Synthesis and Characterization of Plasma Synthesized Nanostructured Magnesia-Yttria Based Nanocomposites

2007 ◽  
Vol 1056 ◽  
Author(s):  
Jafar F. Al-Sharab ◽  
Rajendra Sadangi ◽  
Vijay Shukla ◽  
Bernard Kear
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Chemical Mapping ◽  
X Ray Diffraction ◽  
Fine Grained ◽  
Transmission Electron ◽  
Spray Method ◽  
Average Grain Size

ABSTRACTPolycrystalline Y2O3 is the material of choice for IR windows since it has excellent optical properties in the visible, and near infra-red band. However, current processing methods yield polycrystalline Y2O3 with large grain size (> 100 μm), which limits the hardness and erosion resistance attainable. One way to improve strength is to develop an ultra-fine grained material with acceptable optical transmission properties. To realize a fine-grained ceramic, one approach is to develop a composite structure, in which one phase inhibits the growth of the other phase during processing. In this study, Y2O3-MgO nanocomposite with various MgO content (20, 50 and 80 mol%) were synthesized using plasma spray method. Extensive characterization techniques including x-ray diffraction, scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Energy Dispersive spectrometry (EDS) were employed to study the synthesized powder as well as the consolidated sample. Transmission Electron Microscopy, as well as EDS chemical mapping, revealed that the consolidated sample have bi-continuous MgO-Y2O3 nanostructure with an average grain size of 200 nm.

scholarly journals Monolithic nanocrystalline Au fabricated by the compaction of nanoscale foam

2005 ◽  
Vol 20 (3) ◽  
pp. 554-557 ◽  
Author(s):  
A.M. Hodge ◽  
J. Biener ◽  
L.L. Hsiung ◽  
Y.M. Wang ◽  
A.V. Hamza ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
X Ray Diffraction ◽  
Depth Sensing ◽  
Compaction Process ◽  
X Ray ◽  
Transmission Electron ◽  
Average Grain Size ◽  
Hardness Values

We describe a two-step dealloying/compaction process to produce nanocrystalline Au. First, nanocrystalline/nanoporous Au foam was synthesized by electrochemically driven dealloying. The resulting Au foams exhibited porosities of ∼60% with pore sizes of 40 and 100 nm and a typical grain size of <50 nm. Second, the nanoporous foams were fully compacted to produce nanocrystalline monolithic Au. The compacted Au was characterized by transmission electron microscopy and x-ray diffraction and tested by depth-sensing nanoindentation. The compacted nanocrystalline Au exhibited an average grain size of <50 nm and hardness values ranging from 1.4 to 2.0 GPa, which were up to 4.5 times higher than the hardness values obtained from polycrystalline Au.

Detonation Synthesis of Nano-Size Materials

1995 ◽  
Vol 418 ◽  
Author(s):  
J. Forbes ◽  
J. Davis ◽  
C. Wong
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nucleation And Growth ◽  
Detonation Synthesis ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size

AbstractThe detonation of explosives typically creates 100's of kbar pressures and 1000's K temperatures. These pressures and temperatures last for only a fraction of a microsecond as the products expand. Nucleation and growth of crystalline materials can occur under these conditions. Recovery of these materials is difficult but can occur in some circumstances. This paper describes the detonation synthesis facility, recovery of nano-size diamond, and plans to synthesize other nano-size materials by modifying the chemical composition of explosive compounds. The characterization of nano-size diamonds by transmission electron microscopy and electron diffraction, X-ray diffraction and Raman spectroscopy will also be reported.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Understanding the Growth Mechanisms of Tin Oxide Nanowires by Chemical Vapor Deposition

2021 ◽  
Vol 21 (4) ◽  
pp. 2538-2544
Author(s):  
Nguyen Minh Hieu ◽  
Nguyen Hoang Hai ◽  
Mai Anh Tuan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Chemical Mapping ◽  
X Ray Diffraction ◽  
Lattice Constants ◽  
Transmission Electron ◽  
Scanning Transmission

