scholarly journals Pencitraan radiologik CT-scan sebagai alat screening pasien untuk pemasangan implan gigi Radiologic imaging of CT-scan as a screener for patients in placing dental implant

2012 ◽  
Vol 11 (1) ◽  
pp. 49
Author(s):  
Barunawaty Yunus ◽  
Syamsiar Toppo
Keyword(s):  
Treatment Failure ◽  
Ct Scan ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Hounsfield Unit ◽  
Local Condition ◽  
The Public ◽  
Implant Placement ◽  
Radiologic Imaging ◽  
Implant Treatment

The success of dental implant installment is determined by the condition of alveolar bone itself. Although there is nolegal research of the dental implant treatment failure in Indonesia, but there are some reports which state that thereis a lot of dental implant treatment failure happened which caused by the lack of appraisal of the quality andquantity of the alveolar bone image which is accurate and optimal in the usement of radioghraphy units. But as thetime goes, the public needed of dental implant treatment begins increased. The purpose of this paper is to introducethe CT-Scan with Hounsfield Unit sofe ware as a screener to patients for dental implant placement with value bonemineral density (BMD). The measurement of BMD on alveolar bone before surgery for dental implant installmentmust describe local condition and then compared the size with the diameter of dental implant. From the discussion,it can be concluded that with using the CT-Scan, somebody can be stated get requirement or not for dental implantplacement.

scholarly journals Pemanfaatan hounsfield unit pada CT-scan dalam menentukan kepadatan tulang rahang untuk pemasangan implan gigi

2010 ◽  
Vol 9 (1) ◽  
pp. 34
Author(s):  
Barunawaty Yunus ◽  
Bachtiar Murtala
Keyword(s):  
Ct Scan ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Hounsfield Unit ◽  
High Class ◽  
Treatment Assessment ◽  
The Past

In the past, dental implant (DI)treatment is still an exclusive treatment can only beachieved by high class people due to unaffordable cost. However, nowadays thedemand of DI become increasing. The success of DI insertion is determined by thecondition of alveolar bone itself. Although there is no studies of DI treatment failurein Indonesia, there are some reports studied failure of DI treatment assessment whichcould be caused by the lack of quality and quantity of the alveolar bone radiographyimage. The purpose of this article was to introduce the benefit of hounsfield unit at theCT-Scan in supporting assessment of alveolar bone compactness for DI insertion. Itcan be concluded that the use of hounsfield unit at the CT-Scan can provide theclinician in determining the alveolar bone compactness prior to the DI treatment thatcan decrease the failure to occur.

scholarly journals Evaluation of Bone Healing Following Immediate and Delayed Dental Implant Placement

2009 ◽  
Vol 10 (4) ◽  
pp. 35-42 ◽  
Author(s):  
Luay Younis ◽  
Asraa Taher ◽  
Mohamed Ibrahim Abu-Hassan ◽  
Ong Tin
Keyword(s):  
Dental Implant ◽  
Bone Healing ◽  
Alveolar Bone ◽  
Operating Time ◽  
Computer Software ◽  
Implant Placement ◽  
Anterior Teeth ◽  
The Mean ◽  
Titanium Dental Implants ◽  
Implant Treatment

Abstract Aim The purpose of this study was to compare bone healing and coronal bone remodeling following both immediate and delayed placement of titanium dental implants in extraction sockets. Methods and Materials The study included 49 patients (28 women, 21 men) in need of implant treatment in the anterior teeth region of either the maxilla or mandible. Twenty-three subjects received 37 immediate (Im) implants and 26 subjects received 37 delayed (De) implants. The implants were placed immediately in the alveoli following the extraction in the Im group and the implants in the De group were placed approximately six months following the extractions. The width and depth of the marginal bone defects mesial and distal to the implants were evaluated radiographically using computer software designed to measure distances in digitized radiographs. The mean reduction of bone defect over time was 48% (from 3.4 to 1.3 mm) in the Im group which was statistically significant (P <0.05) when tested using a sample t-test, while the mean reduction was 17% (from 2.1 to 1.9 mm) in the De group. Conclusion The potential exists for bone healing and remodeling in fresh extraction socket defects associated with immediately placed implants. Clinical Significance Im implantation offers the advantages of reduced operating time and the preservation of alveolar bone volume. Citation Younis L, Taher A, Abu-Hassan MI, Tin O. Evaluation of Bone Healing Following Immediate and Delayed Dental Implant Placement. J Contemp Dent Pract 2009 July; (10)4:035-042.

“THE PROSTHODONTIC TREATMENT OF UNFAVOURABLE POSITIONED IMPLANT IN ANTERIOR MAXILLA”- A CASE REPORT.

