geometry ◽  
X Ray ◽  
X Ray Crystallography ◽  
Alkyne Complexes ◽  
First Time

Reaction of [WI2(CO)3(NCMe)2] with two equivalents of 1-phenyl-1-propyne (MeC2Ph) in CH2Cl2, and in the absence of light, gave the bis(1-phenyl-1-propyne) complex [WI2(CO)(NCMe)(η2-MeC2Ph)2] (1) in 77% yield. Treatment of equimolar quantities of 1 and NCR (R = Et, i-Pr, t-Bu, Ph) in CH2Cl2 afforded the nitrile-exchanged products, [WI2(CO)(NCR)(η2-MeC2Ph)2] (2-5) (R = Et (2), i-Pr (3), t-Bu (4), Ph (5)). Complexes 1, 2, and 5 were structurally characterized by X-ray crystallography. All three structures have the same pseudo-octahedral geometry, with the equatorial sites being occupied by cis and parallel alkyne groups, which are trans to the cis-iodo groups. The trans carbon monoxide and acetonitrile ligands occupy the axial sites. In structures 1 and 2, the methyl and phenyl substituents of the 1-phenyl-1-propyne ligands are cis to each other, whereas for the bulkier NCPh complex (5), the methyl and phenyl groups are trans to one another. This is the first time that this arrangement has been observed in the solid state in bis(alkyne) complexes of this type.Key words: bis(1-phenyl-1-propyne), carbonyl, nitrile, diiodo, tungsten(II), crystal structures.

Preparation of Ultra–Fine La3NbO7 Powder by Solid State Reaction

2012 ◽  
Vol 512-515 ◽  
pp. 158-161 ◽  
Author(s):  
Ling Dai ◽  
Qiang Xu ◽  
Shi Zhen Zhu ◽  
Ling Liu
Keyword(s):  
Solid State ◽  
Solid State Reaction ◽  
Single Phase ◽  
Thermal Barrier ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granular Particle ◽  
Fine Particle Size ◽  
Ultra Fine Particle ◽  
Different Temperatures

As a new candidate material for the ceramic layer in thermal barrier coatings (TBCs) system, La3NbO7 was synthesized with La2O3 powder and Nb2O5 powder by solid state reaction. The stating powders with a mole ratio of La to Nb of 3:1 were mixed and then the mixture was calcined under the different temperatures(800°C, 1000°C, 1200°C) and dwell times(2h, 6h, 10h). The phase structure of the powder was observed by X–ray diffraction(XRD), and the microstructure of the sample was observed by scanning electron microscope(SEM). The effect of calcination temperature and dwell Time on the phase formation were examined. The results indicate that the La3NbO7 powder with single phase can be synthesized successfully at 1200°C for 10h in air, and the La3NbOsub>7 powders synthesized have an ultra-fine particle size of 0.5˜1µm with a granular particle shape. With the temperature increasing, LaNbO4/sub> was synthesized firstly and then La3NbO7 was synthesized with a mole ratio of La2O3 to LaNbO4 of 1:1.

SYNTHESIS, MORPHOLOGY AND STRUCTURAL PROPERTIES OF (GD,ND)SR2RUCU2O8 SAMPLES

2003 ◽  
Vol 17 (04n06) ◽  
pp. 899-904 ◽  
Author(s):  
A. VECCHIONE ◽  
M. GOMBOS ◽  
C. TEDESCO ◽  
A. IMMIRZI ◽  
L. MARCHESE ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Solid State ◽  
Powder Diffraction ◽  
Solid State Reaction ◽  
X Ray ◽  
Structure And Morphology ◽  
Polycrystalline Powder ◽  
Scanning Electron

NdSr 2 RuCu 2 O x material has been prepared as polycrystalline powder by solid state reaction. The compound has been investigated by synchrotron x-ray powder diffraction and scanning electron microscopy. The experimental results show that the average crystal structure is a disordered cubic perovskite with Nd and Sr cations occupying the same site and the same substitution is found for Cu and Ru atoms. A comparison between the crystal structure and morphology of this compound and the superconducting tetragonal GdSr 2 RuCu 2 O 8 is also discussed.

