Size effects in powder compaction

2001 ◽  
Vol 16 (5) ◽  
pp. 1238-1240 ◽  
Author(s):  
J. Gil Sevillano
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Size Effects ◽  
Powder Compaction ◽  
Ultrafine Powders ◽  
Strain Gradients ◽  
Strength Enhancement ◽  
Relative Contribution ◽  
Interparticle Contacts ◽  
Good Agreement

It is well known that great difficulties are encountered in the cold compaction of ultrafine powders. Such difficulties have been qualitatively attributed to several origins (e.g., increasing relative contribution of oxidized layers to particle resistance as particle size decreases). The main densification stage during compaction is governed by plastic deformation at interparticle contacts under pressure. On account of the strength enhancement of plastic resistance in presence of plastic strain gradients (physically resolved by “geometrically necessary dislocations”) a contribution to the size effect on powder compaction efficiency is here predicted. Some quantitative experimental data available are in good agreement with this explanation.

Effects of HMX Particle Size on the Shock Initiation of PBXC03 Explosive

2012 ◽  
Vol 13 (2) ◽  
Author(s):  
Li-Jing Wen ◽  
Zhuo-Ping Duan ◽  
Lian-Sheng Zhang ◽  
Zhen-Yu Zhang ◽  
Zhuo-Cheng Ou ◽  
...  
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Reaction Rate ◽  
Pressure Gauge ◽  
Rate Model ◽  
Shock Initiation ◽  
Gauge Data ◽  
Medium Formulation ◽  
Good Agreement

AbstractA series of shock initiation experiments are performed on the PBXC03 explosives in different formulations to understand the influence of the explosive particle size on the shock initiation, and the in-situ pressure gauge data are obtained which show that shock sensitivity decreases with the explosive particle size under the test condition used in this paper. Moreover, a mesoscopic reaction rate model which is calibrated by the experimental data on a medium formulation PBXC03 explosive is adopted and then applied to predict numerically the shock initiation of other PBXC03 explosives in different formulations. The numerical results are in good agreement with the experimental data.

Pemuatan listrik bipolar untuk partikel aerosol

2018 ◽  
Vol 4 (3) ◽  
pp. 287
Author(s):  
Heru Setyawan
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Ion Mobility ◽  
Opposite Sign ◽  
Aerosol Particles ◽  
Calculation Results ◽  
Two Parameters ◽  
Diffusion Charging ◽  
Fuchs Theory ◽  
Good Agreement

Bipolar diffusion charging of aerosol particles has been studied theoretically using Fuchs theory. Experimental data measured by several researchers available in the published literature were used to verify the calculation results. The calculation results show that Fuchs theory has been successfully used to predict the experimental data of the charging probability of submicron aerosol particles. The combination probability of ion-particle increases with the increase of particle size, both for particle and ion with the same sign and those with the opposite sign. However the combination probability is larger if the charges of particle and ion are of the opposite sign. Generally, Fuchs theory is not too easy to deal with due to the ill-defined of all parameters used, namely ion mass and ion mobility. These cause many possibilities of parameter combination that can give a good agreement with experimental data. Thus, in order to interpret the experimental results properly, the two parameters should be measured simultaneously with aerosol measurements.Keywords: Aerosol, Bipolar Charging, Combination ProbabilityAbstrakPemuatan listrik difusi bipolar partikel aerosol telah dipelajari secara teoritis menggunakan teori Fuchs. Sebagai verifikasi digunakan data eksperimen beberapa peneliti yang tersedia dalam literatur yang telah dipublikasikan. Hasil perhitungan menunjukkan bahwa teori Fuchs berhasil memprediksi dengan baik data eksperimen probabilitas pemuatan listrik partikel aerosol dalam rentang ukuran partikel berukuran submikron. Probabilitas penggabungan ion-partikel semakin besar dengan semakin besarnya ukuran partikel, baik untuk partikel dan ion yang memiliki tanda yang berlawanan maupun yang memiliki tanda yang sama. Akan tetapi, probabilitas penggabungan untuk partikel dan ion yang memiliki tanda yang berlawanan memiliki nilai yang lebih besar. Pada umumnya teori Fuchs tidak terlalu mudah untuk digunakan yang disebabkan oleh tidak terdefinisikannya dengan baik semua parameter yang digunakan, yaitu  massa ion dan mobilitas ion. Hal ini mengakibatkan banyak kemungkinan kombinasi parameter yang bisa menghasilkan kesesuaian yang bagus dengan data hasil pengukuran. Jadi, agar dapat menginterpretasikan hasil pengukuran dengan tepat, kedua besaran tersebut harus diukur secara serempak denganpengukuran aerosol.Kata Kunci: Aerosol, Pemuatan Listrik Bipolar, Probabilitas Penggabungan

Laboratory simulation of light scattering from regolith analogue: Effect of porosity and particle size

2019 ◽  
Vol 15 (S350) ◽  
pp. 372-374
Author(s):  
Amritaksha Kar ◽  
Asoke K Sen
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Light Scattering ◽  
Solar System ◽  
Laboratory Data ◽  
Laboratory Simulation ◽  
Meteorite Impacts ◽  
Composition And Structure ◽  
Solar System Bodies ◽  
Good Agreement

AbstractThe surfaces of most of the atmosphereless solar system bodies are referred to as regolith or layers of usually loosely connected fragmentary debris, produced by meteorite impacts. Measurement of light scattered from such surfaces provide information about the composition and structure of the surface. In the present work, the effect of porosity and particle size, on reflectance is studied for regolith like samples. For modelling the experimental data Hapke 2008 is used and found to be in good agreement with laboratory data. From the present study, it can be concluded that the physical properties of a regolith, such as porosity, particle size etc are effectively represented by albedo.

