Highly oriented diamond growth on positively biased Si substrates

2001 ◽  
Vol 16 (12) ◽  
pp. 3351-3354 ◽  
Author(s):  
Te-Fu Chang ◽  
Li Chang
Keyword(s):  
Electron Microscopy ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Plasma Chemical Vapor Deposition ◽  
Si Substrates ◽  
Transmission Electron

Deposition of highly textured diamond films on Si(001) has been achieved by using positively bias-enhanced nucleation in microwave plasma chemical vapor deposition. During the biasing period, an additional glow discharge due to the dc plasma effect appeared between the electrode and the substrate. The discharge is necessary for enhanced nucleation of diamond. X-ray diffraction, scanning electron microscopy, and cross-sectional transmission electron microscopy (XTEM) were used to characterize the microstructure of the diamond films on Si. The results show the morphology of diamond grains in square shape with strong diamond (001) texture. XTEM reveals that an amorphous interlayer formed on the smooth Si surface before diamond nucleation.

A Study of the Origin of Band-A Emission in Homoepitaxial Diamond Thin Films

1999 ◽  
Vol 588 ◽  
Author(s):  
Daisuke Takeuchi ◽  
Hideyuki Watanabe ◽  
Sadanori Yamanaka ◽  
Hideyo Okushi ◽  
Koji Kajimura ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Grain Boundaries ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Plasma Chemical Vapor Deposition ◽  
Transmission Electron ◽  
Excitonic Emission

AbstractThe band-A emission (around 2.8 eV) observed in high quality (device-grade) homoepitaxial diamond films grown by microwave-plasma chemical vapor deposition (CVD) was studied by means of scanning cathodoluminescence spectroscopy and high-resolution transmission electron microscopy. Recent progress in our study on homoepitaxial diamond films was obtained through the low CH4/H2 conditions by CVD. These showed atomically flat surfaces and the excitonic emission at room temperature, while the band-A emission (2.95 eV) decreased. Using these samples, we found that the band-A emission only appeared at unepitaxial crystallites (UC) sites, while other flat surface parts still showed the excitonic emission. High-resolution transmission electron microscopy revealed that there were grain boundaries which contained π-bonds in UC. This indicates that one of the origin of the band-A emission in diamond films is attributed to π bonds of grain boundaries.

Heteroepitaxy of diamond on c-BN: Growth mechanisms and defect characterization

1994 ◽  
Vol 9 (7) ◽  
pp. 1849-1865 ◽  
Author(s):  
Alberto Argoitia ◽  
John C. Angus ◽  
Jing S. Ma ◽  
Long Wang ◽  
Pirouz Pirouz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cubic Boron Nitride ◽  
Three Dimensional ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
Defect Characterization ◽  
Cross Sectional ◽  
Transmission Electron ◽  
High Resolution Tem

Diamond films grown on {100}, {111} boron-terminated, and nitrogen-terminated facets of cubic boron nitride (c-BN) single crystals were characterized by Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The evolution of morphology and microstructure of the diamond films at different stages during the growth process were followed by SEM investigation. The results indicate that diamond growth proceeds by nucleation of oriented three-dimensional islands followed by their coalescence. Cross-sectional TEM specimens were prepared from thick (over 10 μm) continuous diamond films grown on {111} boron-terminated surfaces. Selected-area diffraction and high resolution TEM images show that the diamond film has a parallel orientation relationship with respect to the substrate. Characteristic defects, common to diamond films obtained by chemical vapor deposition on other substrates, are also discussed.

Morphology of heavily B-doped diamond films

1993 ◽  
Vol 8 (11) ◽  
pp. 2845-2857 ◽  
Author(s):  
Koichi Miyata ◽  
Kazuo Kumagai ◽  
Kozo Nishimura ◽  
Koji Kobashi
Keyword(s):  
Vapor Deposition ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
X Ray Diffraction ◽  
Plasma Chemical ◽  
X Ray ◽  
Plasma Chemical Vapor Deposition ◽  
Si Substrates ◽  
Surface Morphologies

B-doped diamond films were synthesized by microwave plasma chemical vapor deposition using a mixture of methane (0.5% or 1.2%) and diborane (B2H6) below 50 ppm on either Si substrates or undoped diamond films that had been synthesized using 0.5% or 1.2% methane. The surface morphologies of the synthesized films were observed by Secondary Electron Microscopy, and the infrared absorption and Raman spectra were measured. It was found that when diborane concentration was low, B-doped films preferred (111) facets. On the other hand, high diborane concentrations resulted in a deposition of needle-like material that was identified as graphite by x-ray diffraction.