Tin oxides nanowires were prepared by chemical vapor deposition using shadow mask. X-ray diffraction indicated that the products were tetragonal having crystalline structure with lattice constants a = 0.474 nm and c = 0.318 nm. The high-resolution transmission electron microscopy revealed that inter planar spacing is 0.25 nm. The results chemical mapping in scanning transmission electron microscopy so that the two elements of Oxygen and Tin are distributed very homogeneously in nanowires and exhibit no apparent elements separation. A bottom-up mechanism for SnO2 growth process has been proposed to explain the morphology of SnO2 nanowires.

scholarly journals Structural characterization of Yba2Cu3O7–δ/Y2O3 composite films

1998 ◽  
Vol 13 (4) ◽  
pp. 954-958 ◽  
Author(s):  
P. R. Broussard ◽  
M. A. Wall ◽  
J. Talvacchio
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Coincidence Site Lattice ◽  
Composite Films ◽  
X Ray Diffraction ◽  
Plane Orientation ◽  
Transmission Electron ◽  
Two Phases ◽  
High Degree

Using 4-circle x-ray diffraction and transmission electron microscopy, we have studied the microstructure and in-plane orientation of the phases present in thin film composite mixtures of Yba2Cu3O7–δ and Y2O3. We see a high degree of in-plane orientation and have verified a previous prediction for the in-plane order of Y2BaCuO5 on (110) MgO. Transmission electron microscopy shows the composite films to be a mixture of two phases, with YBCO grain sizes of ≈1 μm. We have also compared our observations of the in-plane order to the predictions of a modified near coincidence site lattice model.

TEM Study of FePt and FePt:C/FePt Composite Double-Layered Thin Films

2013 ◽  
Vol 275-277 ◽  
pp. 1952-1955
Author(s):  
Ling Fang Jin ◽  
Xing Zhong Li
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Grain Size ◽  
Magnetic Properties ◽  
Composite Layer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

New functional nanocomposite FePt:C thin films with FePt underlayers were synthesized by noneptaxial growth. The effect of the FePt layer on the ordering, orientation and magnetic properties of the composite layer has been investigated by adjusting FePt underlayer thickness from 2 nm to 14 nm. Transmission electron microscopy (TEM), together with x-ray diffraction (XRD), has been used to check the growth of the double-layered films and to study the microstructure, including the grain size, shape, orientation and distribution. XRD scans reveal that the orientation of the films was dependent on FePt underlayer thickness. In this paper, the TEM studies of both single-layered nonepitaxially grown FePt and FePt:C composite L10 phase and double-layered deposition FePt:C/FePt are presented.

Characterization of Amorphized Zeolite A by Combining High-Energy X-ray Diffraction and High-Resolution Transmission Electron Microscopy

2012 ◽  
Vol 116 (48) ◽  
pp. 25293-25299 ◽  
Author(s):  
Kaku Sato ◽  
Toru Wakihara ◽  
Shinji Kohara ◽  
Koji Ohara ◽  
Junichi Tatami ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
High Energy ◽  
Zeolite A ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Growth and Characterization of Misostructural Zinc Oxide Tubes

2005 ◽  
Vol 23 ◽  
pp. 293-296
Author(s):  
X.W. Sun ◽  
C.X. Xu ◽  
B.J. Chen ◽  
Y. Yang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Zinc Oxide ◽  
Growth Process ◽  
Hexagonal Structure ◽  
Metallic Zinc ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Zinc oxide (ZnO) microtube has been fabricated by heating the mixture of ZnO and graphite powders in the atmosphere. The ZnO microtubes showed perfect hexagonal profiles with bell-mouth or normal hexagonal tops. Both X-ray diffraction (XRD) and high-resolution transmission electron microscopy (TEM) demonstrated that the product was composed of ZnO with typical hexagonal structure grown predominantly along (002) direction. The growth process was interpreted by means of vaporliquid-solid mechanism combining with the evaporation of metallic zinc.

Sign in / Sign up

Export Citation Format

Share Document