Phonon Thermal Conductivity of Superlattice Nanowires for Thermoelectric Applications

2003 ◽  
Vol 793 ◽  
Author(s):  
C. Dames ◽  
M. S. Dresselhaus ◽  
G. Chen
Keyword(s):  
Experimental Data ◽  
Thermal Conductivity ◽  
Size Effects ◽  
Three Dimensional ◽  
Small Diameter ◽  
Particle Model ◽  
Phonon Thermal Conductivity ◽  
Alloy Scattering ◽  
Classical Size ◽  
Good Agreement

ABSTRACTAn incoherent particle model has been developed to predict the phonon thermal conductivity of nanowires and superlattice nanowires. It is argued that the surface roughness of most real nanowires prevents the formation of idealized confined dispersion relations for typical temperatures and diameters. Instead, the three-dimensional bulk dispersion is used, thus addressing only classical size effects. Four adjustable parameters capture the effects of diameter, superlattice, Umklapp, impurity, and alloy scattering. Predictions are compared with experimental data for nanowires and superlattice nanowires down to 22 nm diameter and 20 K, and are in good agreement above ∼40 nm diameter. The analysis suggests that ideal low thermal conductivity nanowires for thermoelectric applications would have small-diameter, alternating alloy segments that are acoustically dissimilar but electrically similar.

scholarly journals Modeling the process of grinding feed by the method of damage accumulation

2021 ◽  
Vol 284 ◽  
pp. 02021
Author(s):  
Timmo Gavrilov
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Energy Consumption ◽  
Damage Accumulation ◽  
Optimal Number ◽  
Grinding Process ◽  
Technological Parameters ◽  
Number Of Cycles ◽  
Working Bodies ◽  
Good Agreement

The efficiency of the process of grinding meat and bone feed depends on a number of design and technological parameters of the grinder operation. One of the most significant issues and at the same time the least studied one is the influence of the number of cycles of loading meat and bone feed with the working bodies of grinders on the particle size of the finished meat and bone feed. To study this issue, the authors proposed a method for modeling the process of grinding meat and bone feed using a stochastic B-model of cumulative damage, which is based on an understanding of the process under study at the macroscopic level and experimental data. The constructed B-model made it possible to determine the optimal number of cycles of loading meat and bone feed with the working bodies of the grinders, at which the required particle size of the finished meat and bone feed is 3...5 mm, and there is no unnecessary energy consumption of the grinding process. This number is equal to 12...18 cycles. The results obtained by the B-model are in good agreement with the experimental data. The constructed B-model of the grinding process of meat and bone feed will further help optimizing the operation of the cutting device and reducing energy consumption for the operation of the grinders as a whole.

Effects of HMX Particle Size on the Shock Initiation of PBXC03 Explosive

2012 ◽  
Vol 13 (2) ◽  
Author(s):  
Li-Jing Wen ◽  
Zhuo-Ping Duan ◽  
Lian-Sheng Zhang ◽  
Zhen-Yu Zhang ◽  
Zhuo-Cheng Ou ◽  
...  
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Reaction Rate ◽  
Pressure Gauge ◽  
Rate Model ◽  
Shock Initiation ◽  
Gauge Data ◽  
Medium Formulation ◽  
Good Agreement

AbstractA series of shock initiation experiments are performed on the PBXC03 explosives in different formulations to understand the influence of the explosive particle size on the shock initiation, and the in-situ pressure gauge data are obtained which show that shock sensitivity decreases with the explosive particle size under the test condition used in this paper. Moreover, a mesoscopic reaction rate model which is calibrated by the experimental data on a medium formulation PBXC03 explosive is adopted and then applied to predict numerically the shock initiation of other PBXC03 explosives in different formulations. The numerical results are in good agreement with the experimental data.

scholarly journals Melting of micro/nanoparticles considering anisotropy of surface energy

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
C. M. Yang ◽  
M. W. Chen ◽  
G. J. Zheng ◽  
Z. D. Wang
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Surface Energy ◽  
Asymptotic Solution ◽  
Melting Temperature ◽  
Asymptotic Method ◽  
Crystal Orientations ◽  
Nanoparticle Melting ◽  
Effect Of Surface ◽  
Good Agreement