Growth of highly (111)-oriented, highly coalesced diamond films on platinum (111) surface: A possibility of heteroepitaxy

1996 ◽  
Vol 11 (12) ◽  
pp. 2955-2956 ◽  
Author(s):  
Yoshihiro Shintani
Keyword(s):  
Electron Microscopy ◽  
Vapor Deposition ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
X Ray Diffraction ◽  
Plasma Chemical ◽  
X Ray ◽  
Plasma Chemical Vapor Deposition ◽  
Scanning Electron

A highly (111)-oriented, highly coalesced diamond film was grown on platinum (111) surface by microwave plasma chemical vapor deposition (MPCVD). Scanning electron microscopy and x-ray diffraction analyses revealed that the (111) diamond facets were azimuthally oriented epitaxially with respect to the orientation of the Pt(111) domain underneath, with the neighboring facets of diamond being coalesced with each other. The film was confirmed as diamond using Raman spectroscopy.

Evolution of surface relief of epitaxial diamond films upon growth resumption by microwave plasma chemical vapor deposition

CrystEngComm ◽  
2020 ◽  
Vol 22 (12) ◽  
pp. 2138-2146 ◽  
Author(s):  
G. Shu ◽  
V. G. Ralchenko ◽  
A. P. Bolshakov ◽  
E. V. Zavedeev ◽  
A. A. Khomich ◽  
...  
Keyword(s):  
Vapor Deposition ◽  
Surface Relief ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
Plasma Chemical ◽  
Plasma Chemical Vapor Deposition ◽  
Step Growth ◽  
Growth Features

Homoepitaxial diamond growth may proceed with stops and resumptions to produce thick crystals. We found the resumption procedure to take place in a complex way, via a disturbance of step growth features, followed by the recovery after a certain time.

Growth of Highly (110) Oriented Diamond Film by Microwave Plasma Chemical Vapor Deposition

2018 ◽  
Vol 281 ◽  
pp. 893-899 ◽  
Author(s):  
Yi Fan Xi ◽  
Jian Huang ◽  
Ke Tang ◽  
Xin Yu Zhou ◽  
Bing Ren ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Nucleation Density ◽  
Plasma Chemical ◽  
Plasma Chemical Vapor Deposition ◽  
Si Substrates ◽  
Nucleation Stage

In this study, we propose a simple and effective approach to enhance (110) orientation in diamond films grown on (100) Si substrates by microwave plasma chemical vapor deposition. It is found that the crystalline structure of diamond films strongly rely on the CH4 concentration in the nucleation stage. Under the same growth condition, when the CH4 concentration is less than 7% (7%) in the nucleation stage, the diamond films exhibit randomly oriented structure; once the value exceeds 7%, the deposited films are strongly (110) oriented. It could be verified by experiments that the formation of (110) orientation in diamond films are related to the high nucleation density and high fraction of diamond-like carbon existing in nucleation samples.

The nucleation and growth of nano-structured diamond on phosphor and boron ions implanted Si substrates

2002 ◽  
Vol 750 ◽  
Author(s):  
C. Z. Gu ◽  
L. Wei ◽  
Y. Sun ◽  
J. K. Jia ◽  
Z. S. Jin
Keyword(s):  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Nucleation Density ◽  
Plasma Chemical Vapor Deposition ◽  
Si Substrates ◽  
Grain Sizes ◽  
Boron Ions ◽  
Size And Morphology ◽  
Carbon Network