2021 ◽  
pp. 29-30
Author(s):  
Deepika Sharma ◽  
Tarun Gaur ◽  
Karunakaran Keshav
Keyword(s):  
Case Report ◽  
Dental Implant ◽  
Treatment Option ◽  
Successful Treatment ◽  
Bone Thickness ◽  
Facial Bone ◽  
Anterior Maxilla ◽  
Implant Placement ◽  
Good Treatment Option ◽  
Implant Treatment

With the advancement in the dental implant treatment, many new innovative improvements have been developed in the designs and components of implants. These improvements helps to handle the compromising situations where sometimes the good treatment option can become more challenging. One of the such grueling condition is implant placement in the anterior maxilla where dentist has to fulll both aesthetic and functional demand. Many aesthetic failures of implant have been reported in the literature in the anterior maxilla. One of them is placing implant in sites with deciency of facial bone thickness which sometimes resulted in malposition of implant. This case report discusses about the prosthodontic correction of malpositioned implant in the anterior maxilla by using castable abutment. The use of castable abutment is concluded as successful treatment option for complex misaligned and malposed single dental implant.

scholarly journals New Implant Design with Midcrestal and Apical Wing Thread for Increased Implant Stability in Single Postextraction Maxillary Implant

2019 ◽  
Vol 2019 ◽  
pp. 1-4 ◽  
Author(s):  
Antonio Scarano ◽  
Bartolomeo Assenza ◽  
Francesco Inchingolo ◽  
Filiberto Mastrangelo ◽  
Felice Lorusso
Keyword(s):  
Cortical Bone ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Primary Stability ◽  
Implant Design ◽  
Insertion Torque ◽  
Fixture Design ◽  
Implant Stability ◽  
Implant Placement ◽  
Immediate Placement

Background. The immediate placement of a dental implant could represent an option treatment for the rehabilitation of a postextractive missing tooth socket to replace compromised or untreatable teeth, with the advantage of single-session surgery. In this way, the anatomy of the alveolar bone defect, the preservation of the buccal cortical bone, and the primary stability of the fixture represent the critical factors that consent a precise implant placement. Objective. This case report describes a novel fixture design for postextractive alveolar socket immediate implant. Methods. Two patients (25 and 31 years old) were treated for postextractive dental implant placement to replace both central upper incisor teeth with four implants. The residual bone implant gap was not filled with graft or bone substitute. The restoration was provided following a standard loading protocol by a cement-sealed prosthetic abutment. Results. Clinically, all implants positioned showed an excellent insertion torque. No postoperative complications were reported. At 6 months of healing, the buccal cortical bone and the implant stability were present and well maintained. Conclusion. The evidence of this study allows us to underline the possible advantages of this new fixture design for postextractive implant technique.

Successful Dental Implant Placement Surgeries With Buccal Bone Fenestrations

2015 ◽  
Vol 41 (1) ◽  
pp. 112-118 ◽  
Author(s):  
Liviu Steier ◽  
Gabriela Steier
Keyword(s):  
Treatment Outcomes ◽  
Dental Implant ◽  
Bone Plate ◽  
Comprehensive Review ◽  
Preventative Measures ◽  
Implant Placement ◽  
Success Criteria ◽  
Implant Treatment

This is the first comprehensive review of the classification, preventative measures, diagnosis, treatment methods, and determination of success criteria of buccal bone plate fenestrations (BPFs) secondary to posterior implant surgeries. The purpose of this review is to present and discuss the current literature from peer-reviewed journals, recent studies, and international implantology guidelines and to provide practitioners with guiding points to identify and understand whether BPFs are complications or accidents of implant surgeries. In addition, this review sets forth a detailed set of criteria for the evaluation and diagnosis of BPFs and for the subsequent classification of BPFs as either complications or accidents of posterior implant surgeries. From the literature analyzed, it is clear that BPFs are disqualified from the class of implant treatment failures because BPFs neither impair nor significantly delay treatment. A comprehensive outline of preventative measures and surgery aids to avoid fenestrating the buccal bone plate during implant placement, and a variety of repair methods are included in this review. Considerations of treatment outcomes and patient sensitivities are also included in this comprehensive review.

scholarly journals Preservation or reconstruction of the Peri-implant bone- A Review

2021 ◽  
Vol 5 (3) ◽  
pp. 144-146
Author(s):  
Shamila Shetty K ◽  
◽  
R.K Nishith ◽  
R.K Nishith ◽  
Misha Rose Mathew ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Alveolar Ridge ◽  
Missing Teeth ◽  
Implant Placement ◽  
Biophysical Process ◽  
Implant Therapy ◽  
Teeth Extraction

The main biological and biophysical process that has made dental implant therapy predictably successful for replacing missing teeth is Osseointegration. Teeth extraction is done for several purposes, often without any consideration for the preservation of the alveolar ridge. Alveolar bone post-extraction changes have been estimated to cause a 50% decrease in alveolar bone buccolingual width, and a further loss in height. This review will go through various techniques of ARP and bone regeneration techniques and explore the best way to obtain the best outcomes after implant placement.

scholarly journals Histological Evaluation of Alveolar Bone Ridge for Dental Implant Placement Using a Nondecalcified Frozen Section Technique