AbstractThe effect of surface energy on the melting of micro/nanoparticles is studied using the asymptotic method. The asymptotic solution of the dynamic model for micro/nanoparticle melting reveals the dependence of the particle melting temperature on the particle size and the anisotropy of surface energy. Specifically, as the particle radius decreases, the isotropic surface energy reduces the melting temperature and accelerates the interface melting of the particle. Along certain crystal orientations, the anisotropy of surface energy enhances the melting temperature of the micro/nanoparticles, whereas depresses the melting temperature of the micro/nanoparticle along other crystal orientations. The anisotropy of surface energy enhances the melting speed of the micro/nanoparticles along certain crystal orientations, whereas reduces the melting speed of the micro/nanoparticles along other crystal orientations. The result of the asymptotic solution is in good agreement with the experimental data.

scholarly journals Effects of HMX Particle Size on the Shock Initiation of PBXC03 Explosive

2012 ◽  
Vol 13 (2) ◽  
pp. 189-194
Author(s):  
Li-Jing Wen ◽  
Zhuo-Ping Duan ◽  
Lian-Sheng Zhang ◽  
Zhen-Yu Zhang ◽  
Zhuo-Cheng Ou ◽  
...  
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Reaction Rate ◽  
Pressure Gauge ◽  
Rate Model ◽  
Shock Initiation ◽  
Gauge Data ◽  
Medium Formulation ◽  
Good Agreement

Abstract A series of shock initiation experiments are performed on the PBXC03 explosives in different formulations to understand the influence of the explosive particle size on the shock initiation, and the in-situ pressure gauge data are obtained which show that shock sensitivity decreases with the explosive particle size under the test condition used in this paper. Moreover, a mesoscopic reaction rate model which is calibrated by the experimental data on a medium formulation PBXC03 explosive is adopted and then applied to predict numerically the shock initiation of other PBXC03 explosives in different formulations. The numerical results are in good agreement with the experimental data.

scholarly journals Modeling of Microsegregation and Homogenization of 6xxx Al-Alloys Including Precipitation and Strengthening During Homogenization Cooling

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1421 ◽  
Author(s):  
Panagiota I. Sarafoglou ◽  
Alexandros Serafeim ◽  
Ioannis A. Fanikos ◽  
John S. Aristeidakis ◽  
Gregory N. Haidemenopoulos
Keyword(s):  
Experimental Data ◽  
Solid Solution ◽  
Particle Size ◽  
Aluminum Alloys ◽  
Multicomponent Diffusion ◽  
Al Alloys ◽  
Precipitation Strengthening ◽  
Process Chain ◽  
Grain Model ◽  
Good Agreement

Control of the homogenization process is important in obtaining high extrudability and desirable properties in 6xxx aluminum alloys. Three consecutive steps of the process chain were modeled. Microsegregation arising from solidification was described with the Scheil–Gulliver model. Dissolution of Mg2Si, Si (diamond) and β-AlFeSi (β-Al5FeSi) to α-AlFeSi (α-Al12(FeMn)3Si) transformation during homogenization have been described with a CALPHAD-based multicomponent diffusion Dual-Grain Model (DGM), accounting for grain size inhomogeneity. Mg2Si precipitation and associated strengthening during homogenization cooling were modeled with the Kampmann–Wagner Numerical (KWN) precipitation framework. The DGM model indicated that the fractions of β-AlFeSi and α-AlFeSi exhibit an exact spatial and temporal correspondence during transformation. The predictions are in good agreement with experimental data. The KWN model indicated the development of a bimodal particle size distribution during homogenization cooling, arising from corresponding nucleation events. The associated strengthening, arising from solid solution and precipitation strengthening, was in good agreement with experimental results. The proposed modeling approach is a valuable tool for the prediction of microstructure evolution during the homogenization of 6xxx aluminum alloys, including the often-neglected part of homogenization cooling.

Energy Levels and Electromagnetic Transition of 90-94mo Nuclei Using Ibm-1

2020 ◽  
pp. 149-152
Keyword(s):  
Experimental Data ◽  
Transition Probability ◽  
Energy Levels ◽  
Dynamical Symmetry ◽  
Interacting Boson Model ◽  
Excitation Energies ◽  
Electromagnetic Transition ◽  
Boson Model ◽  
Energy States ◽  
Good Agreement

The energy states for the J , b , ɤ bands and electromagnetic transitions B (E2) values for even – even molybdenum 90 – 94 Mo nuclei are calculated in the present work of "the interacting boson model (IBM-1)" . The parameters of the equation of IBM-1 Hamiltonian are determined which yield the best excellent suit the experimental energy states . The positive parity of energy states are obtained by using IBS1. for program for even 90 – 94 Mo isotopes with bosons number 5 , 4 and 5 respectively. The" reduced transition probability B(E2)" of these neuclei are calculated and compared with the experimental data . The ratio of the excitation energies of the 41+ to 21+ states ( R4/2) are also calculated . The calculated and experimental (R4/2) values showed that the 90 – 94 Mo nuclei have the vibrational dynamical symmetry U(5). Good agreement was found from comparison between the calculated energy states and electric quadruple probabilities B(E2) transition of the 90–94Mo isotopes with the experimental data .

Sign in / Sign up

Export Citation Format

Share Document