scholarly journals Creation of Wood Dust during Wood Processing: Size Analysis, Dust Separation, and Occupational Health

BioResources ◽  
2015 ◽  
Vol 11 (1) ◽  
Author(s):  
Eva Mračková ◽  
Ľuboš Krišťák ◽  
Martin Kučerka ◽  
Milan Gaff ◽  
Milada Gajtanska
2016 ◽  
Vol 688 ◽  
pp. 182-189 ◽  
Author(s):  
Eva Mračková ◽  
Ivana Tureková

The article is dealing with wood dust particle size problem in consideration of their fire and explosion. The aim of the thesis is statistical evaluation of wooden particles of Palisander (Jacaranda Mimosifolia) and Oak (Quercus robur L.). The samples were taken from the operation of the production furniture, in which dust is formed during the technology. Measurement was carried out by laser analyzer. Measurements were carried out on samples in specific time interval. Values, which were acquired, were evaluated of characteristics of the Weibull Distribution and treated in statistical program. It has been found by means of measurement and evaluation that sample of Palisander (Jacaranda Mimosifolia) has finer grain than sample of Oak (Quercus robur L.), therefore the has greater assumption to the creation of fire and explosions in process at the wood processing. We note in comparison with other sizes of wood particles, that the percentages are comparable.


2015 ◽  
Vol 5 (2) ◽  
Author(s):  
Aca Bozilov ◽  
Nenad Zivkovic ◽  
Dusica Pesic ◽  
Nikola Misic ◽  
Bojan Bijelic

Industrial activities have to comply with protective measures. For this reason, it is essential to know the maximum allowable concentration of chemical hazards (gas, steam and dust) which can occur in the workplace. In wood industry, a large amount of wood dust is produced during the mechanical wood processing. Unless adequate measures for its removal are undertaken, there may be potential hazards for the workers’ health. The research has been carried out for purpose of determining the level of dust emission in different machines in wood processing workshops with no de-dusting system included, by measuring concentrations of wood dust produced during the processing of wooden material. Key words: wood processing, wood dust, concentration measuring


Author(s):  
KARIN REINHOLD ◽  
PIIA TINT ◽  
GUNNAR KIIVET

The working conditions in textile and wood processing industries have been investigated using a simple risk assessment method and questionnaires worked out for the purpose. A simple/flexible risk assessment method (beginning with a two-stage model that could be enlarged into a six-stage model) is worked out by the authors (Tint & Kiivet) and the implementation possibilities are presented. It is necessary to increase interest from the side of employers for using the method and analyzing the work environment with the aim of improvement implementations. The main complaints in textile industry are high temperature in the workroom, bad ventilation, intense work and the dependence of workers' work results from the others. The main risk factors in wood processing industry are hazardous tools and equipment, also heavy physical load, noise, wood dust and odors of chemicals originating from polishes.


2020 ◽  
Vol 40 (1) ◽  
pp. 33-38
Author(s):  
Jubilette Windy Hutabarat ◽  
Nuryunita Nainggolan ◽  
Amira Permatasari Tarigan ◽  
Putri Eyanoer

Backgrounds: Wood dust exposure can stimulate proinflammatory cytokines and increase IL-8 levels, which is a foreign body in the body will be phagocytosis by macrophages and excrete mediators such as chemokines, cytokines, and chemoattractants which can cause inflammation. Duration of exposure, number and size of wood dust in the respiratory tract of wood industry workers are associated with various pulmonary disorders such as, COPD, occupational asthma, allergic rhinitis, decreased pulmonary function and pulmonary fibrosis. The aim this study is determine correlation between wood dust levels with interleukin-8 in blood serum among wood processing workers at x company, Tanjung Morawa-North Sumatera. Methods: A cross-sectional study which involved 40 workers from 3 different locations namely cutting, sanding and drafting. Cumulative wood dust exposure was calculated by measuring the dust content at the work site using Dusttrak TSI. IL-8 serum levels were measured using the ELISA technique. The Spearman correlation test was used. Results: Out of 40 workers those who worked in the cutting section were 15 people (37,5%), sanding section were 15 people (37,5%) and drafting section were 10 people (25%). The average level of wood dust PM 2,5 was 5,23 mg/m3while PM10 was 8,24 mg/m3 and the mean level of IL-8 in serum was 163,3 ng/L. This study find that there is a strong correlation between wood dust and IL-8 serum (r = 0,683; p


2021 ◽  
Vol 9 (E) ◽  
pp. 317-323
Author(s):  
Eko Prasetyo ◽  
Anies Anies ◽  
Nyoman Suci Widyastiti ◽  
Suhartono Suhartono

AIM: This study is a preliminary study to analyze the etiology and pathophysiology of exposure to wood dust and diisocyanates in the wood processing industry in Jepara, Central Java, Indonesia. This study also provides a diagnostic evaluation of occupational asthma (OA) for ongoing exposure. METHODS: The research method was carried out with a systematic review of various previous findings and with a preliminary study of workers in the processing industry in Jepara, Indonesia. RESULTS: The results show that from a sample of 32 respondents who have been carried out in a wood processing factory in Jepara, it shows that the suspect OA in sanding workers by hand is 75%, with the distribution of signs and symptoms: Chest tightness and pain (90%); cough (53%); shortness of breath (50%); and wheezing (2%). From the signs and symptoms felt, workers felt a continuous increase (progressivity) of OA by 75%. CONCLUSION: Theoretically, this preliminary study is useful to provide information about exposure to wood dust and diisocyanates as a risk factor for OA, especially among workers in the wood industry.


