Freeze-Thaw Durability of Nonair-Entrained High Strength Concretes Containing Superplasticizers

2009 ◽  
pp. 509-509-11
Author(s):  
SM Khalil ◽  
MA Ward ◽  
DR Morgan
Keyword(s):  
High Strength ◽  
Freeze Thaw

Performance Deterioration of High Strength Concrete under Mixed Erosion and Freeze-Thaw Cycling

2010 ◽  
Vol 163-167 ◽  
pp. 1655-1660
Author(s):  
Jian Zhang ◽  
Bo Diao ◽  
Xiao Ning Zheng ◽  
Yan Dong Li
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Mass Loss ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
High Strength Concrete ◽  
High Strength ◽  
Freeze Thaw ◽  
Strength Concrete ◽  
Dynamic Modulus Of Elasticity

The mechanical properties of high strength concrete(HSC) were experimentally investigated under mixed erosion and freeze-thaw cycling according to ASTM C666(Procedure B), the erosion solution was mixed by weight of 3% sodium chloride and 5% sodium sulfate. The mass loss, relative dynamic modulus of elasticity, compressive strength, elastic modulus and other relative data were measured. The results showed that with the increasing number of freeze-thaw cycles, the surface scaled more seriously; the mass loss, compressive strength and elastic modulus continued to decrease; the relative dynamic modulus of elasticity increased slightly in the first 225 freeze-thaw cycles, then decreased in the following 75 cycles; the corresponding strain to peak stress decreased with the increase of freeze-thaw cycles. After 200 cycles, the rate of deterioration of concrete accelerated obviously.

scholarly journals Freeze-Thaw Resistance of Normal and High Strength Concretes Produced with Fly Ash and Silica Fume

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Cenk Karakurt ◽  
Yıldırım Bayazıt
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
High Strength ◽  
Unit Surface Area ◽  
Normal Strength Concrete ◽  
Freeze Thaw ◽  
Strength Concrete ◽  
Thaw Cycle ◽  
Surface Scaling ◽  
Normal Strength

This study is based on determination of the freeze-thaw resistance of air-entrained and non-air-entrained normal strength concrete (NC) and high strength concrete (HSC) produced with fly ash and silica fume according to surface scaling. The procedure allows us to measure the amount of scaling per unit surface area due to a number of well defined freezing and thawing cycles in the presence of deicing salt. The weight loss, surface scaling, moisture uptake, and internal damage were measured after 0 and after every 4th freeze-thaw cycle. The test results showed that the freeze-thaw resistance is influenced directly by the compressive strength property of the concrete. Silica fume significantly reduced the resistance of normal strength concrete against freeze-thaw effect without plasticizing agent. The surface scaling of silica fume concrete without admixture was 22% higher than reference normal concrete.

Material Properties of Ultra - High Performance Concrete in Extreme Conditions

2016 ◽  
Vol 711 ◽  
pp. 157-162 ◽  
Author(s):  
David Citek ◽  
Milan Rydval ◽  
Stanislav Rehacek ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Material Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Accurate Information ◽  
Extreme Conditions ◽  
Ultra High Performance Concrete ◽  
Freeze Thaw

The Ultra High Performance Concrete (UHPC) is a very promising material suitable for application in special structures. However, the knowledge of performance of this relatively new material is rather limited. The exceptional mechanical properties of UHPC allow for a modification of the design rules, which are applicable in ordinary or high strength concrete. This paper deals in more detail with impact of thermal stress on bond properties between prestressing strands and UHPC and an influence of high temperature to final material properties of different UHPC mixtures. Specimens in the first experimental part were subjected to the cycling freeze-thaw testing. The relationship between bond behavior of both type of material (UHPC and ordinary concrete) and effect of cycling freeze-thaw tests was investigated. The second part of experimental work was focused on mechanical properties of UHPC exposure to the high temperature (Tmax = 200°C to Tmax = 1000°C). Tested mechanical properties were compressive and flexural strengths, the fracture properties will be presented in the next paper. The obtained experimental data serve as a basis for further systematic experimental verification and more accurate information about the significantly higher material properties of UHP(FR)C and its behavior in extreme conditions.

scholarly journals Thermal Properties of Conventional and High-strength Concrete

2018 ◽  
Vol 245 ◽  
pp. 06005 ◽  
Author(s):  
Tatiana Musorina ◽  
Alexsander Katcay ◽  
Mikhail Petrichenko ◽  
Anna Selezneva
Keyword(s):  
Thermal Properties ◽  
Thermophysical Properties ◽  
High Strength Concrete ◽  
High Strength ◽  
Temperature Fluctuations ◽  
Conventional Concrete ◽  
Freeze Thaw ◽  
Strength Concrete ◽  
Concrete Properties ◽  
Cold Chamber

Important characteristics for the Nordic countries: a freeze-thaw resistance and an ability of a material to keep heat inside the building. This paper aims to define the thermophysical properties of a high-strength concrete, compare the discovered performance with the conventional concrete properties. With this object in mind two experiments in cold chamber “CHALLENGE 250” have been conducted and followed by analysis. In these experiments, the insulation of facades is beyond the framework of the investigation. Only the thermophysical properties of concrete are taken into account. The samples were affected by temperature fluctuations. Results from the experiments show that strength characteristics of a material are in indirect ratio to accumulation properties of a structure. This conclusion is directly related to porosity of material and additives. During 70 minutes, with outside temperature being below zero, the temperature inside the concrete dropped to an average. As the outside temperature increases significantly to more than zero, the temperature inside the concrete has become below average (continued to decline) in 70 minutes. The more strength of material, the better thermophysical properties. High-strength concrete is less susceptible to temperature fluctuations, therefore more heat-resistant. As mentioned in the paper below, the material has one disadvantage: this is a large cost per cubic meter.

Qualities of High-Strength Lightweight Concrete Used for Construction of Arctic Offshore Platform

1990 ◽  
Vol 112 (1) ◽  
pp. 27-34 ◽  
Author(s):  
D. Tachibana ◽  
M. Imai ◽  
T. Okada
Keyword(s):  
Arctic Ocean ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
High Strength ◽  
The Arctic ◽  
Oil Exploration ◽  
Freezing And Thawing ◽  
Freeze Thaw ◽  
The Arctic Ocean ◽  
Exploration And Production

Concrete employed in oil exploration and production platforms for use in shallow offshore zones of the Arctic Ocean is required to be lightweight, yet high strength, and moreover possess adequate resistance to freezing and thawing. Generally speaking, lightweight concrete, using artificial lightweight aggregate, has lower freeze-thaw resistance and this presents a serious problem. The study reported here was carried out on the freeze-thaw durability, constructibility and other properties of high-strength lightweight concrete. This paper especially points out the governing factors influenzing freeze-thaw durability of this type of concrete and describes a method of manufacturing concrete possessing superior durability.

Sign in / Sign up

Export Citation Format

Share Document