2017 ◽  
Vol 26 (1) ◽  
pp. 61-66 ◽  
Author(s):  
Yasuko Takahashi ◽  
Miwa Kanou ◽  
Yuichi Ito ◽  
Michi Ohmori ◽  
Kayoko Yamamoto ◽  
...  
Keyword(s):  
Dental Implant ◽  
Alveolar Bone ◽  
Frozen Section ◽  
Histological Evaluation ◽  
Implant Placement ◽  
Section Technique

scholarly journals Alveolar Bone Augmentation

2014 ◽  
Vol 614 ◽  
pp. 89-94 ◽  
Author(s):  
Cena Dimova ◽  
Kiro Papakoca ◽  
Velko Papakoca
Keyword(s):  
Dental Implant ◽  
Tooth Extraction ◽  
Alveolar Bone ◽  
Bone Volume ◽  
The Body ◽  
Surgical Reconstruction ◽  
Bone Augmentation ◽  
Alveolar Ridge Augmentation ◽  
Ridge Augmentation ◽  
Implant Placement

Bones and teeth are the only structureswithin the body where calciumandphosphate participate asfunctional pillars. Despite their mineralnature, both organs are vital and dynamic. The aim was to remark the indications for alveolar augmentation after tooth extraction and prior the placement of endoosseous dental implants. The autograft, allograft, alloplast, and xenograftmaterials all have reported success, alone or in combination,for particulate bone augmentation. Theparticulate autograft is the gold standard for mostcraniofacial bone grafting, including the treatmentof dental implant–related defects. Advantages of alveolar ridge augmentation with sufficient bone volume to adjust for uncompromised and esthetic implant placement, renders these procedures more than effective for majority of patients. Surgical reconstruction of the tissues and the procedure of ridge augmentation and subsequent placement of dental implant are necessary.

scholarly journals One-piece Implant Placement as an Alternative and Acceptable Treatment for Missing Tooth Rehabilitation: A Case Report

2021 ◽  
Vol 16 (Supp. 1) ◽  
pp. 67-72
Author(s):  
Paulus Budi Teguh ◽  
Chaterina Diyah Nanik
Keyword(s):  
Case Report ◽  
Soft Tissue ◽  
Female Patient ◽  
Dental Implant ◽  
Implant Placement ◽  
Therapy Choice ◽  
The One ◽  
Bone Height ◽  
Implant Treatment ◽  
Missing Tooth

Currently dental implant treatment become popular. More clinicians are being presented with the opportunity to perform implant services in their own practice. The use of one-piece implant can be considered as treatment for the replacement of missing tooth in the areas of limited tooth-to-tooth spacing and would bring less trauma for the soft tissue. A 52-year-old female patient presented with difficulty in mastication due to the loss of teeth of 35 region with limitation mesio distal space. Radiology examination did not reveal any radiolucencies in 35 region. Radiograph revealed sufficient bone height from crestal to the floor of the mandible. A one-piece implant was placed in the 35 region. The present case used an endosteal implant, one stage surgery, and delayed loading. Restoration with porcelain fused to the metal crown had been delivered three months after the one-piece implant placement. The result of this treatment indicated that one-piece implant could be considered as an effective therapy choice for replacement of missing tooth in order to rehabilitate the masticatory function.

scholarly journals Accuracy of dental implant placement with computer-guided surgery: a retrospective cohort study

2022 ◽  
Vol 22 (1) ◽  
Author(s):  
Jeong-Kui Ku ◽  
Junggon Lee ◽  
Hyo-Jung Lee ◽  
Pil-Young Yun ◽  
Young-Kyun Kim
Keyword(s):  
Dental Implant ◽  
Drop Out ◽  
Cone Beam ◽  
Virtual Planning ◽  
Guided Surgery ◽  
Implant Placement ◽  
Group 2 ◽  
Implant Treatment ◽  
Approach Group ◽  
Group 1

Abstract Background The aim of this study was to assess the accuracy of virtual planning of computer-guided surgery based on the actual outcomes of clinical dental implant placement. Methods This retrospective study enrolled patients among whom implant treatment was planned using computer-guided surgery with cone beam computed tomography (CBCT). The patients who received implant according to the guide with the flapless and flapped approach were classified as group 1 and 2, respectively, and the others who could not be placed according to the guide were allocated to the drop-out group. The accuracy of implant placement was evaluated with the superimposition of CBCT. Results We analyzed differences in the deviated distance of the entrance point and deviated angulation of the insertion of implant fixtures. With regard to the surgical approach, group 2 exhibited greater accuracy compared to group 1 in deviation distance (2.22 ± 0.88 and 3.18 ± 0.89 mm, respectively, P < 0.001) and angulation (4.27 ± 2.30 and 6.82 ± 2.71°, respectively, P = 0.001). The limitations of guided surgery were discussed while considering the findings from the drop-out group. Conclusions Computer-guided surgery demonstrates greater accuracy in implant placement with the flapless approach. Further research should be conducted to enhance the availability of guides for cases with unfavorable residual bone conditions.

Sign in / Sign up

Export Citation Format

Share Document