Thermal enhancement of 2H11/2→4I15/2 up-conversion luminescence of Er3+ doped K2Yb(PO4)(MoO4) phosphors

2021 ◽  
Author(s):  
Hongqiang Cui ◽  
Yongze Cao ◽  
Lei Zhang ◽  
Yuhang Zhang ◽  
Siying Ran ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
Orthorhombic Crystal Structure ◽  
Reaction Method ◽  
X Ray ◽  
Thermal Enhancement

Er3+ with different concentrations doped K2Yb(PO4)(MoO4) phosphors were prepared by a solid-state reaction method, and the layered orthorhombic crystal structure of the samples was confirmed by X-ray diffraction (XRD). Under...

Changes in Crystallite Size of Tricalcium Silicate during the Laboratory Grinding

2021 ◽  
Vol 321 ◽  
pp. 23-27
Author(s):  
Simona Ravaszová ◽  
Karel Dvořák
Keyword(s):  
Solid State ◽  
Crystallite Size ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
Tricalcium Silicate ◽  
Planetary Mill ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Grinding Time

The paper is focused on one of the most important component of Portland clinker-on the tricalcium silicate. The study reported in this article is focuses on the changes in crystallite size of synthetic tricalcium silicate obtained using solid state reaction method. Crystallite size changes are monitored during the grinding in three types of laboratory mills in two different conditions. Changing in crystallite size at various grinding time up to 120 minutes are studied with the aid of X-ray diffraction and using the Scherrer equation. It has been found that the most efficient laboratory mill in terms of speed and fineness of the material was the planetary mill.

Karakterisasi Kekristalan dan Konstanta Dielektrik Barium Stronsium Titanat (BaxSr1-XTiO3) dengan Variasi Komposisi Barium Dan Stronsium Yang Dibuat Menggunakan Metode Solid State Reaction

2019 ◽  
Vol 4 (4) ◽  
Author(s):  
Alpi Zaidah
Keyword(s):  
Solid State ◽  
Solid State Reaction ◽  
Holding Time ◽  
X Ray Diffraction ◽  
X Ray

Pembuatan sampel barium stronsium titanat (BaxSr1-xTiO3) telah dilakukan dengan metode solid state reaction. Variasi komposisi mol Ba(x) untuk pembuatan sampel adalah x=0,4;0,3 dan 0,2. Sampel di-sintering pada suhu 1100oC dengan holding time 2 jam. Karakterisasi sampel dilakukan menggunakan peralatan X-Ray Diffraction (XRD) untuk mengetahui tingkat kekristalan dan ukuran kristal dari sampel. Sedangkan untuk mengetahui besarnya konstanta dielektrik menggunakan RLC-Meter.  Berdasarkan analisa dengan software GSAS, parameter kisi BaxSr1-xTiO3 yang sintering pada suhu 1100°C untuk x=0,4 adalah a=b=c=3,947 nm. Parameter kisi a=b=c=3,947 nm untuk x=0,3, dan parameter kisi a=b=c=3,939 nm untuk x=0,2. Nilai parameter kisi a=b=c menunjukkan struktur kristal berbentuk kubik. Ukuran kristal berturut-turut untuk x=0,4;0,3 dan 0,2 adalah 65 nm, 66 nm dan 69 nm. Ukuran kristal semakin besar seiring dengan meningkatnya penambahan Sr. Pengukuran konstanta dielektrik (K) dilakukan pada rentang frekuensi 1 kHz. Nilai K sampel dengan x=0,4;0,3 dan 0,2 masing-masing sebesar 265, 277 dan 307.

scholarly journals Ab initio computation for solid-state 31P NMR of inorganic phosphates: revisiting X-ray structures

2019 ◽  
Vol 21 (19) ◽  
pp. 10070-10074 ◽  
Author(s):  
Kartik Pilar ◽  
Zeyu Deng ◽  
Molleigh B. Preefer ◽  
Joya A. Cooley ◽  
Raphaële Clément ◽  
...  
Keyword(s):  
Solid State ◽  
Chemical Shift ◽  
Ab Initio ◽  
Crystal Structures ◽  
31P Nmr ◽  
Geometry Optimization ◽  
Chemical Shift Tensors ◽  
X Ray ◽  
Ab Initio Computation ◽  
Inorganic Phosphates

The complete 31P NMR chemical shift tensors for 22 inorganic phosphates obtained from ab initio computation are found to correspond closely to experimentally obtained parameters. The cases where correspondence is significantly improved upon geometry optimization point to the crystal structures requiring correction.

Sign in / Sign up

Export Citation Format

Share Document