ABSTRACTNanocrystalline diamond films deposited by microwave plasma chemical vapor deposition (MWPCVD) method were observed on Si substrates implanted with phosphor (P) and boron (B) ions at room temperature via scanning electron microscopy (SEM). The relations between the species, energies and doses of implanted impurities and the nucleation, grain size and morphology of diamond were studied. The results present that different nucleation density from 106 cm-2 to 109 cm-2 can be obtained on implanted and unscratched Si, which is larger of 3–6 magnitude orders than that on mirror-polished Si. The nano-structured diamond films can be deposited on scratched Si substrates implanted by higher concentration of phosphor and boron ions. The grain sizes of nano-structured films can be adjusted by controlling the implanted energies and doses, and nano-structured films can be synthesized with low impressive stress. The Raman spectroscopy was employed to analysis the phase purity of nano-structured film, which shows a broad peak at around 1150 cm-1 relative to the nano-structured and tetrahedrally bonded carbon network.

X-ray Photoelectron Spectroscopy of the Interface Between Diamond Films and Tantalum Substrates

1993 ◽  
Vol 317 ◽  
Author(s):  
M.M. Waitew ◽  
S. Ismat Shah
Keyword(s):  
Photoelectron Spectroscopy ◽  
Microwave Plasma ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Diamond Growth ◽  
Plasma Chemical ◽  
X Ray ◽  
Plasma Chemical Vapor Deposition ◽  
Stages Of Growth ◽  
Diamond Peak

ABSTRACTDiamond films were deposited in a microwave plasma chemical vapor deposition (MPCVD) system on Ta substrates using a mixture of hydrogen and methane gases. The films were grown for varying lengths of time to provide samples with no diamond growth to a continuous diamond film. These films were analyzed using X-ray photoelectron spectroscopy (XPS) in order to understand the time dependent interactions between the substrate and the incoming carbon flux. Photoelectron peaks in the Ta 4f, C Is and Ols regions have been analyzed. In the initial stages of growth, a layer of carbide forms on the substrate. As the substrate becomes supersaturated with carbon, graphite starts to form on the surface. A diamond peak begins to appear after about 30 Minutes of deposition.

scholarly journals Structural Property Study for GeSn Thin Films

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3645
Author(s):  
Liyao Zhang ◽  
Yuxin Song ◽  
Nils von den Driesch ◽  
Zhenpu Zhang ◽  
Dan Buca ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Molecular Beam ◽  
Chemical Vapor ◽  
Threading Dislocations ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Transmission Electron

The structural properties of GeSn thin films with different Sn concentrations and thicknesses grown on Ge (001) by molecular beam epitaxy (MBE) and on Ge-buffered Si (001) wafers by chemical vapor deposition (CVD) were analyzed through high resolution X-ray diffraction and cross-sectional transmission electron microscopy. Two-dimensional reciprocal space maps around the asymmetric (224) reflection were collected by X-ray diffraction for both the whole structures and the GeSn epilayers. The broadenings of the features of the GeSn epilayers with different relaxations in the ω direction, along the ω-2θ direction and parallel to the surface were investigated. The dislocations were identified by transmission electron microscopy. Threading dislocations were found in MBE grown GeSn layers, but not in the CVD grown ones. The point defects and dislocations were two possible reasons for the poor optical properties in the GeSn alloys grown by MBE.

Effect of oxygen vacancies on the surface morphology and structural properties of WO3– x nanoparticles

2019 ◽  
Vol 9 (7) ◽  
pp. 773-777 ◽  
Author(s):  
Zhiguang Yang ◽  
Chaosheng Zhu ◽  
Zhiqiang Hou ◽  
Peng Peng
Keyword(s):  
Electron Microscopy ◽  
Active Sites ◽  
Oxygen Vacancies ◽  
Microwave Plasma ◽  
Chemical Vapor ◽  
Diffraction Field ◽  
Chemical Vapor Deposition Method ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Effect Of Oxygen

WO3 is an essential material for energy storage and catalytical technology, the oxygen vacancies level will play an essential role in its potential application. In this paper, porous tungsten oxide (WO3–x) with various oxygen contents was quickly fabricated by a microwave plasma-enhanced chemical vapor deposition method. A detailed characterization of structure and morphology features with the plasma handling process was recorded by X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy, respectively. The etching mechanism of porous WO3–x under H2 plasma was discussed based on the systemically characterization. These results will help us to design the active sites or structure in the metal oxide materials.

Sign in / Sign up

Export Citation Format

Share Document