2021 ◽  
Vol 8 (E) ◽  
pp. 317-323
Author(s):  
Eko Prasetyo ◽  
Anies Anies ◽  
Nyoman Suci Widyastiti ◽  
Suhartono Suhartono

AIM: This study is a preliminary study to analyze the etiology and pathophysiology of exposure to wood dust and diisocyanates in the wood processing industry in Jepara, Central Java, Indonesia. This study also provides a diagnostic evaluation of occupational asthma (OA) for ongoing exposure. METHODS: The research method was carried out with a systematic review of various previous findings and with a preliminary study of workers in the processing industry in Jepara, Indonesia. RESULTS: The results show that from a sample of 32 respondents who have been carried out in a wood processing factory in Jepara, it shows that the suspect OA in sanding workers by hand is 75%, with the distribution of signs and symptoms: Chest tightness and pain (90%); cough (53%); shortness of breath (50%); and wheezing (2%). From the signs and symptoms felt, workers felt a continuous increase (progressivity) of OA by 75%. CONCLUSION: Theoretically, this preliminary study is useful to provide information about exposure to wood dust and diisocyanates as a risk factor for OA, especially among workers in the wood industry.


Author(s):  
Angelina Wójcik-Fatla ◽  
Barbara Mackiewicz ◽  
Anna Sawczyn-Domańska ◽  
Jacek Sroka ◽  
Jan Siwiec ◽  
...  

Abstract Occurrence Gram-negative bacteria occur commonly in the inner tissues of stored coniferous and deciduous timber, showing a marked variation in numbers. The greatest maximal numbers are found in the sapwood of coniferous timber. The common constituents of the Gram-negative biota are potentially pathogenic species of Enterobacteriaceae family of the genera Rahnella, Pantoea, Enterobacter, and Klebsiella. The air of wood-processing facilities is polluted with the wood-borne Gram-negative bacteria and produced by them endotoxin, as demonstrated worldwide by numerous studies. Effects There are three potential pathways of the pathogenic impact of wood-borne Gram-negative bacteria on exposed woodworkers: allergic, immunotoxic, and infectious. Allergic impact has been underestimated for a long time with relation to Gram-negative bacteria. Hopefully, the recent demonstration of the first documented case of hypersensitivity pneumonitis (HP) in woodworkers caused by Pantoea agglomerans which developed in extremely large quantities in birch sapwood, would speed up finding of new wood-related cases of HP caused by Gram-negative bacteria. The second pathway is associated with endotoxin, exerting strong immunotoxic (excessively immunostimulative) action. It has been demonstrated that endotoxin is released into wood dust in the form of nano-sized microvesicles, by peeling off the outer membrane of bacteria. Endotoxin microvesicles are easily inhaled by humans together with dust because of small dimensions and aerodynamic shape. Afterwards, they cause a nonspecific activation of lung macrophages, which release numerous inflammatory mediators causing an inflammatory lung reaction, chest tightness, fever, gas exchange disorders, and bronchospasm, without radiographic changes. The resulting disease is known as “Organic Dust Toxic Syndrome” or “toxic pneumonitis.” The potential third pathway of pathogenic impact is infection. The suspected species is Klebsiella pneumoniae that may occur commonly in wood dust; however, until now this pathway has not been confirmed. Conclusion Summarizing, Gram-negative bacteria-inhabiting timber should be considered, besides filamentous fungi and actinobacteria, as important risk factors of occupational disease in woodworkers that could be either HP with allergenic background or toxic pneumonitis elicited by endotoxin.


2017 ◽  
Vol 755 ◽  
pp. 38-43 ◽  
Author(s):  
Miroslava Vandlíčková ◽  
Jozef Vraniak

The development of the new technologies has also brought new possibilities of the wood processing, wood shaping and wood materials tending. By reason of increased human need for wood products the industry has shifted from the production in the workshops throught manufactures up to fabrications. This fact also causes increasing of the wood dust amount in the spaces of the production shops or halls, and by that also increased danger of the explosion of the wood dust. At the adequate initiatory source, sufficient amount of flammable material, oxidant and essential pressure, the explosion can occur and last for several miliseconds, therefore people rescue in the endangered spaces in case of explosion is impossible. One of the parameters which influence properties of the flammable wood dust is its particle size. The article deals with the particle size influence of the wood dust at its minimal temperature of ignition in the stired state. On the basis of the experimental measures the influence of the minimal action of the thermal energy for the activation of the ignition process of the wood dust in the stired state at the reacting of pressure and variousness of grit size is assessed.


Sign in / Sign up

Export Citation Format

Share Document